All of lore.kernel.org
 help / color / mirror / Atom feed
From: Colin Leroy <colin@colino.net>
To: David Brownell <david-b@pacbell.net>
Cc: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net
Subject: [PATCH] Re: [linux-usb-devel] 2.6.6-rc1: cdc-acm still (differently) broken
Date: Fri, 16 Apr 2004 23:48:13 +0200	[thread overview]
Message-ID: <20040416234813.0aaa44cf@jack.colino.net> (raw)
In-Reply-To: <4080297A.1090002@pacbell.net>

[-- Attachment #1: Type: text/plain, Size: 686 bytes --]

On 16 Apr 2004 at 11h04, David Brownell wrote:

Hi, 

> It's looking better, but what I'd rather see is code scanning the
> CDC descriptors (see "usbnet").  The deal is that there's actually
> no guarantee that there's only one data interface, although that
> seems to hold true for many current products.

Ok... However I don't think i'll find the time to do that right now.
So I think I'll take your advice that it's a good place to pause :)

> But unless you're interested in finishing a much-needed rewrite
> of that cdc-acm probe() code, this might be a good place to stop.
> (Or at least pause!)

Ok, here is the cosmetic patch following the previous one, then :)

HTH,
-- 
Colin

[-- Attachment #2: cdc-acm-cosmetic.patch --]
[-- Type: application/octet-stream, Size: 7663 bytes --]

--- drivers/usb/class/cdc-acm.c.new	2004-04-16 23:44:14.208234976 +0200
+++ drivers/usb/class/cdc-acm.c	2004-04-16 23:44:45.442486648 +0200
@@ -581,138 +581,138 @@
 
 	dev = interface_to_usbdev (intf);
 
-			cfacm = dev->actconfig;
-	
-			/* We know we're probe()d with the control interface. */
-			ifcom = intf->cur_altsetting;
-
-			/* ACM doesn't guarantee the data interface is
-			 * adjacent to the control interface, or that if one
-			 * is there it's not for call management ... so find
-			 * it
-			 */
-			for (j = 0; j < cfacm->desc.bNumInterfaces; j++) {
-				ifdata = cfacm->interface[j]->cur_altsetting;
-				data = cfacm->interface[j];
-
-				if (ifdata->desc.bInterfaceClass == 10 &&
-				    ifdata->desc.bNumEndpoints == 2) {
-					epctrl = &ifcom->endpoint[0].desc;
-					epread = &ifdata->endpoint[0].desc;
-					epwrite = &ifdata->endpoint[1].desc;
-
-					if ((epctrl->bEndpointAddress & 0x80) != 0x80 ||
-					    (epctrl->bmAttributes & 3) != 3 ||
-					    (epread->bmAttributes & 3) != 2 || 
-					    (epwrite->bmAttributes & 3) != 2 ||
-					    ((epread->bEndpointAddress & 0x80) ^ (epwrite->bEndpointAddress & 0x80)) != 0x80) 
-						goto next_interface;
-
-					dbg("found data interface at %d\n", j);
-					break;
-				} else {
+	cfacm = dev->actconfig;
+
+	/* We know we're probe()d with the control interface. */
+	ifcom = intf->cur_altsetting;
+
+	/* ACM doesn't guarantee the data interface is
+	 * adjacent to the control interface, or that if one
+	 * is there it's not for call management ... so find
+	 * it
+	 */
+	for (j = 0; j < cfacm->desc.bNumInterfaces; j++) {
+		ifdata = cfacm->interface[j]->cur_altsetting;
+		data = cfacm->interface[j];
+
+		if (ifdata->desc.bInterfaceClass == 10 &&
+		    ifdata->desc.bNumEndpoints == 2) {
+			epctrl = &ifcom->endpoint[0].desc;
+			epread = &ifdata->endpoint[0].desc;
+			epwrite = &ifdata->endpoint[1].desc;
+
+			if ((epctrl->bEndpointAddress & 0x80) != 0x80 ||
+			    (epctrl->bmAttributes & 3) != 3 ||
+			    (epread->bmAttributes & 3) != 2 || 
+			    (epwrite->bmAttributes & 3) != 2 ||
+			    ((epread->bEndpointAddress & 0x80) ^ (epwrite->bEndpointAddress & 0x80)) != 0x80) 
+				goto next_interface;
+
+			dbg("found data interface at %d\n", j);
+			break;
+		} else {
 next_interface:
-					ifdata = NULL;
-					data = NULL;
-				}
-			}
-
-			/* there's been a problem */
-			if (!ifdata) {
-				dbg("interface not found (%p)\n", ifdata);
-				return -ENODEV;
-
-			}
-
-			for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
-			if (acm_table[minor]) {
-				err("no more free acm devices");
-				return -ENODEV;
-			}
-
-			if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
-				err("out of memory");
-				return -ENOMEM;
-			}
-			memset(acm, 0, sizeof(struct acm));
-
-			ctrlsize = epctrl->wMaxPacketSize;
-			readsize = epread->wMaxPacketSize;
-			acm->writesize = epwrite->wMaxPacketSize;
-			acm->control = intf;
-			acm->data = data;
-			acm->minor = minor;
-			acm->dev = dev;
-
-			acm->bh.func = acm_rx_tasklet;
-			acm->bh.data = (unsigned long) acm;
-			INIT_WORK(&acm->work, acm_softint, acm);
-
-			if (!(buf = kmalloc(ctrlsize + readsize + acm->writesize, GFP_KERNEL))) {
-				err("out of memory");
-				kfree(acm);
-				return -ENOMEM;
-			}
-
-			acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!acm->ctrlurb) {
-				err("out of memory");
-				kfree(acm);
-				kfree(buf);
-				return -ENOMEM;
-			}
-			acm->readurb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!acm->readurb) {
-				err("out of memory");
-				usb_free_urb(acm->ctrlurb);
-				kfree(acm);
-				kfree(buf);
-				return -ENOMEM;
-			}
-			acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!acm->writeurb) {
-				err("out of memory");
-				usb_free_urb(acm->readurb);
-				usb_free_urb(acm->ctrlurb);
-				kfree(acm);
-				kfree(buf);
-				return -ENOMEM;
-			}
-
-			usb_fill_int_urb(acm->ctrlurb, dev, usb_rcvintpipe(dev, epctrl->bEndpointAddress),
-				buf, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
-
-			usb_fill_bulk_urb(acm->readurb, dev, usb_rcvbulkpipe(dev, epread->bEndpointAddress),
-				buf += ctrlsize, readsize, acm_read_bulk, acm);
-			acm->readurb->transfer_flags |= URB_NO_FSBR;
-
-			usb_fill_bulk_urb(acm->writeurb, dev, usb_sndbulkpipe(dev, epwrite->bEndpointAddress),
-				buf += readsize, acm->writesize, acm_write_bulk, acm);
-			acm->writeurb->transfer_flags |= URB_NO_FSBR;
-
-			dev_info(&intf->dev, "ttyACM%d: USB ACM device", minor);
-
-			acm_set_control(acm, acm->ctrlout);
-
-			acm->line.speed = cpu_to_le32(9600);
-			acm->line.databits = 8;
-			acm_set_line(acm, &acm->line);
-
-			if ( (j = usb_driver_claim_interface(&acm_driver, data, acm)) != 0) {
-				err("claim failed");
-				usb_free_urb(acm->ctrlurb);
-				usb_free_urb(acm->readurb);
-				usb_free_urb(acm->writeurb);
-				kfree(acm);
-				kfree(buf);
-				return j;
-			} 
-
-			tty_register_device(acm_tty_driver, minor, &intf->dev);
-
-			acm_table[minor] = acm;
-			usb_set_intfdata (intf, acm);
-			return 0;
+			ifdata = NULL;
+			data = NULL;
+		}
+	}
+
+	/* there's been a problem */
+	if (!ifdata) {
+		dbg("interface not found (%p)\n", ifdata);
+		return -ENODEV;
+
+	}
+
+	for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
+	if (acm_table[minor]) {
+		err("no more free acm devices");
+		return -ENODEV;
+	}
+
+	if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
+		err("out of memory");
+		return -ENOMEM;
+	}
+	memset(acm, 0, sizeof(struct acm));
+
+	ctrlsize = epctrl->wMaxPacketSize;
+	readsize = epread->wMaxPacketSize;
+	acm->writesize = epwrite->wMaxPacketSize;
+	acm->control = intf;
+	acm->data = data;
+	acm->minor = minor;
+	acm->dev = dev;
+
+	acm->bh.func = acm_rx_tasklet;
+	acm->bh.data = (unsigned long) acm;
+	INIT_WORK(&acm->work, acm_softint, acm);
+
+	if (!(buf = kmalloc(ctrlsize + readsize + acm->writesize, GFP_KERNEL))) {
+		err("out of memory");
+		kfree(acm);
+		return -ENOMEM;
+	}
+
+	acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acm->ctrlurb) {
+		err("out of memory");
+		kfree(acm);
+		kfree(buf);
+		return -ENOMEM;
+	}
+	acm->readurb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acm->readurb) {
+		err("out of memory");
+		usb_free_urb(acm->ctrlurb);
+		kfree(acm);
+		kfree(buf);
+		return -ENOMEM;
+	}
+	acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acm->writeurb) {
+		err("out of memory");
+		usb_free_urb(acm->readurb);
+		usb_free_urb(acm->ctrlurb);
+		kfree(acm);
+		kfree(buf);
+		return -ENOMEM;
+	}
+
+	usb_fill_int_urb(acm->ctrlurb, dev, usb_rcvintpipe(dev, epctrl->bEndpointAddress),
+		buf, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
+
+	usb_fill_bulk_urb(acm->readurb, dev, usb_rcvbulkpipe(dev, epread->bEndpointAddress),
+		buf += ctrlsize, readsize, acm_read_bulk, acm);
+	acm->readurb->transfer_flags |= URB_NO_FSBR;
+
+	usb_fill_bulk_urb(acm->writeurb, dev, usb_sndbulkpipe(dev, epwrite->bEndpointAddress),
+		buf += readsize, acm->writesize, acm_write_bulk, acm);
+	acm->writeurb->transfer_flags |= URB_NO_FSBR;
+
+	dev_info(&intf->dev, "ttyACM%d: USB ACM device", minor);
+
+	acm_set_control(acm, acm->ctrlout);
+
+	acm->line.speed = cpu_to_le32(9600);
+	acm->line.databits = 8;
+	acm_set_line(acm, &acm->line);
+
+	if ( (j = usb_driver_claim_interface(&acm_driver, data, acm)) != 0) {
+		err("claim failed");
+		usb_free_urb(acm->ctrlurb);
+		usb_free_urb(acm->readurb);
+		usb_free_urb(acm->writeurb);
+		kfree(acm);
+		kfree(buf);
+		return j;
+	} 
+
+	tty_register_device(acm_tty_driver, minor, &intf->dev);
+
+	acm_table[minor] = acm;
+	usb_set_intfdata (intf, acm);
+	return 0;
 }
 
 static void acm_disconnect(struct usb_interface *intf)

  reply	other threads:[~2004-04-16 22:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-04-15 18:11 2.6.6-rc1: cdc-acm still (differently) broken Colin Leroy
2004-04-15 18:50 ` [linux-usb-devel] " Oliver Neukum
2004-04-15 18:54 ` David Brownell
2004-04-15 19:23   ` Colin Leroy
2004-04-15 19:59     ` David Brownell
2004-04-16 10:24       ` Colin Leroy
2004-04-16 18:44         ` David Brownell
2004-04-16 21:48           ` Colin Leroy [this message]
2004-04-17  9:54             ` [PATCH] " Colin Leroy
2004-04-15 20:24     ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040416234813.0aaa44cf@jack.colino.net \
    --to=colin@colino.net \
    --cc=david-b@pacbell.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.