All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Cox <conardcox@earthlink.net>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Connection dropped or cannot connect (Solved!!!!!!)
Date: Sun, 11 Apr 2004 11:46:47 -0400	[thread overview]
Message-ID: <200404111146.47402.conardcox@earthlink.net> (raw)
In-Reply-To: <200404111138.50546.conardcox@earthlink.net>

On Sunday 11 April 2004 11:38 am, Richard Cox wrote:
> On Saturday 10 April 2004 05:25 pm, Marcel Holtmann wrote:
> > Hi Richard,
> >
> > > " Do this adapter have the same problem? Is it CSR based?"
> > >
> > > Yes, according to the bluez hardware compatibilty list
> > > (http://www.holtmann.org/linux/bluetooth/devices.html) it says:
> > >
> > > Belkin F8T003 USB Adapter  	CSR  	1.1  	hci_usb  	working  	Nayib
> > > Kiuhan
> >
> > you are kidding ;) I actually know what's in my own list, but I wanna be
> > sure that the entry is correct. So check with "hciconfig -a".
> >
> > And "yes" means that the adapter is CSR based or that it have the same
> > problem.
> >
> > > I'll certainly try defining that macro you listed above and see what
> > > happens.
> >
> > Or you can remove these four lines:
> >
> > 	#ifndef CONFIG_BT_HCIUSB_ZERO_PACKET
> > 	#undef  URB_ZERO_PACKET
> > 	#define URB_ZERO_PACKET 0
> > 	#endif
> >
> > Regards
> >
> > Marcel
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: IBM Linux Tutorials
> > Free Linux tutorial presented by Daniel Robbins, President and CEO of
> > GenToo technologies. Learn everything from fundamentals to system
> > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
>
> Marcel,
>
> 	First, let me thank you for your patience with my questions!  Now, for the
> readers of this list, I'll let you know the secret to fixing this problem,
> at least for my setup:
>
> 	I downloaded the kernel patch from your website (patch-2.4.25-mh3.gz),
> saved by .config, did a 'make mrproper', restored the .config, rebuilt the
> kernel, rebooted and... and that fixed my problems.  I run a Gentoo system
> with a 'vanilla' 2.4.25 kernel, so the patch for the toplevel Makefile
> failed, but that didn't matter since it only affected the 'EXTRAVERSION'
> macro, which the vanilla kernel does not set.
>
> 	Since I applied that patch and rebuilt the kernel, I've been surfing the
> web, listening to streaming media on my iPaq, etc for the past hour without
> a single disconnect!  Outstanding!  Before I patched, I couldn't do
> anything like this for more than 5 minutes before I would get the error
> that required removal of the usb dongle.  Anyone experiencing this
> particular problem should try that patch out before giving up.
>
> Best Wishes
>
> Richard
>
*Sigh*

Seems I spoke too soon 8^(  As soon as I sent this, it disconnected again.  I 
should have waited a bit longer to post I suppose.  Nevertheless, for some 
reason, it went much longer without this error this time....I'll keep trying.

Richard


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

  reply	other threads:[~2004-04-11 15:46 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-04-10  1:10 [Bluez-users] Connection dropped or cannot connect Jean-Pierre Lord
2004-04-10 10:28 ` Marcel Holtmann
2004-04-16  1:17   ` Jean-Pierre Lord
2004-04-10 20:42 ` Richard Cox
2004-04-10 21:09   ` Marcel Holtmann
2004-04-10 21:15     ` Richard Cox
2004-04-10 21:25       ` Marcel Holtmann
2004-04-10 21:31         ` Richard Cox
2004-04-11 15:38         ` [Bluez-users] Connection dropped or cannot connect (Solved!!!!!!) Richard Cox
2004-04-11 15:46           ` Richard Cox [this message]
2004-04-11 16:37             ` Marcel Holtmann
2004-04-11 19:54               ` Richard Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200404111146.47402.conardcox@earthlink.net \
    --to=conardcox@earthlink.net \
    --cc=bluez-users@lists.sourceforge.net \
    --cc=rcox27@triad.rr.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.