From: snagg <snagg@openssl.it>
To: linux-kernel@vger.kernel.org
Subject: schedule() problem
Date: Sat, 15 May 2004 16:13:37 +0200 [thread overview]
Message-ID: <200405151613.41880.snagg@openssl.it> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
[1.] schedule() freeze
[2.]because of a failed control the system crashs , maybe the problem is that
the active_mm of a task is NULL .
[3.]scheduler
[4.]Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2
17:43:01 PDT 2003
[5.]I only have a photo alternauts.altervista.org/schedfault.jpg because after
that the system crashs
[6.]Cannot recreate the problem , sorry
[7.1]
sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux aVaTaR 2.4.22 #6 Tue Sep 2 17:43:01 PDT 2003 i686 unknown unknown
GNU/Linux
Gnu C 3.3.3
Gnu make 3.80
util-linux 2.12
mount 2.12
modutils 2.4.25
e2fsprogs 1.35
jfsutils 1.1.6
xfsprogs 2.6.10
pcmcia-cs 3.2.7
quota-tools 3.09.
PPP 2.4.2
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Linux C++ Library 5.0.5
Procps 2.0.18
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
Modules Loaded soundcore appletalk ipx usb-ohci usbcore 8139too mii
crc32 pcmcia_core ide-scsi agpgart
[7.2]
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.70GHz
stepping : 2
cpu MHz : 1716.928
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3420.97
[7.3]
soundcore 3332 0 (autoclean)
appletalk 21540 1 (autoclean)
ipx 17348 1 (autoclean)
usb-ohci 18888 0 (unused)
usbcore 58400 1 [usb-ohci]
8139too 15240 1
mii 2304 0 [8139too]
crc32 2880 0 [8139too]
pcmcia_core 40032 0
ide-scsi 9424 0
agpgart 39576 0 (unused)
[7.4]
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
c000-cfff : PCI Bus #01
c000-c07f : Silicon Integrated Systems [SiS] SiS65x/M650/740 PCI/AGP VGA
Display Adapter
d800-d8ff : Silicon Integrated Systems [SiS] Sound Controller
dc00-dc7f : Silicon Integrated Systems [SiS] Sound Controller
e000-e0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e000-e0ff : 8139too
f000-f00f : Silicon Integrated Systems [SiS] 5513 [IDE]
f000-f007 : ide0
f008-f00f : ide1
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0dfeffff : System RAM
00100000-002c5635 : Kernel code
002c5636-0035f063 : Kernel data
0dff0000-0dff2fff : ACPI Non-volatile Storage
0dff3000-0dffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : Silicon Integrated Systems [SiS] SiS65x/M650/740 PCI/AGP
VGA Display Adapter
e0000000-e017ffff : vesafb
e8000000-ebffffff : Silicon Integrated Systems [SiS] 650 Host
ec000000-ec0fffff : PCI Bus #01
ec000000-ec01ffff : Silicon Integrated Systems [SiS] SiS65x/M650/740 PCI/AGP
VGA Display Adapter
ec100000-ec100fff : Silicon Integrated Systems [SiS] USB 1.0 Controller
ec100000-ec100fff : usb-ohci
ec101000-ec101fff : Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ec101000-ec101fff : usb-ohci
ec102000-ec1020ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
ec102000-ec1020ff : 8139too
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5]
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650/M650 Host (rev 01)
Subsystem: Silicon Integrated Systems [SiS] 650/M650 Host
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge
(AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ec000000-ec0fffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
Bridge) (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 5
Region 0: Memory at ec100000 (32-bit, non-prefetchable) [size=4K]
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec101000 (32-bit, non-prefetchable) [size=4K]
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
(A,B step)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 4: I/O ports at f000 [size=16]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound
Controller (rev a0)
Subsystem: Giga-byte Technology: Unknown device a001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at ec102000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
65x/M650/740 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA
Display Adapter
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
BIST result: 00
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
[7.6]
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8240B Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
[X]
I read the code of sched.c in kernel 2.4.26 and it seems not to be changed in
the section in wich the problem occurs, however I cannot exploit again the
scedule() so I'm not sure that the error is still there.The kernel is the
official slackware ones.
- --
You can download my public key from :
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xAF03412D
Per me si va tra la perduta gente
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iQCVAwUBQKYllcRZnwcjHpecAQJurgP/RW+kAGHqf9oERBbcqp9epvRlgyK1gCTO
EA0NrQhqeLDLV40ZblP0R+jH/A93EAq3x3xQiZcP4Ck92hbd3HgrUSUFQPbcDYhT
yJO6Y7WusY6ZTW77gM2IJQqppP6r9QZSwv/ZaagZVDjteAfI6V7Qavh4RUYizvUG
poF6mmm5KpA=
=GGlT
-----END PGP SIGNATURE-----
reply other threads:[~2004-05-15 17:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200405151613.41880.snagg@openssl.it \
--to=snagg@openssl.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.