From: Lech Szychowski <lech.szychowski@pse.pl>
To: linux-kernel@vger.kernel.org
Subject: Re: bcm5700 driver at 100Mbit? tg3 doesn't do 100Mbit - 2.6.4-mm1
Date: Sun, 14 Mar 2004 14:24:56 +0100 [thread overview]
Message-ID: <20040314132456.GA14249@lech.pse.pl> (raw)
In-Reply-To: <20040314123014.GA8839@merlin.emma.line.org>
> > tg3.ko loads, network starts up. Can't connect to 100Mbit network
> > switch. The bcm5700 driver in ths SuSE kraxel 2.6.3 kernel works. The
> > tg3 is supposed to be a replacement for bcm5700 I believe.
Works for me (Dell Latitude D600), both for "NIC to switch"...
===
Mar 12 16:20:37 y kernel: Linux version 2.6.4-mm1 (lech7@y) (gcc version 3.3.3) #1 Thu Mar 11 14:16:54 CET 2004
[...]
Mar 12 16:20:37 y kernel: eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:7b:d8:9d
[...]
Mar 12 16:20:39 y kernel: tg3: eth0: Link is up at 100 Mbps, half duplex.
Mar 12 16:20:39 y kernel: tg3: eth0: Flow control is off for TX and off for RX.
===
...and "NIC to NIC" mode:
===
Mar 14 03:43:08 y kernel: Linux version 2.6.4-mm1 (lech7@y) (gcc version 3.3.3) #1 Thu Mar 11 14:16:54 CET 2004
[...]
Mar 14 03:43:08 y kernel: eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:7b:d8:9d
[...]
Mar 14 03:43:10 y kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Mar 14 03:43:10 y kernel: tg3: eth0: Flow control is off for TX and off for RX.
===
--
Leszek.
-- lech7@pse.pl 2:480/33.7 -- REAL programmers use INTEGERS --
-- speaking just for myself...
next prev parent reply other threads:[~2004-03-14 13:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-14 6:00 bcm5700 driver at 100Mbit? tg3 doesn't do 100Mbit - 2.6.4-mm1 Sid Boyce
2004-03-14 12:30 ` Matthias Andree
2004-03-14 13:24 ` Lech Szychowski [this message]
[not found] ` <Pine.LNX.4.58.0403140322430.9920@puma.cabm.rutgers.edu>
2004-03-14 15:52 ` Sid Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040314132456.GA14249@lech.pse.pl \
--to=lech.szychowski@pse.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.