All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Coatti <cova@ferrara.linux.it>
To: <linux-kernel@vger.kernel.org>
Subject: 2.6.3-mm1 and aic7xxx
Date: Thu, 19 Feb 2004 22:34:53 +0100	[thread overview]
Message-ID: <200402192234.53855.cova@ferrara.linux.it> (raw)

I'm experiencing some problems with 2.6.3-mm1 release: on boot the system 
hangs trying to detect scsi devices, and the light on scsi cdrom flashes 
every few seconds. With 2.6.3-rc3-mm1 all works just fine, and I get this 
syslog entry:

Feb 19 22:23:15 kefk kernel: ahc_pci:3:6:0: Host Adapter Bios disabled.  Using 
default SCSI device parameters
Feb 19 22:23:15 kefk kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA 
DRIVER, Rev 6.2.36
Feb 19 22:23:15 kefk kernel:         <Adaptec 2902/04/10/15/20C/30C SCSI 
adapter>
Feb 19 22:23:15 kefk kernel:         aic7850: Single Channel A, SCSI Id=7, 
3/253 SCBs

<<<<<<<<<<<<<<<2.6.3-mm1 hangs here

Feb 19 22:23:15 kefk kernel:
Feb 19 22:23:15 kefk kernel:   Vendor: Nikon     Model: COOLSCANIII       Rev: 
1.31
Feb 19 22:23:15 kefk kernel:   Type:   Scanner                            ANSI 
SCSI revision: 02
Feb 19 22:23:15 kefk kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, 
offset 15)
Feb 19 22:23:15 kefk kernel:   Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 
1.01
Feb 19 22:23:15 kefk kernel:   Type:   CD-ROM                             ANSI 
SCSI revision: 02
Feb 19 22:23:15 kefk kernel: (scsi0:A:5): 10.000MB/s transfers (10.000MHz, 
offset 15)
Feb 19 22:23:15 kefk kernel:   Vendor: YAMAHA    Model: CRW6416S          Rev: 
1.0c
Feb 19 22:23:15 kefk kernel:   Type:   CD-ROM                             ANSI 
SCSI revision: 02

I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI 
BUS 0!" message when it probes ICH5, i.e.

Feb 19 22:23:15 kefk kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1

<<<<<<<<<<<<HERE

Feb 19 22:23:15 kefk kernel: ICH5: chipset revision 2
Feb 19 22:23:15 kefk kernel: ICH5: not 100%% native mode: will probe irqs 
later
Feb 19 22:23:15 kefk kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: 
hda:DMA, hdb:pio
Feb 19 22:23:15 kefk kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: 
hdc:pio, hdd:pio

system: PIV 2.HT/i875p (abit ic7-g), SMP kernel (SMT), 
gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)

I can provide more details if needed, and any help will be appreciated.

Thanks.

-- 
Fabio Coatti       http://www.ferrara.linux.it/members/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.

             reply	other threads:[~2004-02-19 21:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-19 21:34 Fabio Coatti [this message]
2004-02-20  0:21 ` 2.6.3-mm1 and aic7xxx Andrew Morton
2004-02-20 20:22   ` Fabio Coatti
2004-02-21  0:53   ` Fabio Coatti
  -- strict thread matches above, loose matches on Subject: below --
2004-02-21 10:47 P. Christeas
     [not found] <A6974D8E5F98D511BB910002A50A6647615F2BAD@hdsmsx402.hd.intel.com>
2004-02-23  7:28 ` Len Brown
2004-02-23  9:06   ` Fabio Coatti
2004-02-29 23:30   ` Fabio Coatti
2004-02-29 23:42     ` Andrew Morton
2004-03-01  0:37       ` Fabio Coatti
2004-02-29 23:45 Brown, Len
2004-03-01  0:39 ` Fabio Coatti
2004-03-01 23:33   ` Fabio Coatti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200402192234.53855.cova@ferrara.linux.it \
    --to=cova@ferrara.linux.it \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.