From: Grant Grundler <grundler@parisc-linux.org>
To: willy@debian.org
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] 2.6.3-rc1 sym2 hangs on a500-65
Date: Sun, 8 Feb 2004 21:34:41 -0700 [thread overview]
Message-ID: <20040209043441.GE21692@colo.lackof.org> (raw)
In-Reply-To: <20040209035621.GD21692@colo.lackof.org>
On Sun, Feb 08, 2004 at 08:56:21PM -0700, Grant Grundler wrote:
> Matthew,
> a500 (ion) hangs with /boot/vmlinux-2.6.3-rc1-pa2.
> Having problems with bus reset code path.
> I'll collect TOC info and make that available.
Here is the TOC dump. I've decoded the obvious registers.
BTW, this does not appear to be a "new" problem.
The default kernel won't boot either and hangs at about the same place:
Linux version 2.6.0-test9-4-parisc64 (jejb@raven) (gcc version 3.0.4) #2 Wed Nov 5 22:30:59 CST 2003
I say "about" becuase it hangs on the *second* time it tries to reset
the bus/host when probing SCSI ID3 on the same bus.
thanks,
grant
TOC:
GR02: 0x10118d30 cpu_idle+48
IOAQ: 0x10118d28 cpu_idle+40
*sigh* - not very helpful.
Main Menu: Enter command or menu > ser pim
PROCESSOR PIM INFORMATION
Original Product Number: A6889A
Current Product Number: A6889A
----------------- Processor 0 HPMC Information - PDC Version: 42.19 ------
Timestamp = Sun Aug 31 22:06:07 GMT 2003 (20:03:08:31:22:06:07)
HPMC Chassis Codes
Chassis Code Extension
------------ ---------
0x0000082000ff6242 0x0000000000000000
0x1800082011006312 0xcb81000000000000
0x0000087000ff6292 0x000000f0f0000000
0x6000082070006062 0x0000000000000010
0x7000082070006082 0x0000000000392400
0x7000082379006133 0xc1bff0fffed08040
0x0000080080006310 0x0000000000000001
0x000008008000631f 0x0000000000000000
General Registers 0 - 31
00-03 0000000000000000 00000000000000d4 000000001013fc8c 2d2d2d2d2d2d2d2d
04-07 202020202d2d2d2d 616821203e0a2020 5350415243212047 6d20617465206120
08-11 000000202d2d448d 0000000000000100 5f5f5f5f5f200a20 5f5f5f5f5f5f5f5f
12-15 5f5f5f5f5f5f5f5f 00000000000000fa 00000000000000f0 00000000000000ff
16-19 00000000104faa80 00000000f000022c 00000000f0002a7c 0000000000000000
20-23 000000001038ae61 000000000000000a 00000000103f8458 00000000104fb078
24-27 0000000020202000 aedef02b906416a0 00000000104fb140 202020202d2d2d2d
28-31 0000000000000109 00000000104fb130 00000000104fb140 000000001046e400
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000013e92 0000000000000000 00000000000000c0 000000000000001c
12-15 0000000000000000 0000000000000000 0000000000109000 8000000000000000
16-19 0000000b8210fabc 0000000000000000 000000001013fc94 0000000050230ec0
20-23 0000000020202020 000000002d2d448d 0000000008000000 8000000000000000
24-27 00000000003ef000 00000000004fa3c0 0000000000041020 5555555555555555
28-31 000000f0f0165670 5555555555555555 00000000104fa300 0000000010427000
Space Registers 0 - 7
00-03 00000000 00000000 00000000 104fa490
04-07 00000000 00000000 00000000 00000000
IIA Space (back entry) = 0x0000000000000000
IIA Offset (back entry) = 0x000000001013fc98
Check Type = 0x20000000
CPU State = 0x9e000004
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x0030103b
Assists Check = 0x00000000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0xfffffffffed00000
System Requestor Address = 0xfffffffffffa0000
Floating Point Registers 0 - 31
00-03 0413080024850e06 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 5555555555555555 5555555555555555 5555555555555555
08-11 5555555555555555 5555555555555555 5555555555555555 5555555555555555
12-15 5555555555555555 5555555555555555 5555555555555555 5555555555555555
16-19 5555555555555555 5555555555555555 5555555555555555 5555555555555555
20-23 5555555555555555 5555555555555555 0000000000000000 0000000000000000
24-27 5555555555555555 5555555555555555 5555555555555555 5555555555555555
28-31 5555555555555555 5555555555555555 5555555555555555 0000000000000002
Check Summary = 0xcb81000000000000
Available Memory = 0x0000000040000000
CPU Diagnose Register 2 = 0x0203000200802004
CPU Status Register 0 = 0x2420c20000000000
CPU Status Register 1 = 0x8080000000000000
SADD LOG = 0x500a00a0502b00b0
Read Short LOG = 0xc18040fff8000005
----------------- Processor 0 LPMC Information ------------------
Check Type = 0x00000000
IC Parity Info = 0x00000000
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x00000000
Assists Check = 0x00000000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0x0000000000000000
System Requestor Address = 0x0000000000000000
----------------- Processor 0 TOC Information -------------------
General Registers 0 - 31
00-03 0000000000000000 00000000104b6a98 0000000010118d30 0000000000000008
04-07 00000000104576a0 00000000003ba000 00000000000000f0 0000000000000000
08-11 0000000000000000 0000000000000001 000000000804000e 000000001046c5c4
12-15 00000000000000f2 00000000000000fa 00000000000000f0 00000000000000ff
16-19 00000000f0000390 00000000f000022c 00000000f0002a7c 0000000000000000
20-23 0000000000000000 0000000000000000 0000000000000073 000000004f9ec980
24-27 00000000104b73c8 0000000010424000 00000000103b89b8 00000000104576a0
28-31 000000004f9ec948 000000004f6f43f0 0000000010424280 000000000000a000
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 00000000000000c0 000000000000000c
12-15 0000000000000000 0000000000000000 000000000010b000 ff80000000000000
16-19 000002afe7374118 0000000000000000 0000000010118d24 0000000086a0201a
20-23 0000000000000000 0000000000000000 000000ff0804ff0f 8000000000000000
24-27 00000000003b9000 00000000003b9000 0000000000041020 5555555555555555
28-31 000000f0f0165670 5555555555555555 0000000010424000 0000000010428000
Space Registers 0 - 7
00-03 00000000 00000000 00000000 00000000
04-07 00000000 00000000 00000000 00000000
IIA Space (back entry) = 0x0000000000000000
IIA Offset (back entry) = 0x0000000010118d28
CPU State = 0x9e000001
-------------- Memory Error Log Information --------------
Bus 0 Log Information
Timestamp = Sun Aug 31 22:06:07 GMT 2003 (20:03:08:31:22:06:07)
OV RQ RS ESTAT A C D corr unc fe cw pf
-- -- -- ----- - - - ---- --- -- -- --
X ERR_ERROR X X
Bus Requestor Address = 0xfffffffffffa0000
Bus Target Address = 0x0000000000000000
Bus Responder Address = 0xfffffffffed00000
Error Status Reg = 0x0000000000000010
Runway Control Reg = 0x0000021c00002818
Runway Address Reg = 0xc1bff0fffed08040
Runway Data High Reg = 0xf8018a1ff820ca01
Runway Data Low Reg = 0xf8018a1ff820ca01
Memory Address Reg = 0x000001ff3fffffff
Memory Address Corr Reg = 0x000001ff3fffffff
Memory Syndrome Reg = 0x0000000000000000
Memory Syndrome Corr Reg = 0x0000000000000000
Address/Control Parity Error Registers
Address/Control Parity Error Bit (mem_addr_par_stat) Not Set
------------ I/O Module Error Log Information ------------
No I/O module errors logged
Main Menu: Enter command or menu >
prev parent reply other threads:[~2004-02-09 4:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-09 3:56 [parisc-linux] 2.6.3-rc1 sym2 hangs on a500-65 Grant Grundler
2004-02-09 4:34 ` Grant Grundler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040209043441.GE21692@colo.lackof.org \
--to=grundler@parisc-linux.org \
--cc=parisc-linux@lists.parisc-linux.org \
--cc=willy@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.