All of lore.kernel.org
 help / color / mirror / Atom feed
From: Olaf Hering <olh@suse.de>
To: "Daniël Mantione" <daniel@deadlock.et.tudelft.nl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
	Marcelo Tosatti <marcelo.tosatti@cyclades.com.br>,
	Linux Kernel Development <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.4.23-pre4: failed at atyfb_base.c
Date: Mon, 15 Sep 2003 23:34:30 +0200	[thread overview]
Message-ID: <20030915213430.GA1833@suse.de> (raw)
In-Reply-To: <Pine.LNX.4.44.0309152308410.24675-100000@deadlock.et.tudelft.nl>

 On Mon, Sep 15, Daniël Mantione wrote:

> 
> 
> On Mon, 15 Sep 2003, Olaf Hering wrote:
> 
> > pre4 doesnt work on my ibook1, the xclk value is 125, but should be 50.
> 
> That is not correct. The default xclk for the Rage Mobility M1 is
> 125 MHz and this is indeed the case, for example on Geert's VAIO.
> See also the e-mail below from Vernon Chiang from ATi.
> 
> On x86, I usually ask a copy of the video driver to be able to check the
> driver information table of that particular implementation. Do you have
> something similair from the Open Firmware?

This is in the device tree, not very helpful. I'm not sure where XFree86
gets the value 50. It seems to poke some regs here and there, havent
looked too closely.

olaf@mango:/proc/device-tree/pci@f0000000/ATY,RageM_Lp@10> /sbin/lsprop
vendor-id        00001002 (4098)
device-id        00004c4e (19534)
revision-id      00000064 (100)
class-code       00030000 (196608)
interrupts       00000001
min-grant        00000008
max-latency      00000000
devsel-speed     00000001
fast-back-to-back
ATY,Status       00000000
ATY,Flags        00000180 (384)
width            00000320 (800)
height           00000258 (600)
depth            00000008
linebytes        00000320 (800)
device_type      "display"
character-set    "ISO8859-1"
iso6429-1983-colors
reg              00008000 00000000 00000000 00000000 00000000
                 02008030 00000000 00000000 00000000 00020000
                 02008010 00000000 00000000 00000000 01000000
                 02008018 00000000 00000000 00000000 00001000
AGP_Address_Range 00000000 ffffffff
AGP_Address_Block 02000000 (33554432)
AGP_Alignment    02000000 (33554432)
AGP_AllowOverlap 00000001
name             "ATY,RageM_Lp"
model            "ATY,RageMobilityL"
ATY,Rom#         "113-XXXXX-110"
backlight-control 00000001 00000000
ATY,Fcode        "1.69"
assigned-addresses 82008010 00000000 91000000 00000000 01000000
                 82008030 00000000 90020000 00000000 00020000
                 82008018 00000000 90000000 00000000 00001000
AGP_Master
driverID         "RageMobility_L 1.0b32"
address          91000000
AAPL,gray-page   00000000
linux,phandle    ff93b3f8


All I see is that 50 works, 125 gives black/white stripes and a large
blinking cursor.

-- 
USB is for mice, FireWire is for men!

sUse lINUX ag, nÜRNBERG

  parent reply	other threads:[~2003-09-15 21:34 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-09-12 19:48 Linux 2.4.23-pre4 Marcelo Tosatti
2003-09-12 21:44 ` aa VM updates merged was: " Mike Fedyk
2003-09-13 12:44 ` Linux 2.4.23-pre4: failed at atyfb_base.c Eyal Lebedinsky
2003-09-13 14:39   ` Geert Uytterhoeven
2003-09-13 17:52     ` Daniël Mantione
2003-09-14  8:44       ` Geert Uytterhoeven
2003-09-13 19:16     ` Marcelo Tosatti
2003-09-15 21:04     ` Olaf Hering
2003-09-15 21:19       ` Daniël Mantione
2003-09-15 21:28         ` Daniël Mantione
2003-09-15 21:34         ` Olaf Hering [this message]
2003-09-15 21:44           ` Daniël Mantione
2003-09-13 21:39 ` Linux 2.4.23-pre4 Willy Tarreau
2003-09-14 11:34 ` Linux 2.4.23-pre4 => NFSD problem on alpha Willy Tarreau
2003-09-14 11:48   ` Neil Brown
2003-09-14 12:15     ` Willy Tarreau
2003-09-14 16:55       ` Chris Kloiber
2003-09-14 21:28         ` Willy Tarreau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030915213430.GA1833@suse.de \
    --to=olh@suse.de \
    --cc=daniel@deadlock.et.tudelft.nl \
    --cc=geert@linux-m68k.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcelo.tosatti@cyclades.com.br \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.