From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Art Haas" Date: Wed, 21 Apr 2004 19:28:41 +0000 Subject: Re: No luck booting latest 2.6.6-rc kernels Message-Id: <20040421192841.GA2123@artsapartment.org> List-Id: References: <20040421185159.GB7445@artsapartment.org> In-Reply-To: <20040421185159.GB7445@artsapartment.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org On Wed, Apr 21, 2004 at 11:59:16AM -0700, William Lee Irwin III wrote: > On Wed, Apr 21, 2004 at 01:51:59PM -0500, Art Haas wrote: > > Both the 2.6.6-rc1 and 2.6.6-rc2 kernels have failed to boot on my SS20. > > The 2.6.5 kernel is the latest of the 2.6.X series to succeed in > > booting. The new -rc kernels show 'Booting Linux...' on the screen, and > > then things just sit there. The configuration I use hasn't changed > > between 2.6.5 and the newest kernels is the same. > > Are others seeing boot failures with the latest 2.6 kernels? > > Is this booting with -p? Must be early if so. > No, I'm not using '-p' as a boot argument. I've found a bit of text about using a '-p' boot option in arch/sparc/prom/printf.c, but haven't used it before. The 'Booting Linux...' message seems to come from device_scan() in arch/sparc/kernel/devices.c. Art -- Man once surrendering his reason, has no remaining guard against absurdities the most monstrous, and like a ship without rudder, is the sport of every wind. -Thomas Jefferson to James Smith, 1822