From: John Wong <kernel@implode.net>
To: linux-kernel@vger.kernel.org
Subject: via-rhine on 2.4.23-pre6 Too much work at interrupt, status=0x00001000.
Date: Thu, 16 Oct 2003 12:27:17 -0700 [thread overview]
Message-ID: <20031016192717.GA2749@gambit.implode.net> (raw)
The system used to run 2.4.22 and did not have this too much work
problem. There were some other hardware changes. The system used to be
a Pentium 100 on a Triton 430FX chipset Intel Advanced/EV board. Now it
is a K6 2 - 500 on a Via Apollo MVP3 chipset on FIC VA-503+ board.
The NIC stayed the same. The kernel was recompiled and ACPI was
enabled.
I noticed in 2.4.23-pre2 -> pre3
[netdrvr] sync with 2.5: epic100, fealnx, via-rhine, winbond-840
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT86C100A Rhine at 0xe4001000, 00:80:c8:d3:36:a6, IRQ 10.
eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 40a1.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
eth0: Too much work at interrupt, status=0x00001000.
John
reply other threads:[~2003-10-16 19:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031016192717.GA2749@gambit.implode.net \
--to=kernel@implode.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.