From: Chip Salzenberg <chip-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: ThinkPad A30 vs. 2.6.3rc2 - ACPI errors on boot
Date: Tue, 17 Feb 2004 10:42:19 -0500 [thread overview]
Message-ID: <20040217154218.GH1696@perlsupport.com> (raw)
(I don't know if SourceForge is broken temporarily or permanently, but
I was unable to find list archives. So I can't see whether anyonee
else has reported these issues, or read any answers unless I'm copied.)
Booting with ACPI in kernel 2.6.3rc2 on a ThinkPad A30 (2652-36U)
produces these errors. Most things seem OK at runtime, except of
course that there's no working suspend, which is a killer. :-(
=====================================================================================
ACPI: RSDP (v002 IBM ) @ 0x000f7440
ACPI: XSDT (v001 IBM TP-1E 0x00001152 LTP 0x00000000) @ 0x27f6f070
ACPI: FADT (v001 IBM TP-1E 0x00001152 IBM 0x00000001) @ 0x27f6f0b4
ACPI: SSDT (v001 IBM TP-1E 0x00001152 MSFT 0x0100000d) @ 0x27f6f168
ACPI: ECDT (v001 IBM TP-1E 0x00001152 IBM 0x00000001) @ 0x27f79f87
ACPI: BOOT (v001 IBM TP-1E 0x00001152 LTP 0x00000001) @ 0x27f79fd8
ACPI: DSDT (v001 IBM TP-1E 0x00001152 MSFT 0x0100000d) @ 0x00000000
ACPI: Subsystem revision 20040116
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Found ECDT
ACPI: Could not use ECDT
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node e7ea9ce0), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node e7ea8500), AE_NOT_EXIST
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node e7ea8500), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node e7ea8380), AE_NOT_EXIST
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node e7ea8380), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLID] (Node e7ea1320), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLII] (Node e7ea1340), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLPC] (Node e7ea1380), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.IDE0.PRIM.SLAV._STA] (Node e7ea1d20), AE_NOT_EXIST
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.IDE0.PRIM.SLAV._STA] (Node e7ea1d20), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRID] (Node e7ea1f00), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRII] (Node e7ea1f20), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRPC] (Node e7ea1f60), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node e7ea1ce0), AE_NOT_EXIST
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node e7ea1ce0), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLID] (Node e7ea1320), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLII] (Node e7ea1340), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLPC] (Node e7ea1380), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node e7ea1580), AE_NOT_EXIST
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node e7ea18c0), AE_NOT_EXIST
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node e7ea18c0), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACP5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU] (supports C1 C2 C3)
ACPI: Thermal Zone [THM0] (56 C)
=====================================================================================
Here's the .config:
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set
--
Chip Salzenberg - a.k.a. - <chip-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>
"I wanted to play hopscotch with the impenetrable mystery of existence,
but he stepped in a wormhole and had to go in early." // MST3K
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
next reply other threads:[~2004-02-17 15:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-17 15:42 Chip Salzenberg [this message]
[not found] ` <20040217154218.GH1696-R2BnnNewRl46W4JZGn+SJw@public.gmane.org>
2004-02-17 15:54 ` ThinkPad A30 vs. 2.6.3rc2 - ACPI errors on boot Randy.Dunlap
2004-02-17 18:24 ` Nate Lawson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040217154218.GH1696@perlsupport.com \
--to=chip-e+axbwqsrlaavxtiumwx3w@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.