All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Bulling <uek32z@phoenix.hadiko.de>
To: alsa-devel@lists.sourceforge.net
Cc: Jaroslav Kysela <perex@suse.cz>
Subject: Re: problems with Terratec Aureon Sky 5.1
Date: Mon, 15 Mar 2004 19:04:50 +0100	[thread overview]
Message-ID: <20040315180450.GA12227@phoenix.hadiko.de> (raw)
In-Reply-To: <Pine.LNX.4.58.0403141751370.3332@pnote.perex-int.cz>

On Sun, Mar 14, 2004 at 05:59:38PM +0100, Jaroslav Kysela wrote:
| [...] 
| So, you need something like:
| 
| pcm.duplicate {
| 	type plug
| 	slave.pcm "surround51"
| 	route_policy duplicate
| }
| 
| And now, 'aplay -Dduplicate' will duplicate stream to all six channels.

|| On Sun, 14 Mar 2004, Andreas Bulling wrote:
|| > Hm... I tried that but it doesn't work - still sound only out of the front speakers with
|| > xmms and the duplicate output device. Do I need anything else?
||
|| If you have volumes up, then it should work.

Well, as I reported it didn't. But I made progress in the meanwhile:
Using "copy" didn't work either but adding "slave.channels 6" to your
config results in output also from the two rear speakers. YEAH! ;)
That means I can use this smaller config instead of my old and bigger
"ttable one" for stereo sources (device duplicate in xmms)
Problem fixed: YES [X]

Nevertheless, playing real 5.1 sound still doesn't work.
I was able to get it by using 
"gmplayer dvd://1 -v -aid 128 -ao oss -channels 6"
but I would like to get it to work also with alsa.

What I tried next was using the following config and
"gmplayer dvd://1 -v -aid 128 -ao alsa9:default -channels 6"

---------------------------
pcm.!default {
    type plug
    slave ice1724_S32_LE;
}

pcm_slave.ice1724_S32_LE {
        pcm surround51;
        format S32_LE;
}
---------------------------

Also a little progress: Sound out of all 6 speakers without further
configuration. But unfortunately the channels got mixed up:
Gandalf is talking out of the left rear channel, now :(
Without "-channels 6" no more sound out of both rear speakers...

How can I check the assignment of channels and speakers and
how can I modify them?

That's the output using the "-channels 6" option:
---------------------------
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
dec_audio: Allocating 3840 bytes for input buffer.
dec_audio: Allocating 18432 + 65536 = 83968 bytes for output buffer.
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe)  48000 Hz  448,0 kbit/s
A52 flags before a52_frame: 0x37
A52 flags after a52_frame: 0x17
Using MMX optimized resampler
AUDIO: 48000 Hz, 6 ch, 16 bit (0x10), ratio: 56000->576000 (448,0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES)
Trying filter chain: vo
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale vo
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 6 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 6ch Signed 16-bit (Little-Endian)
alsa-init: requested format: 48000 Hz, 6 channels, Signed 16-bit (Little-Endian)
alsa-init: compiled for ALSA-1.0.3
alsa-init: soundcard set to default
alsa-init: pcm opend in block-mode
alsa-init: chunksize set to 1024
alsa-init: current val=11, fragcount=11
alsa-init: unable to set periods: Das Argument ist ungültig
alsa-init: got buffersize=131040
alsa9: 48000 Hz/6 channels/12 bpf/131040 bytes buffer/Signed 16 bit Little Endian
AO: [alsa9] 48000Hz 6ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: ALSA-0.9.x audio output
AO: Author: Alex Beregszaszi, Joy Winter <joy@pingfm.org>
AO: Comment: under developement
Building audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
Starting playback...
alsa-space: free space = 131040, status=141277936, prepared --
==> Found audio stream: 129
==> Found audio stream: 130
VDec: vo config request - 720 x 576 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,78:1 - prescaling to correct movie aspect.
VO Config (720x576->1024x576,flags=0,'MPlayer',0x32315659)
VO: [xv] 720x576 => 1024x576 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel@goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 70 for hw scaling
[xv] dx: 0 dy: 0 dw: 1024 dh: 614
*** [vo] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
[xv] dx: 0 dy: 0 dw: 1024 dh: 576
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 23%
*** [vo] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 22%
*** [vo] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
alsa-control: unable to find simple control 'PCM',0 0%  0%  0,0% 0 0 21%
[and so on...]
---------------------------

Thanks,
Andreas 


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click

      parent reply	other threads:[~2004-03-15 18:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-03-14 16:41 problems with Terratec Aureon Sky 5.1 Andreas Bulling
2004-03-14 16:59 ` Jaroslav Kysela
2004-03-14 17:17   ` Andreas Bulling
2004-03-14 17:21     ` Jaroslav Kysela
2004-03-14 17:33       ` Andreas Bulling
2004-03-15 18:04   ` Andreas Bulling [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040315180450.GA12227@phoenix.hadiko.de \
    --to=uek32z@phoenix.hadiko.de \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=perex@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.