From: Jimmie Mayfield <mayfield+kernel@sackheads.org>
To: linux-kernel@vger.kernel.org
Subject: 2.4.23 : timeouts and lost interrupts using IDE-SCSI
Date: Wed, 3 Dec 2003 11:41:46 -0500 [thread overview]
Message-ID: <20031203164146.GA81344@sackheads.org> (raw)
Since upgrading from 2.4.20 to 2.4.23, I can no longer mount my ATAPI CDROM and
CDR/W drives using IDE-SCSI. Attempts to mount those drives result in
lost interrupts messages:
Dec 3 08:21:10 kaon kernel: scsi : aborting command due to timeout : pid 2114, scs
i2, channel 0, id 0, lun 0 Read (10) 00 00 00 00 10 00 00 01 00
Dec 3 08:21:10 kaon kernel: hdc: DMA interrupt recovery
Dec 3 08:21:10 kaon kernel: hdc: lost interrupt
Kernel is able to successfully probe for and identify these devices, however:
Dec 3 08:20:40 kaon kernel: hdc: attached ide-scsi driver.
Dec 3 08:20:41 kaon kernel: hdd: attached ide-scsi driver.
Dec 3 08:20:41 kaon kernel: scsi2 : SCSI host adapter emulation for IDE ATAPI devi
ces
Dec 3 08:20:41 kaon kernel: Vendor: HITACHI Model: CDR-8430 Rev: 0024
Dec 3 08:20:41 kaon kernel: Type: CD-ROM ANSI SCSI
revision: 02
Dec 3 08:20:41 kaon kernel: Vendor: Model: CD-R/RW RW7060A Rev: 1.50
Dec 3 08:20:41 kaon kernel: Type: CD-ROM ANSI SCSI
revision: 02
Dec 3 08:20:41 kaon kernel: Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lu
n 0
Dec 3 08:20:41 kaon kernel: Attached scsi CD-ROM sr1 at scsi2, channel 0, id 1, lu
n 0
Dec 3 08:20:41 kaon kernel: sr0: scsi3-mmc drive: 14x/32x cd/rw xa/form2 cdda tray
Dec 3 08:20:41 kaon kernel: Uniform CD-ROM driver Revision: 3.12
Dec 3 08:20:41 kaon kernel: sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cd
da tray
I can revert back to 2.4.20 and the drives are mountable once again so I do not
believe it's a hardware failure. Similarly, I can build 2.4.23 with IDE CDROM
support instead of relying on SCSI emulation and things work (though I suspect
not having SCSI emulation enabled will cause problems when burning CDs).
System specs:
IBM Intellistation MPro
SMP P2-400 (2 CPUs)
440BX chipset
ACPI automatically disabled "because your bios is from 98 and too old"
CDROM as hdc, CDR/W as hdd
both these devices are attached to the onboard PIIX4 controller
kernels compiled with gcc 2.95.3
Jimmie
--
Jimmie Mayfield
http://www.sackheads.org/mayfield email: mayfield+kernel@sackheads.org
My mail provider does not welcome UCE -- http://www.sackheads.org/uce
next reply other threads:[~2003-12-03 16:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-03 16:41 Jimmie Mayfield [this message]
[not found] <YImw.6Dc.5@gated-at.bofh.it>
2003-12-04 16:09 ` 2.4.23 : timeouts and lost interrupts using IDE-SCSI Kristian Peters
2003-12-05 23:33 ` Daniel B.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031203164146.GA81344@sackheads.org \
--to=mayfield+kernel@sackheads.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.