From: Adam Belay <ambx1@neo.rr.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PnP Fixes for 2.6.0-test9
Date: Sun, 16 Nov 2003 00:27:18 +0000 [thread overview]
Message-ID: <20031116002718.GD13220@neo.rr.com> (raw)
In-Reply-To: <20031116002620.GB13220@neo.rr.com>
# --------------------------------------------
# 03/11/15 ambx1@neo.rr.com 1.1449
# [PnPBIOS] make /proc interface an optional feature
#
# The PnPBIOS /proc interface provides direct access to PnPBIOS calls.
# These calls can be potentially dangerous, especially on buggy systems.
# Therefore, this patch provides an option for PnPBIOS calls to be
# managed by the PnPBIOS driver exclusively. This patch also updates
# the KConfig documentation accordingly.
# --------------------------------------------
#
diff -Nru a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig
--- a/drivers/pnp/Kconfig Sun Nov 16 00:25:01 2003
+++ b/drivers/pnp/Kconfig Sun Nov 16 00:25:01 2003
@@ -30,33 +30,9 @@
comment "Protocols"
depends on PNP
-config ISAPNP
- bool "ISA Plug and Play support (EXPERIMENTAL)"
- depends on PNP && EXPERIMENTAL
- help
- Say Y here if you would like support for ISA Plug and Play devices.
- Some information is in <file:Documentation/isapnp.txt>.
+source "drivers/pnp/isapnp/Kconfig"
- If unsure, say Y.
-
-config PNPBIOS
- bool "Plug and Play BIOS support (EXPERIMENTAL)"
- depends on PNP && EXPERIMENTAL
- ---help---
- Linux uses the PNPBIOS as defined in "Plug and Play BIOS
- Specification Version 1.0A May 5, 1994" to autodetect built-in
- mainboard resources (e.g. parallel port resources).
-
- Some features (e.g. event notification, docking station information,
- ISAPNP services) are not used.
-
- Note: ACPI is expected to supersede PNPBIOS some day, currently it
- co-exists nicely.
-
- See latest pcmcia-cs (stand-alone package) for a nice "lspnp" tools,
- or have a look at /proc/bus/pnp.
-
- If unsure, say Y.
+source "drivers/pnp/pnpbios/Kconfig"
endmenu
diff -Nru a/drivers/pnp/isapnp/Kconfig b/drivers/pnp/isapnp/Kconfig
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/pnp/isapnp/Kconfig Sun Nov 16 00:25:01 2003
@@ -0,0 +1,11 @@
+#
+# ISA Plug and Play configuration
+#
+config ISAPNP
+ bool "ISA Plug and Play support (EXPERIMENTAL)"
+ depends on PNP && EXPERIMENTAL
+ help
+ Say Y here if you would like support for ISA Plug and Play devices.
+ Some information is in <file:Documentation/isapnp.txt>.
+
+ If unsure, say Y.
diff -Nru a/drivers/pnp/pnpbios/Kconfig b/drivers/pnp/pnpbios/Kconfig
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/pnp/pnpbios/Kconfig Sun Nov 16 00:25:01 2003
@@ -0,0 +1,41 @@
+#
+# Plug and Play BIOS configuration
+#
+config PNPBIOS
+ bool "Plug and Play BIOS support (EXPERIMENTAL)"
+ depends on PNP && EXPERIMENTAL
+ ---help---
+ Linux uses the PNPBIOS as defined in "Plug and Play BIOS
+ Specification Version 1.0A May 5, 1994" to autodetect built-in
+ mainboard resources (e.g. parallel port resources).
+
+ Some features (e.g. event notification, docking station information,
+ ISAPNP services) are not currently implemented.
+
+ If you would like the kernel to detect and allocate resources to
+ your mainboard devices (on some systems they are disabled by the
+ BIOS) say Y here. Also the PNPBIOS can help prevent resource
+ conflicts between mainboard devices and other bus devices.
+
+ Note: ACPI is expected to supersede PNPBIOS some day, currently it
+ co-exists nicely. If you have a non-ISA system that supports ACPI,
+ you probably don't need PNPBIOS support.
+
+config PNPBIOS_PROC_FS
+ bool "Plug and Play BIOS /proc interface"
+ depends on PNPBIOS && PROC_FS
+ ---help---
+ If you say Y here and to "/proc file system support", you will be
+ able to directly access the PNPBIOS. This includes resource
+ allocation, ESCD, and other PNPBIOS services. Using this
+ interface is potentially dangerous because the PNPBIOS driver will
+ not be notified of any resource changes made by writting directly.
+ Also some buggy systems will fault when accessing certain features
+ in the PNPBIOS /proc interface (e.g. ESCD).
+
+ See the latest pcmcia-cs (stand-alone package) for a nice set of
+ PNPBIOS /proc interface tools (lspnp and setpnp).
+
+ Unless you are debugging or have other specific reasons, it is
+ recommended that you say N here.
+
diff -Nru a/drivers/pnp/pnpbios/Makefile b/drivers/pnp/pnpbios/Makefile
--- a/drivers/pnp/pnpbios/Makefile Sun Nov 16 00:25:01 2003
+++ b/drivers/pnp/pnpbios/Makefile Sun Nov 16 00:25:01 2003
@@ -2,6 +2,6 @@
# Makefile for the kernel PNPBIOS driver.
#
-pnpbios-proc-$(CONFIG_PROC_FS) = proc.o
+pnpbios-proc-$(CONFIG_PNPBIOS_PROC_FS) = proc.o
obj-y := core.o bioscalls.o rsparser.o $(pnpbios-proc-y)
diff -Nru a/drivers/pnp/pnpbios/pnpbios.h b/drivers/pnp/pnpbios/pnpbios.h
--- a/drivers/pnp/pnpbios/pnpbios.h Sun Nov 16 00:25:01 2003
+++ b/drivers/pnp/pnpbios/pnpbios.h Sun Nov 16 00:25:01 2003
@@ -36,7 +36,7 @@
extern void pnpbios_print_status(const char * module, u16 status);
extern void pnpbios_calls_init(union pnp_bios_install_struct * header);
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PNPBIOS_PROC_FS
extern int pnpbios_interface_attach_device(struct pnp_bios_node * node);
extern int pnpbios_proc_init (void);
extern void pnpbios_proc_exit (void);
@@ -44,4 +44,4 @@
static inline int pnpbios_interface_attach_device(struct pnp_bios_node * node) { return 0; }
static inline int pnpbios_proc_init (void) { return 0; }
static inline void pnpbios_proc_exit (void) { ; }
-#endif /* CONFIG_PROC */
+#endif /* CONFIG_PNPBIOS_PROC_FS */
next prev parent reply other threads:[~2003-11-16 5:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-16 0:26 [PATCH] PnP Fixes for 2.6.0-test9 Adam Belay
2003-11-16 0:26 ` Adam Belay
2003-11-16 0:27 ` Adam Belay [this message]
2003-11-16 0:27 ` Adam Belay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031116002718.GD13220@neo.rr.com \
--to=ambx1@neo.rr.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.