From: Adrian Bunk <bunk@fs.tum.de>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>, linux-kernel@vger.kernel.org
Subject: Re: [2.6 patch] give SATA its' own menu
Date: Wed, 12 Nov 2003 01:05:37 +0100 [thread overview]
Message-ID: <20031112000537.GD13643@fs.tum.de> (raw)
In-Reply-To: <3FAFD81D.5080605@pobox.com>
On Mon, Nov 10, 2003 at 01:25:33PM -0500, Jeff Garzik wrote:
> Adrian Bunk wrote:
> >I don't know the internals of the SATA driver, but this is unchanged
> >from the current dependencies.
> >
> >If this is required, I can send a patch that adds disk an cdrom options
> >to SATA and select's the appropriate SCSI options.
>
>
> If you didn't mind, such a patch would be nice...
Below is a patch that gives SATA its' own menu, and additionally adds
options that select SCSI disc or cdrom support if enabled.
> Jeff
cu
Adrian
--- linux-2.6.0-test9/drivers/scsi/Kconfig.old 2003-11-12 00:45:34.000000000 +0100
+++ linux-2.6.0-test9/drivers/scsi/Kconfig 2003-11-12 01:02:11.000000000 +0100
@@ -1,3 +1,76 @@
+menu "Serial ATA (SATA) support"
+ depends on EXPERIMENTAL
+
+config SCSI_SATA
+ bool "Serial ATA (SATA) support"
+ depends on EXPERIMENTAL
+ select SCSI
+ help
+ This driver family supports Serial ATA host controllers
+ and devices.
+
+ If unsure, say N.
+
+config SCSI_SATA_DISC
+ tristate "SATA disk support"
+ depends on SCSI_SATA
+ select BLK_DEV_SD
+ help
+ This option enables support for SATA hard disks.
+
+config SCSI_SATA_CDROM
+ tristate "SATA CD-ROM support"
+ depends on SCSI_SATA
+ select BLK_DEV_SR
+ help
+ This option enables support for SATA CD-ROMs.
+
+config SCSI_SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
+config SCSI_ATA_PIIX
+ tristate "Intel PIIX/ICH SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for ICH5 Serial ATA.
+ If PATA support was enabled previously, this enables
+ support for select Intel PIIX/ICH PATA host controllers.
+
+ If unsure, say N.
+
+config SCSI_SATA_PROMISE
+ tristate "Promise SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Promise Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_SIL
+ tristate "Silicon Image SATA support"
+ depends on SCSI_SATA && PCI && BROKEN
+ help
+ This option enables support for Silicon Image Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_VIA
+ tristate "VIA SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for VIA Serial ATA.
+
+ If unsure, say N.
+
+endmenu
+
+
menu "SCSI device support"
config SCSI
@@ -403,58 +476,6 @@
To compile this driver as a module, choose M here: the
module will be called megaraid.
-config SCSI_SATA
- bool "Serial ATA (SATA) support"
- depends on SCSI && EXPERIMENTAL
- help
- This driver family supports Serial ATA host controllers
- and devices.
-
- If unsure, say N.
-
-config SCSI_SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
- help
- This option enables support for Broadcom/Serverworks/Apple K2
- SATA support.
-
- If unsure, say N.
-
-config SCSI_ATA_PIIX
- tristate "Intel PIIX/ICH SATA support"
- depends on SCSI_SATA && PCI
- help
- This option enables support for ICH5 Serial ATA.
- If PATA support was enabled previously, this enables
- support for select Intel PIIX/ICH PATA host controllers.
-
- If unsure, say N.
-
-config SCSI_SATA_PROMISE
- tristate "Promise SATA support"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
- help
- This option enables support for Promise Serial ATA.
-
- If unsure, say N.
-
-config SCSI_SATA_SIL
- tristate "Silicon Image SATA support"
- depends on SCSI_SATA && PCI && BROKEN
- help
- This option enables support for Silicon Image Serial ATA.
-
- If unsure, say N.
-
-config SCSI_SATA_VIA
- tristate "VIA SATA support"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
- help
- This option enables support for VIA Serial ATA.
-
- If unsure, say N.
-
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA) && SCSI
prev parent reply other threads:[~2003-11-12 0:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-26 0:15 [2.6 patch] give SATA its' own menu Adrian Bunk
2003-10-26 1:11 ` Petr Vandrovec
2003-10-27 8:30 ` Holger Schurig
2003-11-10 17:58 ` Adrian Bunk
2003-11-10 18:25 ` Jeff Garzik
2003-11-12 0:05 ` Adrian Bunk [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031112000537.GD13643@fs.tum.de \
--to=bunk@fs.tum.de \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=vandrove@vc.cvut.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.