From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jan Fengler Subject: fsck.reiser4 Date: Sun, 21 Dec 2003 22:03:52 +0100 Sender: janfengler@web.de Message-ID: <200312212203.52775.janfengler@web.de> Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_4qg5/AE2uw+ih9v" Return-path: list-help: list-unsubscribe: list-post: Errors-To: flx@namesys.com List-Id: To: reiserfs-list@namesys.com --Boundary-00=_4qg5/AE2uw+ih9v Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hello, I have some trouble checking my reiser4 partition. I use fsck.reiser4 versi= on=20 0.4.19 and libaal version 0.4.14 on linux-2.6.0-test11. I've attached the=20 logfile and the output from dmesg. I dont know if it is a bug in fsck.reiser4, but if there is really an error= on=20 my partition (everything works well 'til now), i think it should be possibl= e=20 to correct it via fsck. I've already tried to use the newest bitkeeper-sources of=20 libaal/reiserfs4progs, but the reiserfs4progs won't compile. Thanks in advance for your attention! =A0=A0=A0=A0=A0=A0=A0=A0Jan Fengler --Boundary-00=_4qg5/AE2uw+ih9v Content-Type: text/plain; charset="us-ascii"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" . psargs-0352: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND search_node dff2d0e8 start_node dff2d0e8 return_node 00000000 psparse-1120: *** Error: Method execution failed [\_SB_.PCI0.ISA_.SIO_.COM2._STA] (Node dff2d0e8), AE_NOT_FOUND . psargs-0352: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND search_node dff2c368 start_node dff2c368 return_node 00000000 psparse-1120: *** Error: Method execution failed [\_SB_.PCI0.ISA_.SIO_.LPT_._STA] (Node dff2c368), AE_NOT_FOUND ... 27 Devices found containing: 27 _STA, 0 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) psargs-0352: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND search_node dff2d9e8 start_node dff2d9e8 return_node 00000000 psparse-1120: *** Error: Method execution failed [\_SB_.PCI0.ISA_.SIO_.COM1._STA] (Node dff2d9e8), AE_NOT_FOUND psargs-0352: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND search_node dff2d0e8 start_node dff2d0e8 return_node 00000000 psparse-1120: *** Error: Method execution failed [\_SB_.PCI0.ISA_.SIO_.COM2._STA] (Node dff2d0e8), AE_NOT_FOUND psargs-0352: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND search_node dff2c368 start_node dff2c368 return_node 00000000 psparse-1120: *** Error: Method execution failed [\_SB_.PCI0.ISA_.SIO_.LPT_._STA] (Node dff2c368), AE_NOT_FOUND Linux Plug and Play Support v0.97 (c) Adam Belay pnp: the driver 'system' has been registered PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f74d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9ec0, dseg 0x400 pnp: match found with the PnP device '00:00' and the driver 'system' pnp: match found with the PnP device '00:09' and the driver 'system' pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved pnp: match found with the PnP device '00:0a' and the driver 'system' pnp: match found with the PnP device '00:0b' and the driver 'system' pnp: match found with the PnP device '00:0d' and the driver 'system' spurious 8259A interrupt: IRQ7. PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xe0000000, mapped to 0xe0808000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=84 vesafb: protected mode interface info at c000:5570 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.13 Starting balanced_irq ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Loading Reiser4. See www.namesys.com for a description of Reiser4. udf: registering filesystem SGI XFS for Linux with ACLs, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API BIOS failed to enable PCI standards compliance, fixing this error. I/O APIC: AMD Errata #22 may be present. In the event of instability try : booting with the "noapic" option. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Real Time Clock Driver v1.12 ipmi: message handler initialized ipmi: device interface at char major 254 ipmi_kcs: No KCS @ port 0x0ca2 ipmi_kcs: Unable to find any KCS interfaces IPMI watchdog by Corey Minyard (minyard@mvista.com) Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:10' and the driver 'serial' pnp: match found with the PnP device '00:11' and the driver 'serial' pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:0e' and the driver 'parport_pc' parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: cpp_mux: aa55f00f52ad51(8f) parport0: cpp_daisy: aa5500ff(08) parport0: assign_addrs: aa5500ff(08) parport0: cpp_daisy: aa5500ff(08) parport0: assign_addrs: aa5500ff(08) lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xe1867000, 00:e0:7d:c8:97:cd, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7411: IDE controller at PCI slot 0000:00:07.1 AMD7411: chipset revision 1 AMD7411: not 100% native mode: will probe irqs later AMD7411: 0000:00:07.1 (rev 01) UDMA100 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive hdb: Hewlett-Packard CD-Writer Plus 7500, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20271: IDE controller at PCI slot 0000:00:09.0 PDC20271: chipset revision 2 PDC20271: 100% native mode on irq 9 ide2: BM-DMA at 0x1830-0x1837, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x1838-0x183f, BIOS settings: hdg:pio, hdh:pio hde: IC35L040AVVA07-0, ATA DISK drive ide2 at 0x1858-0x185f,0x1852 on irq 9 hdg: IC35L040AVVA07-0, ATA DISK drive ide3 at 0x1848-0x184f,0x1846 on irq 9 hde: max request size: 128KiB hde: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 hdg: max request size: 128KiB hdg: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host2/bus1/target0/lun0: p1 p2 p3 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITEON Model: DVD-ROM LTD163D Rev: GHR3 Type: CD-ROM ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: CD-Writer+ 7500 Rev: 1.0a Type: CD-ROM ANSI SCSI revision: 02 scsi2 : SCSI host adapter emulation for IDE ATAPI devices Vendor: E-IDE Model: CD-ROM 56X/AKH Rev: A8E Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 sr2: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr2 at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 5 Console: switching to colour frame buffer device 128x48 ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64 ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:07.4: OHCI Host Controller ohci_hcd 0000:00:07.4: USB HC TakeOver from BIOS/SMM ohci_hcd 0000:00:07.4: reset, control = 0x683 ohci_hcd 0000:00:07.4: irq 11, pci mem c00dc000 ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:07.4: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.0-test11 ohci_hcd usb usb1: SerialNumber: 0000:00:07.4 drivers/usb/core/usb.c: usb_hotplug usb usb1: registering 1-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: ganged power switching hub 1-0:1.0: global over-current protection hub 1-0:1.0: Port indicators are not supported hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: hub controller current requirement: 0mA hub 1-0:1.0: local power source is good hub 1-0:1.0: no over-current condition exists hub 1-0:1.0: enabling power on all ports ohci_hcd 0000:00:07.4: created debug files ohci_hcd 0000:00:07.4: OHCI controller state ohci_hcd 0000:00:07.4: OHCI 1.0, with legacy support registers ohci_hcd 0000:00:07.4: control 0x68f RWE RWC HCFS=operational IE PLE CBSR=3 ohci_hcd 0000:00:07.4: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:07.4: intrstatus 0x00000004 SF ohci_hcd 0000:00:07.4: intrenable 0x80000002 MIE WDH ohci_hcd 0000:00:07.4: hcca frame #0020 ohci_hcd 0000:00:07.4: roothub.a 01000204 POTPGT=1 NPS NDP=4 ohci_hcd 0000:00:07.4: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:07.4: roothub.status 00000000 ohci_hcd 0000:00:07.4: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:07.4: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:07.4: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:07.4: roothub.portstatus [3] 0x00000100 PPS Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice gameport: pci0000:00:0c.1 speed 1217 kHz input: PS2++ Logitech Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 30 i2o: Checking for PCI I2O controllers... I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... i2o_scsi.c: Version 0.1.2 chain_pool: 0 bytes @ dfc13d20 (512 byte buffers X 4 can_queue X 0 i2o controllers) md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 2232.000 MB/sec 8regs_prefetch: 2292.000 MB/sec 32regs : 1772.000 MB/sec 32regs_prefetch: 1600.000 MB/sec pIII_sse : 4436.000 MB/sec pII_mmx : 4440.000 MB/sec p5_mmx : 5940.000 MB/sec raid5: using function: pIII_sse (4436.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 1.0.6-ioctl (2002-10-15) initialised: dm@uk.sistina.com Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: #0: Sound Blaster Live! (rev.7) at 0x1800, irq 5 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. sh-2021: reiserfs_fill_super: can not find reiserfs on hdg2 loading reiser4 bitmap......done (1448 jiffies) VFS: Mounted root (reiser4 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 224k freed Adding 987988k swap on /dev/hde2. Priority:-1 extents:1 Adding 977216k swap on /dev/hdg1. Priority:-2 extents:1 sym0: <810a> rev 0x12 at pci 0000:00:0b.0 irq 11 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: SCSI BUS has been reset. scsi3 : sym-2.1.18b Linux video capture interface: v1.00 bttv: driver version 0.9.12 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 9, latency: 132, mmio: 0xd0401000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom: model=44004, tuner=Temic 4006FH5 (14), radio=no bttv0: using tuner=14 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z tuner: chip found @ 0xc2 tuner: type set to 14 (Temic PAL_BG (4006FH5)) registering 0-0061 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok input: Gravis Blackhawk Digital on pci0000:00:0c.1/gameport0 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AMD 760MP chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xd4000000 [drm] Initialized radeon 1.9.0 20020828 on minor 0 registering 1-002c registering 1-0049 registering 1-0048 registering 1-002d w83781d 1-002d: Subclient 0 registration at address 0x49 failed. tuner: type already set (14) registering 0-0050 registering 1-0050 registering 1-0054 XFS mounting filesystem hde3 Starting XFS recovery on filesystem: hde3 (dev: hde3) Ending XFS recovery on filesystem: hde3 (dev: hde3) eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x1000000 mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x1000000 bttv0: skipped frame. no signal? high irq latency? reiser4[rm(7384)]: delete_inode_common (fs/reiser4/plugin/object.c:1008)[vs-1434]: WARNING: nrpages 1 mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x1000000 spurious 8259A interrupt: IRQ15. mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x1000000 --Boundary-00=_4qg5/AE2uw+ih9v Content-Type: text/plain; charset="us-ascii"; name="fsck.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="fsck.txt" Error: Directory [10f72:526f6c6c656e73:11017], plugin [dir40], node [498172], item [0], unit [8]: entry has wrong offset [11017:0(NAME):14c6562656e736c:61756620766f6e20:bbdfc5d78a9263d9]. Should be []. Removed. Error: Node (498172), item (8): item registering failed--it belongs to another object already. Plugin (dir40). --Boundary-00=_4qg5/AE2uw+ih9v--