From: Stephan von Krawczynski <skraw@ithnet.com>
To: Andreas Haumer <andreas@xss.co.at>
Cc: marcelo.tosatti@cyclades.com, andrew@walrond.org,
luming.yu@intel.com, linux-kernel@vger.kernel.org
Subject: Re: ACPI: problem on ASUS PR-DLS533
Date: Fri, 16 Jan 2004 14:22:51 +0100 [thread overview]
Message-ID: <20040116142251.693bc8bb.skraw@ithnet.com> (raw)
In-Reply-To: <4007E3C1.1020100@xss.co.at>
> For the system I noticed the ACPI problems (Asus PR-DLS533),
> the regression occured after 2.4.21
>
> With pristine 2.4.21 the system could boot with ACPI enabled,
> but with the new ACPI patches introduced with the 2.4.21-ac
> series (and integrated in the 2.4.x series later on) it did not.
>
> Does your board have several PCI busses (lspci -v) ?
You asked ;-)
The last two entries are the controllers in question.
00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
Flags: fast devsel
00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Flags: bus master, medium devsel, latency 32
00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Flags: medium devsel
00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Flags: medium devsel
00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at ef000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d800 [size=64]
Memory at ee800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at ee000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=64]
Memory at ed800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
00:04.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd RV200 QW [Radeon 7500 PCI Dual Display]
Flags: bus master, stepping, medium devsel, latency 32, IRQ 25
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d000 [size=256]
Memory at ed000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
00:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs SBLive! Player 5.1
Flags: bus master, medium devsel, latency 32, IRQ 26
I/O ports at b800 [size=32]
Capabilities: [dc] Power Management version 1
00:05.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at b400 [size=8]
Capabilities: [dc] Power Management version 1
00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1234
Flags: bus master, stepping, medium devsel, latency 32, IRQ 19
Memory at ec000000 (32-bit, non-prefetchable) [disabled] [size=16M]
I/O ports at b000 [disabled] [size=256]
Memory at eb800000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at effc0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Flags: bus master, medium devsel, latency 32
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a [Master SecP PriP])
Subsystem: ServerWorks CSB5 IDE Controller
Flags: bus master, medium devsel, latency 64
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 9400 [size=16]
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 Host bridge: ServerWorks GCLE Host Bridge
Subsystem: ServerWorks: Unknown device 0230
Flags: bus master, medium devsel, latency 0
01:02.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at 9000 [size=16]
Memory at ea800000 (32-bit, non-prefetchable) [size=16]
Memory at ea000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 1
01:03.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 01)
Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN
Flags: medium devsel, IRQ 20
Memory at e9800000 (32-bit, non-prefetchable) [size=32]
I/O ports at 8800 [size=32]
Capabilities: [40] Power Management version 2
01:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
Subsystem: 3Com Corporation 3C996B-T 1000Base-T
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 21
Memory at e9000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
Subsystem: 3Com Corporation 3C996B-T 1000Base-T
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 24
Memory at e8800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
02:03.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Adaptec AIC-7899P U160/m
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 22
BIST result: 00
I/O ports at 7800 [disabled] [size=256]
Memory at e8000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at efde0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
02:03.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Adaptec AIC-7899P U160/m
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 23
BIST result: 00
I/O ports at 7400 [disabled] [size=256]
Memory at e7800000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at efdc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
next prev parent reply other threads:[~2004-01-16 13:23 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-12 5:14 ACPI: problem on ASUS PR-DLS533 Yu, Luming
2004-01-15 18:14 ` Andrew Walrond
2004-01-16 10:30 ` Marcelo Tosatti
2004-01-16 11:25 ` Stephan von Krawczynski
2004-01-16 13:14 ` Andreas Haumer
2004-01-16 13:22 ` Stephan von Krawczynski [this message]
2004-01-16 12:07 ` Andrew Walrond
[not found] <BF1FE1855350A0479097B3A0D2A80EE0020ADE84@hdsmsx402.hd.intel.com>
2004-01-18 18:19 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2004-01-18 4:23 Yu, Luming
2004-01-18 11:42 ` Andreas Haumer
2004-01-18 16:01 ` Andrew Walrond
2004-01-18 17:00 ` Stephan von Krawczynski
2004-01-18 4:18 Yu, Luming
2004-01-18 9:01 ` Andrew Walrond
2004-01-07 10:50 Yu, Luming
2004-01-07 12:35 ` Stephan von Krawczynski
2004-01-07 22:58 ` Marcelo Tosatti
2003-12-23 12:04 Andreas Haumer
2003-12-23 12:04 ` Andreas Haumer
2003-12-23 14:48 ` Andrew Walrond
2003-12-23 15:21 ` Andreas Haumer
2004-01-07 10:37 ` Stephan von Krawczynski
2004-01-07 14:30 ` Andrew Walrond
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040116142251.693bc8bb.skraw@ithnet.com \
--to=skraw@ithnet.com \
--cc=andreas@xss.co.at \
--cc=andrew@walrond.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luming.yu@intel.com \
--cc=marcelo.tosatti@cyclades.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.