All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
To: linux-kernel@vger.kernel.org
Subject: Linux 2.4.27-pre5
Date: Wed, 2 Jun 2004 23:24:33 -0300	[thread overview]
Message-ID: <20040603022432.GA6039@logos.cnet> (raw)

Hi, 

Here goes -pre5.

This time we have merges from Jeff's -netdrivers tree, David's -net tree, 
including a fix for compilation error without CONFIG_SCTP set, SPARC64 update,
i810_audio fixes, amongst others.


Summary of changes from v2.4.27-pre4 to v2.4.27-pre5
============================================

<chrisg:etnus.com>:
  o x86-64 only: ia32entry.S reg changes dropped during debugging

<kevin.curtis:farsite.co.uk>:
  o [netdrvr wan] farsync update

<pelle:dsv.su.se>:
  o tulip PCI ID for D-Link DFE-680TXD

<vda:port.imtp.ilyichevsk.odessa.ua>:
  o fealnx #0: replace dev->base_addr with ioaddr; sync with 2.6
  o fealnx #1: replace magic constants with enums
  o fealnx #2: add 'static'; fix wrapped comment
  o fealnx #3: fix pointer substraction bug
  o fealnx #4: stop doing stop_nic_rx/writel(np->crvalue) in rest_rx_descriptors()
  o fealnx #5: introduce stop_nic_rxtx(), use it where makes sense
  o fealnx #6: Francois' fixes for low memory handling; remove free_one_rx_descriptor (not used anymore)
  o fealnx #7: Garzik fix (IIRC): add locking to tx_timeout
  o fealnx #8
  o fealnx #9
  o fealnx #10
  o fealnx #11

Andrew Morton:
  o 8139too not running s3 suspend/resume pci fix

Arjan van de Ven:
  o small change for scsi 2.6 header compatibility
  o [libata] Use standard headers from include/scsi, not drivers/scsi

Daniele Venzano:
  o [netdrvr sis900] fix ISA bridge detection
  o [netdrvr sis900] cosmetic header cleanups
  o [netdrvr sis900] fix missing netif_device_detach() in suspend

David S. Miller:
  o [TCP]: Fix build in 2.4.x with SCTP disabled
  o [PKT_SCHED]: Missing rta_len init in sch_delay
  o [SPARC64]: gcc-3.4.x build fixes

Don Fry:
  o 2.4.27-pre3 pcnet32 add static to two routines
  o 2.4.27-pre3 pcnet32 avoid hard hang with some chip variants
  o 2.4.27-pre3 pcnet32 correct 79C976 variant string
  o 2.4.27-pre3 pcnet32 fix boundary comparison bug
  o 2.4.27-pre3 pcnet32 remove timer and complexity
  o pcnet32: limit frames received during interrupt
  o pcnet32: fix bogus carrier errors with 79c973
  o pcnet32: correct printk for big-endian arch
  o pcnet32: avoid timeout with tcpdump
  o pcnet32: fix for patch 8 le16_to_cpu

François Romieu:
  o [netdrvr r8169] update to 2.6.x version; many fixes and changes

Ganesh Venkatesan:
  o e1000 1/7: Clear auto-mdix mode when forcing link to
  o e1000 2/7: Workaround for link LED staying ON even when
  o e1000 3/7: Determine Link Status correctly while using
  o e1000 4/7: Rewrite logic to estimate # of tx descriptors
  o e1000 6/7: ethtool_ops support
  o e1000 7/7: Error Logging support (enabled/disabled via
  o e100 1/1: Update to sync up version numbers

Jeff Garzik:
  o [sound i810] pci id cleanups
  o [libata] add new ->bmdma_setup hook
  o [libata] use new ->bmdma_{start,setup} method to properly support ATAPI
  o [libata] more ATAPI work - translate SCSI CDB to ATA PACKET
  o [libata] random minor bug fixes
  o [libata] kill ATA_QCFLAG_POLL flag
  o [libata] internal cleanups
  o [libata] minor stuff
  o [libata] handle non-data ATAPI commands via interrupt
  o [libata] DMADIR support
  o [libata] remove redundant use of ATA_QCFLAG_SG in ATAPI packet translation
  o [libata] SCSI->ATA simulator hacking: INQUIRY command
  o [libata] comments and constants
  o [libata] scsi simulator improvements: MODE SENSE, SEEK(6,10), REZERO_UNIT
  o [libata] replace ATA_QCFLAG_ATAPI with inline helper
  o [libata] polish DocBook docs a bit
  o [netdrvr sis900] sync with 2.6.x
  o [netdrvr e1000] use generic ethtool_ops provided in net/core/ethtool.c
  o [libata promise] revert broken taskfile delivery change
  o [libata scsi] ack SYNCHRONIZE CACHE command

Marcelo Tosatti:
  o Changed EXTRAVERSION to -pre5

Patrick McHardy:
  o [IPV4,6]: Fix off-by-one in max protocol-type check

Stefan Rompf:
  o [netdrvr b44] always restore PCI config on resume


             reply	other threads:[~2004-06-03  2:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-03  2:24 Marcelo Tosatti [this message]
2004-06-03 13:31 ` Linux 2.4.27-pre5 Andreas Haumer
2004-06-04  8:38 ` Matthias Andree
2004-06-04 12:46   ` Marcelo Tosatti
2004-06-04 14:41 ` Eric BEGOT
2004-06-04 22:52   ` Adrian Bunk
2004-06-05 10:22     ` Eric BEGOT
2004-06-06 12:15       ` Adrian Bunk
2004-06-06 18:11         ` Eric BEGOT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040603022432.GA6039@logos.cnet \
    --to=marcelo.tosatti@cyclades.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.