From: Matt Domsch <Matt_Domsch@dell.com>
To: Gonzalo Coello <gonzalocoello@hotmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Not able to load megaraid module after kernel upgrade from 2.4.9-e2 to 2.4.9-e25
Date: Thu, 18 Dec 2003 11:28:41 -0600 [thread overview]
Message-ID: <20031218112841.A4402@lists.us.dell.com> (raw)
In-Reply-To: <BAY2-F77LwSQcBqfrft00040881@hotmail.com>; from gonzalocoello@hotmail.com on Thu, Dec 18, 2003 at 04:54:41PM +0000
> Hello I am running dell Power Edge 12600, with Firmware 1.68,
> I have a Perc 4/Si RAID Controller BIOS version 1.04 FW 2.27 (the last
> version)
> When starting up, the bios can recognize the disk array with no problem, the
> server starts booting OK, but when it gets to load the megaraid module, it
> brakes:
The Linux-PowerEdge@dell.com list may be more appropriate for this
type of question. Subscribe at http://lists.us.dell.com/.
For the Red Hat kernel you mention, you want /etc/modules to list the
megaraid_2002 driver, not plain megaraid. Then remake your initial
ramdisk such that the megaraid_2002 driver gets picked up and used at
next boot.
Thanks,
Matt
--
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
next prev parent reply other threads:[~2003-12-18 17:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-18 16:54 Not able to load megaraid module after kernel upgrade from 2.4.9-e2 to 2.4.9-e25 Gonzalo Coello
2003-12-18 17:28 ` Matt Domsch [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-12-18 17:08 Mukker, Atul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031218112841.A4402@lists.us.dell.com \
--to=matt_domsch@dell.com \
--cc=gonzalocoello@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.