From mboxrd@z Thu Jan 1 00:00:00 1970 From: Reiner Miericke Subject: An unexpected IO-APIC was found Date: Sun, 1 Feb 2004 10:58:04 +0100 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200402011058.04240.reiner@schildi.xnc.com> Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_s2MHALZy+oww8il" Return-path: List-Id: To: linux-smp@vger.kernel.org --Boundary-00=_s2MHALZy+oww8il Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Regards Reiner Miericke --Boundary-00=_s2MHALZy+oww8il Content-Type: text/plain; charset="us-ascii"; name="boot.messages" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="boot.messages" OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #4 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 4 Building zonelist for node : 0 Kernel command line: root=/dev/sda5 vga=0x317 hda=ide-scsi hdalun=0 acpi=off desktop splash=silent ide_setup: hda=ide-scsi ide_setup: hdalun=0 bootsplash: silent mode. Initializing CPU#0 Detected 2405.863 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 4751.36 BogoMIPS Memory: 1023276k/1048512k available (1874k kernel code, 16528k reserved, 638k data, 188k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 per-CPU timeslice cutoff: 1463.08 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4800.51 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 2/6 eip 3000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4800.51 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 3/7 eip 3000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4800.51 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Total of 4 processors activated (19152.89 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-5, 4-9, 4-11, 4-20, 4-21 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 25. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00178020 ....... : arbitration: 00 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 00F 0F 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 00F 0F 0 0 0 0 0 1 1 51 07 00F 0F 0 0 0 0 0 1 1 59 08 00F 0F 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 00F 0F 0 0 0 0 0 1 1 69 0b 000 00 1 0 0 0 0 0 0 00 0c 00F 0F 0 0 0 0 0 1 1 71 0d 00F 0F 0 0 0 0 0 1 1 79 0e 00F 0F 0 0 0 0 0 1 1 81 0f 00F 0F 0 0 0 0 0 1 1 89 10 00F 0F 1 1 0 1 0 1 1 91 11 00F 0F 1 1 0 1 0 1 1 99 12 00F 0F 1 1 0 1 0 1 1 A1 13 00F 0F 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 00F 0F 1 1 0 1 0 1 1 B1 17 00F 0F 1 1 0 1 0 1 1 B9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2429.0057 MHz. ..... host bus clock speed is 134.0947 MHz. cpu: 0, clocks: 134947, slice: 26989 CPU0 cpu: 1, clocks: 134947, slice: 26989 cpu: 2, clocks: 134947, slice: 26989 cpu: 3, clocks: 134947, slice: 26989 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 ACPI: Subsystem revision 20030619 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xfbac0, last bus=3 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.2 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I1,P0) -> 18 PCI->APIC IRQ transform: (B3,I10,P0) -> 22 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). allocated 32 pages and 32 bhs reserved for the highmem bounces kinoded started VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 65532 aio_setup: sizeof(struct page) = 48 vesafb: framebuffer at 0xf0000000, mapped to 0xf8810000, size 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:7d20 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 22326 bytes, found (1024x768, 11098 bytes, v3). bootsplash: silent jpeg found. bootsplash: silent jpeg found. Console: switching to colour frame buffer device 118x38 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5-SATA: IDE controller at PCI slot 00:1f.2 ICH5-SATA: chipset revision 2 ICH5-SATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive hdb: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive hdc: ST3160023AS, ATA DISK drive blk: queue c047cfe8, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hdc: hdc1 hdc2 hdc3 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cryptoapi: loaded RAMDISK: Compressed image found at block 0 Freeing initrd memory: 394k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 ncr53c8xx: at PCI bus 3, device 10, function 0 ncr53c8xx: 53c895 detected ncr53c895-0: rev 0x1 on pci bus 3 device 10 function 0 irq 22 ncr53c895-0: ID 7, Fast-40, Parity Checking scsi0 : ncr53c8xx-3.4.3b-20010512 Vendor: IBM Model: DPSS-336950N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 ncr53c895-0-<1,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31) Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 SCSI device sda: 72170880 512-byte hdwr sectors (36951 MB) sda: sda1 sda2 < sda5 > sda3 Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found reiserfs: found format "3.6" with standard journal reiserfs: enabling write barrier flush mode reiserfs: using ordered data mode reiserfs: checking transaction log (device sd(8,5)) ... for (sd(8,5)) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 188k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. reiserfs: enabling write barrier flush mode lvm-mp: allocating 42 lowmem entries at c263c000 LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded reiserfs: enabling write barrier flush mode Adding Swap: 730948k swap-space (priority 42) reiserfs: enabling write barrier flush mode reiserfs: enabling write barrier flush mode NTFS driver 2.1.4a [Flags: R/O MODULE]. NTFS volume version 3.1. NTFS volume version 3.1. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. hdb: attached ide-cdrom driver. hdb: ATAPI 48X DVD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 hda: attached ide-scsi driver. scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 Intel(R) PRO/1000 Network Driver - version 5.2.16 Copyright (c) 1999-2003 Intel Corporation. PCI: Setting latency timer of device 02:01.0 to 64 eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 100 Mbps Full Duplex raw1394: /dev/raw1394 device initialized usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2 Enhanced Host Controller ehci_hcd 00:1d.7: irq 23, pci mem fa97d000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:1d.7 PCI cache line size corrected to 32. ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 8 ports detected usb-uhci.c: $Revision: 1.275 $ time 16:53:01 Dec 19 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbc00, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.3 to 64 usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 5 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 mice: PS/2 mouse device common for all mice Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray PCI: Setting latency timer of device 00:1f.5 to 64 intel8x0: clocking to 48000 IPsec Security Association Database (SADB): initialized. IPsec Security Policy Database (SPD): initialized. IPsec PF_KEY V2: initialized IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0 IPv6 over IPv4 tunneling driver parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 eth0: no IPv6 routers present isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux video capture interface: v1.00 --Boundary-00=_s2MHALZy+oww8il--