All of lore.kernel.org
 help / color / mirror / Atom feed
From: Grant Byers <grant@geltch.id.au>
To: Linux Kernel Mailinglist <linux-kernel@vger.kernel.org>
Subject: Re: [OT] Who has record no. of  DriveReady SeekComplete DataRequest errors?
Date: Mon, 7 Jun 2004 10:21:26 +1000	[thread overview]
Message-ID: <20040607002126.GA6029@pluto.anarchyoz.lan> (raw)
In-Reply-To: <200406070906.46392.kernel@kolivas.org>

On Mon, Jun 07, 2004 at 09:06:46AM +1000, Con Kolivas wrote:
> On Mon, 7 Jun 2004 06:39, Jens Axboe wrote:
> > I could easily imagine some vendors not setting the field, but setting
> > it to some "buggy" value is far less likely. But might as well add the
> > check.
> >
> > Con later confirmed that it was 2.6.2 that introduced the breakage, so
> > the patch isn't the culprit after all. There are a few seperate things
> > to look at there - Con, what are you doing when these messages trigger?
> > Is the drive permanently mounted, or does it happen on open?
> 
> It only happens on boot and never again. During this part:
> ICH4: IDE controller at PCI slot 0000:00:1f.1
> ICH4: chipset revision 2
> ICH4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: ST340014A, ATA DISK drive
> hdb: ST340014A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
> hdd: RICOH CD-R/RW MP7163A, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 1024KiB
> hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>  hda: hda1 hda2 < hda5 hda6 hda7 >
> hdb: max request size: 1024KiB
> hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>  hdb: hdb2 < hdb5 hdb6 hdb7 >
> hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdd: status error: error=0x20LastFailedSense 0x02
> hdd: drive not ready for command
> hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hdd: status error: error=0x00
> ..etc

I can add that I also have a RICOH MP7163A that exhibits exact same
behaviour when booting or on modprobe with ide-cd and cdrom built as
modules.


Cheers,
Grant

  reply	other threads:[~2004-06-07  0:21 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-05 14:07 [OT] Who has record no. of DriveReady SeekComplete DataRequest errors? Con Kolivas
2004-06-05 14:24 ` Jan Dittmer
2004-06-06  9:28 ` Jens Axboe
2004-06-06 10:38   ` Con Kolivas
2004-06-06 10:58     ` Jens Axboe
2004-06-06 11:05       ` Con Kolivas
2004-06-06 11:10         ` Jens Axboe
2004-06-06 11:37           ` Con Kolivas
2004-06-06 11:51             ` Con Kolivas
2004-06-06 12:11   ` Pascal Schmidt
2004-06-06 20:39     ` Jens Axboe
2004-06-06 23:06       ` Con Kolivas
2004-06-07  0:21         ` Grant Byers [this message]
2004-06-07  7:24         ` Jens Axboe
2004-06-07  9:18           ` Con Kolivas
2004-06-07  9:36             ` Jens Axboe
2004-06-07  9:50               ` Con Kolivas
2004-06-07  9:54                 ` Jens Axboe
2004-06-07 10:08                   ` Con Kolivas
2004-06-07 10:17                     ` Jens Axboe
2004-06-07 10:29                       ` Con Kolivas
2004-06-07 10:33                         ` Jens Axboe
2004-06-07 16:29                         ` Jens Axboe
2004-06-07 17:59                           ` Jan Dittmer
2004-06-07 18:06                             ` Jens Axboe
2004-06-08 13:50                           ` Con Kolivas
  -- strict thread matches above, loose matches on Subject: below --
2004-06-05 18:01 Steve Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040607002126.GA6029@pluto.anarchyoz.lan \
    --to=grant@geltch.id.au \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.