From: Willy Gardiol <willy@gardiol.org>
To: Nicklas Bondesson <nicke@nicke.nu>,
'Mark Hahn' <hahn@physics.mcmaster.ca>
Cc: linux-ide@vger.kernel.org
Subject: Re: IDE-RAID Drive Performance
Date: Wed, 31 Dec 2003 10:28:22 +0100 [thread overview]
Message-ID: <200312311028.36222.willy@gardiol.org> (raw)
In-Reply-To: <S265929AbTL3X0Z/20031230232625Z+4252@vger.kernel.org>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Now it sounds good!
If you are trying a raid0 please send bonnie's results for it... i am
interested!
bye
Alle Wednesday 31 December 2003 00:26, Nicklas Bondesson ha scritto:
> It was the PCI latency value that was wrong. It was set to 0 in the BIOS so
> I have changed it now to 64. I now get the following figures! :)
>
> hdparm:
>
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 1.12 seconds =114.29 MB/sec
> Timing buffered disk reads: 64 MB in 1.53 seconds = 41.83 MB/sec
>
> bonnie:
>
> Version 1.02b ------Sequential Output------ --Sequential Input-
> --Random-
> -Per Chr- --Block-- -Rewrite- -Per Chr- --Block--
> --Seeks--
> Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec
> %CP
> gollum 800M 4681 98 37827 76 17590 30 4888 95 39400 26 310.4
> 3
> ------Sequential Create------ --------Random
> Create--------
> -Create-- --Read--- -Delete-- -Create-- --Read---
> -Delete--
> files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec
> %CP
> 16 310 99 +++++ +++ 21319 100 329 99 +++++ +++ 1766
> 96
> gollum,800M,4681,98,37827,76,17590,30,4888,95,39400,26,310.4,3,16,310,99,++
>+ ++,+++,21319,100,329,99,+++++,+++,1766,96
>
> Thanks for the help!
>
> /Nicke
>
> -----Original Message-----
> From: Mark Hahn [mailto:hahn@physics.mcmaster.ca]
> Sent: den 30 december 2003 19:14
> To: Nicklas Bondesson
> Subject: Re: IDE-RAID Drive Performance
>
> > The disks are setup with hdparm at boot time:
>
> not normally necessary or desirable.
>
> > /dev/hda:
> > Timing buffer-cache reads: 128 MB in 1.13 seconds =113.27 MB/sec
> > Timing buffered disk reads: 64 MB in 2.46 seconds = 26.02 MB/sec
>
> the 113 indicates that you're running on a fairly old/slow host.
> as such, you cannot expect to achive the full disk bandwidth, though you
> can probably do better than this by tweaking w/blockdev.
> it's also worth checking your bios settings (pci latency too low?)
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
- --
!
Willy Gardiol - willy@gardiol.org
www.gardiol.org
Use linux for your freedom.
"Cari fratelli dell'altra sponda
cantammo in coro giù sulla terra
amammo in cento l'identica donna
partimmo in mille per la stessa guerra.
Questo ricordo non vi consoli
quando si muore si muore soli."
(Il Testamento, Fabrizio De Andrè)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/8pbDQ9qolN/zUk4RAj8VAJ4sI1Urzrl7BVdP939M7waBcDoXGQCcCHQp
ehyNRhY/XP4kjG9l0vtBl7g=
=yGM2
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2003-12-31 9:28 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.44.0312301311530.6864-100000@coffee.psychology.mcmaster.ca>
2003-12-30 21:57 ` IDE-RAID Drive Performance Nicklas Bondesson
2003-12-30 23:26 ` Nicklas Bondesson
2003-12-31 9:28 ` Willy Gardiol [this message]
2003-12-30 21:23 Nicklas Bondesson
-- strict thread matches above, loose matches on Subject: below --
2003-12-30 15:21 Willy Gardiol
2003-12-30 16:37 ` Nicklas Bondesson
2003-12-30 19:31 ` Bartlomiej Zolnierkiewicz
2003-12-30 13:18 uaca
2003-12-30 11:12 Willy Gardiol
2003-12-30 15:04 ` Nicklas Bondesson
2003-12-30 10:44 Nicklas Bondesson
2003-12-30 11:21 ` Nuno Alexandre
2004-01-02 8:19 ` Bob
2004-01-03 14:00 ` Andre Tomt
2004-01-03 15:58 ` Nicklas Bondesson
2004-01-03 15:58 ` Nicklas Bondesson
2004-01-03 15:58 ` Nicklas Bondesson
2003-12-30 10:41 Nicklas Bondesson
2003-12-30 10:57 ` Willy Gardiol
2003-12-30 11:03 ` Nicklas Bondesson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200312311028.36222.willy@gardiol.org \
--to=willy@gardiol.org \
--cc=hahn@physics.mcmaster.ca \
--cc=linux-ide@vger.kernel.org \
--cc=nicke@nicke.nu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.