From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bernhard Rosenkraenzer Subject: Re: ALI M5451 (CMI 9739): PCM always muted? Date: Tue, 20 Apr 2004 19:39:54 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200404201939.54966.bero@arklinux.org> References: <200404171945.35824.bero@arklinux.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Tuesday 20 April 2004 12:39, Takashi Iwai wrote: > > Hi, > > On an ALI M5451 (Using a CMI 9739 - PCI ID 10b9:5451 Sub-ID 1019:0f22), > > snd_ali5451 loads and can adjust mixer settings (except for PCM volume, > > but I think that's a limitation of the hardware), but doesn't make any > > noise - apparently PCM is always muted (volume fixed at 0?). > > there is no PCM volume on CM9739. it has only PCM mute switch. > you can mute on/off via 'M' key of alsamixer. I knew that -- it doesn't make any sound even if it's unmuted though. Nothing useful in dmesg output either. LLaP bero ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click