From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Tvrtko A. =?iso-8859-2?q?Ur=B9ulin?=" Subject: Re: Network interface problem Date: Wed, 11 Feb 2004 12:46:24 +0100 Sender: xen-devel-admin@lists.sourceforge.net Message-ID: <200402111246.24382.tvrtko@croadria.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Disposition: inline Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: xen-devel@lists.sourceforge.net Cc: Keir Fraser List-Id: xen-devel@lists.xenproject.org On Wednesday 11 February 2004 12:01, Keir Fraser wrote: > In fact I will need the _full_ boot-time output both from Xen and from > normal vanilla Linux 2.4.24 (not a vendor kernel!). > > Even if this weren't the case, I've quickly learned never to trust a > bug report until I've personally eyeballed it. ;-) That is a smart policy. I am sorry I tried to convince you to trust me. :) It seems that tg3 issue really isn't related to Xen. It really doesn't work under vanilla 2.4.24 with: tg3.c:v2.3 (November 5, 2003) tg3: Could not obtain valid ethernet address, aborting. While under 2.4.24-grsec it does: tg3.c:v2.3 (November 5, 2003) eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:08:02:f7:c1:fa tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. That is really strange and I will post it to LKML and grsec MLs. Complete kernel logs differ only in kernel memory usage and cpu speed calculation. So it seems that I have never tried 2.4.24 vanilla before, only thought that I did. :) ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn