From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jody Belka Subject: problems booting Date: Thu, 10 Jun 2004 15:54:34 +0000 Sender: xen-devel-admin@lists.sourceforge.net Message-ID: <20040610155434.GA21187@faith.gentoo.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: xen-devel@lists.sourceforge.net List-Id: xen-devel@lists.xenproject.org Thanks to Keir i've got Xen itself built (although i found i had to do equivalent patches in sched_bvt.c as well). However, i'm now having problems booting the system up. Upon booting the last thing that appears on my screen is the physical and virtual memory arrangement data. After that,nothing unless i remove console=tty0 from the module line, at which point i get these additional lines: (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). (XEN) Give DOM0 read access to all PCI devices (XEN) spurious 8259A interrupt: IRQ7. And then that's it. Any ideas what i'm doing wrong, and suggestions on how to get the thing booting properly? Thanks in advance -- Jody Belka knew (at) pimb (dot) org ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >>From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504