From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 From: "marduk" Message-Id: <20031106123527.B08897F524@server2.messagingengine.com> Subject: [linux-lvm] Help, /usr will not mount! Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Thu Nov 6 06:36:01 2003 List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-lvm@sistina.com I just lost /usr. Please someone tell me it can be restored. The thing is, I am attempting to move my drives to another system. My two SCSI drives are smaller and older and the new system has no SCSI adapter yet, so I thought it best to remove the two scsi drives from the volume group before moving the 2 IDEs to the new box. Here's what I did: pvmove /dev/sda1 Well, pvmove gave me an error message (I can not remember the exact message) and returned me to the command prompt, so I assumed nothing was done. Afterward, I ran another, non-destructive command (i think vgscan or something like that) and the process just froze. Since I was at the console in single-user mode and could not get back to the shell, I rebooted. Well, on reboot the system could not mount my /usr or /var/video (not important) because the superblock could not be found. Both partitions were logical volumes. It really sucks not having /usr as you can imagine. I've managed to get a basic /usr working that I copied from a CD onto my / partition (that's not a LVM volume). Running pvmove again, just gives me the same error as before. Running pvmove --abort freezes again. When I run ps after the pvmove --abort, I see the process status for pvmove is D