All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Bunk <bunk@fs.tum.de>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>,
	Matt Domsch <Matt_Domsch@dell.com>,
	linux-scsi@vger.kernel.org
Subject: [2.4 patch] fix link error with both megaraid drivers
Date: Mon, 10 Nov 2003 18:44:55 +0100	[thread overview]
Message-ID: <20031110174455.GN22185@fs.tum.de> (raw)

Hi Marcelo,

the issue described below is still present in -pre9.

cu
Adrian



----- Forwarded message from Adrian Bunk <bunk@fs.tum.de> -----

Date:	Thu, 23 Oct 2003 16:07:43 +0200
From: Adrian Bunk <bunk@fs.tum.de>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>,
	Matt Domsch <Matt_Domsch@dell.com>, linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [patch] 2.4.23-pre8: link error with both megaraid drivers

On Wed, Oct 22, 2003 at 09:24:17PM -0200, Marcelo Tosatti wrote:
>...
> Summary of changes from v2.4.23-pre7 to v2.4.23-pre8
> ============================================
>...
> Matt Domsch:
>   o Fix megaraid2 compilation problems
>...

Trying to compile both megaraid drivers statically into the kernel still 
fails with the following link error:

<--  snip  -->

...
ld -m elf_i386  -r -o scsidrv.o scsi_mod.o sim710.o advansys.o pci2000.o 
pci2220i.o psi240i.o BusLogic.o dpt_i2o.o u14-34f.o ultrastor.o aha152x.o 
aha1542.o aha1740.o aacraid/aacraid.o aic7xxx/aic7xxx.o aic7xxx/aic79xx.o ips.o 
fd_mcs.o fdomain.o in2000.o g_NCR5380.o NCR53c406a.o NCR_D700.o 53c700.o sym53c416.o 
qlogicfas.o qlogicisp.o qlogicfc.o qla1280.o pas16.o seagate.o t128.o dmx3191d.o 
dtc.o 53c7,8xx.o sym53c8xx_2/sym53c8xx_2.o eata_dma.o eata_pio.o wd7000.o 
NCR53C9x.o mca_53c9x.o ibmmca.o eata.o tmscsim.o AM53C974.o megaraid.o megaraid2.o 
atp870u.o gdth.o initio.o a100u2w.o ide-scsi.o 3w-xxxx.o ppa.o imm.o scsi_debug.o 
cpqfc.o nsp32.o st.o osst.o sd_mod.o sr_mod.o sg.o
megaraid2.o(.text+0x1ff0): In function `megaraid_info':
: multiple definition of `megaraid_info'
megaraid.o(.text+0x29f8): first defined here
ld: Warning: size of symbol `megaraid_info' changed from 67 in 
megaraid.o to 57 in megaraid2.o
make[3]: *** [scsidrv.o] Error 1
make[3]: Leaving directory `/home/bunk/linux/kernel-2.4/linux/kernel-2.4/linux-2.4.23-pre8-full/drivers/scsi'

<--  snip  -->

The patch below fixes this issue by disalllowing the static inclusion of 
both drivers at the same time.

cu
Adrian

--- linux-2.4.23-pre7-full/drivers/scsi/Config.in.old	2003-10-11 17:00:47.000000000 +0200
+++ linux-2.4.23-pre7-full/drivers/scsi/Config.in	2003-10-11 17:24:00.000000000 +0200
@@ -67,7 +67,12 @@
 dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
 dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI $CONFIG_PCI
 dep_tristate 'AMI MegaRAID support' CONFIG_SCSI_MEGARAID $CONFIG_SCSI
-dep_tristate 'AMI MegaRAID2 support' CONFIG_SCSI_MEGARAID2 $CONFIG_SCSI
+if [ "$CONFIG_SCSI_MEGARAID" != "y" ]; then
+  define_tristate CONFIG_SCSI_MEGARAID2_DEP $CONFIG_SCSI
+else
+  define_tristate CONFIG_SCSI_MEGARAID2_DEP m $CONFIG_SCSI
+fi
+dep_tristate 'AMI MegaRAID2 support' CONFIG_SCSI_MEGARAID2 $CONFIG_SCSI_MEGARAID2_DEP
 
 dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
 if [ "$CONFIG_SCSI_BUSLOGIC" != "n" ]; then
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

----- End forwarded message -----


             reply	other threads:[~2003-11-10 17:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-11-10 17:44 Adrian Bunk [this message]
2003-11-10 18:18 ` [2.4 patch] fix link error with both megaraid drivers Marcelo Tosatti
2003-11-11 22:53   ` Adrian Bunk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20031110174455.GN22185@fs.tum.de \
    --to=bunk@fs.tum.de \
    --cc=Matt_Domsch@dell.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=marcelo.tosatti@cyclades.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.