From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Collins Date: Fri, 28 May 2004 11:43:15 +0000 Subject: Re: hme hang in SMP (was: 2.6.6 SMP on UE2 hangs consistently) Message-Id: <20040528114315.GA26289@phunnypharm.org> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org On Fri, May 28, 2004 at 11:07:04AM +0300, Meelis Roos wrote: > > Did you try booting with maxcpus=1 or building without SMP ? > > I did try maxcpus=1 now, this works too in addition to UP. So it's two > CPU-s that's showing the bug, not just SMP kernel. > > Additionally I found out that keyboard is actually OK, I just have to > use the right keymap for 2.6 (duh). So only hme is dieing in real SMP. Very odd. My Ultra2 has an HME, and I have it booted right now in SMP (two CPU's) with the latest bk as of last night (2.6.7-rc1). Working without problems. Same on my 6way e3000. Both of these were running 2.6.6-rc2 for quite awhile without problems aswell. I have a feeling this has more to do with networking than HME specifically. You have a lot of stuff enabled that I don't, like ipv6, netfilter, QoS, IP_PNP, etc. How about disabling all that just to see if it will boot. Then enable one of those subsystems at a time to see what causes it. -- Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ Subversion - http://subversion.tigris.org/ WatchGuard - http://www.watchguard.com/