Re: patch, and other via82xx (VT8235) capture problems

[Zinx Verituse <zinx@epicsol.org>]

On Fri, Oct 24, 2003 at 03:14:44PM +0200, Takashi Iwai wrote:
> At Thu, 23 Oct 2003 20:05:02 -0500,
> Zinx Verituse wrote:
> > 
> > Any ideas on the problem with me not being able to record
> > if the Input Source is set to Mic?
> > 
> > arecord records when it's set to Line (as it was forced, before),
> > and does playback as well..
> > 
> > When it's set to Mic, I get no playback from a Mic (and I'm not
> > wanting to hook up powered output in to the jack when it's set
> > to Mic), but I suspect it's still Line-in, and the register
> > being twiddled isn't right, or needs some more setup.
> > 
> > arecord waits a bit, then gives the error I mentioned:
> > arecord: pcm_read:1110: read error: Input/output error
> > 
> > dmesg says nothing :/
> > 
> > If nothing else, the settings do have to do with the actual
> > capture sources (idx 0 vs. idx 1), because when I set idx 0
> > to mic, it can't record, but idx 1 can, and when I set idx 1
> > to mic, it can't record, but idx 0 can.  When both are set
> > to mic, neither can record.
> 
> sorry, could you elaborate this?  i'm confused.
> did you try hw:0,0 and hw:0,1, right?
> 

Yeah, hw:0,0 fails when Input Source idx 0 is set to Mic,
and hw:0,1 fails when Input Source idx 1 is set to Mic.

> 
> Takashi
> 

-- 
Zinx Verituse


-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community?  Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/