From: Roger Larsson <roger.larsson@norran.net>
To: linux-kernel@vger.kernel.org
Subject: Re: [OT] Crazy idea: Design open-source graphics chip - DONE
Date: Fri, 30 Jan 2004 21:53:53 +0100 [thread overview]
Message-ID: <200401302153.54075.roger.larsson@norran.net> (raw)
Not so crazy - it is already done :-)
http://www.opencores.org/projects/vga_lcd/
FEATURES
CRT and LCD display support
24bit Standard VGA interface
Separate VSYNC/HSYNC and combined CSYNC synchronization signals
Composite BLANK signal
TripleDisplay support
12bit Interface
Compatible with DVI transmitters and 12bit VGA ADCs
4 different output modes
Can be used simultaneous with the 24bit interface
User programmable video resolutions
User programmable video timing
User programmable video control signals polarization levels
32bpp, 24bpp and 16bpp color modes
8bit gray-scale and 8bit pseudo-color modes
Supports video- and/or color-lookup-table bankswitching during vertical
retrace
32bit WISHBONE revB.3 compliant slave and master interfaces
Operates from a wide range of input clock frequencies
Static synchronous design
Fully synthesizeable
STATUS
VGA/LCD core v2.0 is ready and available in verilog from OpenCores CVS via
cvsweb or via cvsget.
Low level abstraction layer available in C from CVS.
Character simulation software is currently under development.
But to get a board that gives you anything more than a cheap old VGA board
the XServer should be running on the board! (PowerPCs are good for embedding)
But for some applications you might need to talk directly to the frame
buffer...
/RogerL
--
Roger Larsson
Skellefteå
Sweden
reply other threads:[~2004-01-30 20:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200401302153.54075.roger.larsson@norran.net \
--to=roger.larsson@norran.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.