From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marcel Telka <marcel@telka.sk>
Date: Sat, 1 Nov 2003 19:27:37 +0100
Subject: [U-Boot-Users] ocdemon for initial u-boot flashing?
In-Reply-To: <r02000200-1028-ACC9C0050C9411D8BD5B00039387ACB6@[10.0.1.1]>; from richard.klingler@violasystems.com on So, nov 01, 2003 at 18:56:09 +0100
References: <r02000200-1028-ACC9C0050C9411D8BD5B00039387ACB6@[10.0.1.1]>
Message-ID: <20031101182737.GC11565@aragorn.etc.sk>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Richard.

On 01.11.2003 18:56, Richard Klingler wrote:
> Good evening..
> 
> 
> Small off-topic question (o;
> 
> 
> Someone using OCDemon flash programmer for initial flashing
> of u-boot to a 8260 board?
> 
> 
> Installed the demo version and it keeps saying that it can't
> run target code...or is unable to write to RAM location...
> 
> Was only once able to erase an existing old firmware...but that's all.
> Seems it needs some more initialisation than those offered
> in the software...
> 
> 
> Wrote a simple jtag flash program for Linux/Windows to do
> JTAG flashing but it takes some time for programming though (o;

Try <http://openwince.sourceforge.net/jtag/>


Regards.

-- 
+-------------------------------------------+
| Marcel Telka   e-mail:   marcel at telka.sk  |
|                homepage: http://telka.sk/ |
|                jabber:   marcel at jabber.sk |
+-------------------------------------------+