From: maple@maple.org.ua
To: linux-kernel@vger.kernel.org
Cc: maple@center.hqhost.net
Subject: test10, hangs at aic79xx probing
Date: Mon, 24 Nov 2003 12:08:26 +0200 [thread overview]
Message-ID: <20031124100826.GA10304@valinor.localnet> (raw)
Hello!
machine hangs just after
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
next should be
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.4
<Adaptec 29320LP Ultra320 SCSI adapter>
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
(scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E
Type: Direct-Access ANSI SCSI revision: 03
no oops, no panic
I've also experienced troubles with this scsi controller in test9,
kernel detected it normally, but
after reading from both disks simultaneously kernel printing huge amount
of debug and refused to read with io error. exact info I sent to linux-scsi,
if interested.
in test9 case, Justin Gibbs (gibbs@scsiguy.com) suggested me to try
drivers from
http://people.FreeBSD.org/~gibbs/linux/SRC/aic79xx-linux-2.6-20031106-tar.gz
and it helps. Untarring these drivers into test10 does not help, same
hang after IDE partitions probing. 2.4.22 works ok. Tell me, if you
need more info.
SY, Vladimir
next reply other threads:[~2003-11-24 10:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 10:08 maple [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-11-24 13:11 test10, hangs at aic79xx probing Birger Tödtmann
2003-11-24 14:42 ` Greg Berenfield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031124100826.GA10304@valinor.localnet \
--to=maple@maple.org.ua \
--cc=linux-kernel@vger.kernel.org \
--cc=maple@center.hqhost.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.