From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gordan Bobic Date: Mon, 05 Jan 2004 11:17:40 +0000 Subject: Re: [LARTC] Multihomed Masquerading, routing and iptables Message-Id: <200401051117.40800.lartc@bobich.net> List-Id: References: <200312311649.36278.lartc@bobich.net> In-Reply-To: <200312311649.36278.lartc@bobich.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 05 Jan 2004 02:55, Rio Martin wrote: > Bobic having the problem similar to what i got with one of my server > running kernel-2.4.20. All the interface i have are under the same brand > (Realtek), eth0 would be for clients, eth1 for DSLCable, eth2 for Wireless > 2.4Ghz. Weirdly, several of my clients set up correctly to use both eth1 > and eth2, but there are many clients having the wrong route packets just as > Bobic. > > This problem can be solved if i change to use SNAT instead of MASQUERADE. > Try it Bobic. Hmm. Just replace -j MASQUERADE with -j SNAT? Will that not break other things? > This Masquerade problem didnt appeared under my Linux 2.4.21 So, it is a 2.4.20 kernel problem? I was hoping to avoid home-brewing a kernel again like I did back with my old setup (RH 7.0, 2.2 kernel), and stick with a standard release kernel. Thanks. Gordan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/