From: Arkadiusz Miskiewicz <arekm@pld-linux.org>
To: Andrew de Quincey <adq_dvb@lidskialf.net>
Cc: linux-kernel@vger.kernel.org
Subject: acpi-irq-fixes from test5-mm1 broken with acpi=off
Date: Tue, 9 Sep 2003 15:18:07 +0200 [thread overview]
Message-ID: <200309091518.07368.arekm@pld-linux.org> (raw)
Hi,
I've tried vanilla test5 + your acpi-irq-fixes patch found here:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm1/broken-out/acpi-irq-fixes.patch
It changes things when comparingo to test5 - for more see:
- vanilla test5 dmesg: http://lkml.org/lkml/2003/9/9/31
- test5+acpi-irq-fixes dmesg: http://lkml.org/lkml/2003/9/9/56
Now the problem is that with vanilla test5 acpi=off works well - see dmesg
http://lkml.org/lkml/2003/9/9/31 but after applying acpi-irq-fixes I get:
Loading pld-2.6.0..........................
BIOS data check successful
Linux version 2.6.0 (builder@beton) (gcc version 3.3.1 (PLD Linux)) #1 Tue Sep
9 09:02:07 UTC 2003
Video mode to be used for restore is f07
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
BIOS-e820: 000000000eff0000 - 000000000eff8000 (ACPI data)
BIOS-e820: 000000000eff8000 - 000000000f000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
239MB LOWMEM available.
On node 0 totalpages: 61424
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 57328 pages, LIFO batch:13
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=pld-2.6.0 ro root=303 console=ttyS0,57600n81
console=tty0 acpi=off
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1533.495 MHz processor.
Console: colour VGA+ 80x60
Memory: 239664k/245696k available (1661k kernel code, 5336k reserved, 679k
data, 164k init, 0k highmem)
Calibrating delay loop... 3022.84 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Not enabled at boot.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP-M 1800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7710
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x673b, dseg 0xf0000
PnPBIOS: Unknown tag '0x82', length '22'.
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c01cd217
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01cd217>] Not tainted
EFLAGS: 00010246
EIP is at acpi_pci_link_calc_penalties+0x29/0xad
eax: c0387dc0 ebx: 00000000 ecx: 00000000 edx: c03881c0
esi: 00000001 edi: 00000000 ebp: cefa3fa0 esp: cefa3f98
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=cefa2000 task=cefa18c0)
Stack: 00000000 00000001 cefa3fac c035b3cc c037130c cefa3fb8 c0368aa3 c0371308
cefa3fd4 c034c7bc cefa3fcc c0130432 c02af2be cefa2000 00000000 cefa3fec
c01050a1 00000000 c0105070 00000000 00000000 00000000 c0109259 00000000
Call Trace:
[<c035b3cc>] acpi_pci_irq_init+0xb/0x47
[<c0368aa3>] pci_acpi_init+0x23/0x60
[<c034c7bc>] do_initcalls+0x2c/0xa0
[<c0130432>] init_workqueues+0x12/0x60
[<c01050a1>] init+0x31/0x1d0
[<c0105070>] init+0x0/0x1d0
[<c0109259>] kernel_thread_helper+0x5/0xc
Code: 8b 01 74 04 0f 18 00 90 81 f9 cc 81 38 c0 74 6b 0f b6 41 10
<0>Kernel panic: Attempted to kill init!
--
Arkadiusz Miśkiewicz CS at FoE, Wroclaw University of Technology
arekm.pld-linux.org AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux
next reply other threads:[~2003-09-09 13:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-09 13:18 Arkadiusz Miskiewicz [this message]
2003-09-09 13:32 ` acpi-irq-fixes from test5-mm1 broken with acpi=off Andrew de Quincey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200309091518.07368.arekm@pld-linux.org \
--to=arekm@pld-linux.org \
--cc=adq_dvb@lidskialf.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.