From: Andrew Vasquez <andrew.vasquez@qlogic.com>
To: SCSI Mailing List <linux-scsi@vger.kernel.org>,
James Bottomley <James.Bottomley@steeleye.com>
Subject: PATCH [13/18] qla2xxx: Remove TRUE/FALSE usage
Date: Mon, 21 Jun 2004 22:58:02 -0700 [thread overview]
Message-ID: <20040622055802.GA8476@linux.local.home> (raw)
ChangeSet
1.1849 04/06/17 10:04:59 andrew.vasquez@apc.qlogic.com +5 -0
Christoph Hellwig <hch () lst !de>:
o Remove TRUE/FALSE #define usage within the driver.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
drivers/scsi/qla2xxx/qla_init.c | 34 +++++++++++++++++-----------------
drivers/scsi/qla2xxx/qla_inline.h | 4 ++--
drivers/scsi/qla2xxx/qla_isr.c | 2 +-
drivers/scsi/qla2xxx/qla_mbx.c | 8 ++++----
drivers/scsi/qla2xxx/qla_os.c | 23 ++++++++++-------------
5 files changed, 34 insertions(+), 37 deletions(-)
diff -Nru a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
--- a/drivers/scsi/qla2xxx/qla_init.c 2004-06-21 15:39:31 -07:00
+++ b/drivers/scsi/qla2xxx/qla_init.c 2004-06-21 15:39:31 -07:00
@@ -107,8 +107,8 @@
uint32_t wait_time;
/* Clear adapter flags. */
- ha->flags.online = FALSE;
- ha->flags.reset_active = FALSE;
+ ha->flags.online = 0;
+ ha->flags.reset_active = 0;
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&ha->loop_state, LOOP_DOWN);
ha->device_flags = 0;
@@ -225,7 +225,7 @@
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
ha->marker_needed = 0;
- ha->flags.online = TRUE;
+ ha->flags.online = 1;
} else {
DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
}
@@ -1552,20 +1552,20 @@
if (ha->current_topology == ISP_CFG_FL &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
- ha->flags.rscn_queue_overflow = TRUE;
+ ha->flags.rscn_queue_overflow = 1;
set_bit(RSCN_UPDATE, &flags);
} else if (ha->current_topology == ISP_CFG_F &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
- ha->flags.rscn_queue_overflow = TRUE;
+ ha->flags.rscn_queue_overflow = 1;
set_bit(RSCN_UPDATE, &flags);
clear_bit(LOCAL_LOOP_UPDATE, &flags);
} else if (!ha->flags.online ||
(test_bit(ABORT_ISP_ACTIVE, &flags))) {
- ha->flags.rscn_queue_overflow = TRUE;
+ ha->flags.rscn_queue_overflow = 1;
set_bit(RSCN_UPDATE, &flags);
set_bit(LOCAL_LOOP_UPDATE, &flags);
}
@@ -3103,7 +3103,7 @@
wait_time &&
(test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)));
}
- qla2x00_restart_queues(ha, TRUE);
+ qla2x00_restart_queues(ha, 1);
}
if (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
@@ -4106,7 +4106,7 @@
uint8_t status = 0;
if (ha->flags.online) {
- ha->flags.online = FALSE;
+ ha->flags.online = 0;
clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
qla2x00_stats.ispAbort++;
ha->total_isp_aborts++; /* used by ioctl */
@@ -4171,20 +4171,20 @@
ha->marker_needed = 1;
}
- ha->flags.online = TRUE;
+ ha->flags.online = 1;
/* Enable ISP interrupts. */
qla2x00_enable_intrs(ha);
/* v2.19.5b6 Return all commands */
- qla2x00_abort_queues(ha, TRUE);
+ qla2x00_abort_queues(ha, 1);
/* Restart queues that may have been stopped. */
- qla2x00_restart_queues(ha,TRUE);
+ qla2x00_restart_queues(ha, 1);
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
} else { /* failed the ISP abort */
- ha->flags.online = TRUE;
+ ha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
if (ha->isp_abort_cnt == 0) {
qla_printk(KERN_WARNING, ha,
@@ -4195,8 +4195,8 @@
* completely.
*/
qla2x00_reset_adapter(ha);
- qla2x00_abort_queues(ha, FALSE);
- ha->flags.online = FALSE;
+ qla2x00_abort_queues(ha, 0);
+ ha->flags.online = 0;
clear_bit(ISP_ABORT_RETRY,
&ha->dpc_flags);
status = 0;
@@ -4251,7 +4251,7 @@
/* If firmware needs to be loaded */
if (qla2x00_isp_firmware(ha)) {
- ha->flags.online = FALSE;
+ ha->flags.online = 0;
if (!(status = qla2x00_chip_diag(ha))) {
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
status = qla2x00_setup_chip(ha);
@@ -4290,7 +4290,7 @@
"status = %d\n",
__func__,
status);)
- ha->flags.online = TRUE;
+ ha->flags.online = 1;
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
@@ -4327,7 +4327,7 @@
unsigned long flags = 0;
device_reg_t *reg = ha->iobase;
- ha->flags.online = FALSE;
+ ha->flags.online = 0;
qla2x00_disable_intrs(ha);
/* Reset RISC processor. */
spin_lock_irqsave(&ha->hardware_lock, flags);
diff -Nru a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
--- a/drivers/scsi/qla2xxx/qla_inline.h 2004-06-21 15:39:31 -07:00
+++ b/drivers/scsi/qla2xxx/qla_inline.h 2004-06-21 15:39:31 -07:00
@@ -165,7 +165,7 @@
* wwn = Pointer to WW name to check
*
* Returns:
- * TRUE if name is 0 else FALSE
+ * 1 if name is 0x00 else 0
*
* Context:
* Kernel context.
@@ -179,7 +179,7 @@
if (*wwn != 0)
break;
}
- /* if zero return TRUE */
+ /* if zero return 1 */
if (cnt == WWN_SIZE)
return (1);
else
diff -Nru a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
--- a/drivers/scsi/qla2xxx/qla_isr.c 2004-06-21 15:39:31 -07:00
+++ b/drivers/scsi/qla2xxx/qla_isr.c 2004-06-21 15:39:31 -07:00
@@ -233,7 +233,7 @@
device_reg_t *reg = ha->iobase;
/* Load return mailbox registers. */
- ha->flags.mbox_int = TRUE;
+ ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
wptr = (uint16_t *)MAILBOX_REG(ha, reg, 1);
diff -Nru a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
--- a/drivers/scsi/qla2xxx/qla_mbx.c 2004-06-21 15:39:31 -07:00
+++ b/drivers/scsi/qla2xxx/qla_mbx.c 2004-06-21 15:39:31 -07:00
@@ -89,7 +89,7 @@
}
}
- ha->flags.mbox_busy = TRUE;
+ ha->flags.mbox_busy = 1;
/* Save mailbox command for debug */
ha->mcp = mcp;
@@ -135,7 +135,7 @@
#endif
/* Issue set host interrupt command to send cmd out. */
- ha->flags.mbox_int = FALSE;
+ ha->flags.mbox_int = 0;
clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
/* Unlock mbx registers and wait for interrupt */
@@ -216,7 +216,7 @@
command);)
/* Got interrupt. Clear the flag. */
- ha->flags.mbox_int = FALSE;
+ ha->flags.mbox_int = 0;
clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
if (ha->mailbox_out[0] != MBS_COMMAND_COMPLETE) {
@@ -257,7 +257,7 @@
if (!abort_active)
spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
- ha->flags.mbox_busy = FALSE;
+ ha->flags.mbox_busy = 0;
/* Clean up */
ha->mcp = NULL;
diff -Nru a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
--- a/drivers/scsi/qla2xxx/qla_os.c 2004-06-21 15:39:31 -07:00
+++ b/drivers/scsi/qla2xxx/qla_os.c 2004-06-21 15:39:31 -07:00
@@ -971,7 +971,7 @@
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ);
}
- if (ha->flags.online == TRUE)
+ if (ha->flags.online)
return_status = QLA_SUCCESS;
else
return_status = QLA_FUNCTION_FAILED;
@@ -2216,7 +2216,7 @@
qla2x00_mem_free(ha);
- ha->flags.online = FALSE;
+ ha->flags.online = 0;
/* Detach interrupts */
if (ha->pdev->irq)
@@ -2287,12 +2287,12 @@
*
* inout : decides the direction of the dataflow and the meaning of the
* variables
-* buffer: If inout==FALSE data is being written to it else read from it
+* buffer: If inout==0 data is being written to it else read from it
* (ptr to a page buffer)
-* *start: If inout==FALSE start of the valid data in the buffer
-* offset: If inout==FALSE starting offset from the beginning of all
+* *start: If inout==0 start of the valid data in the buffer
+* offset: If inout==0 starting offset from the beginning of all
* possible data to return.
-* length: If inout==FALSE max number of bytes to be written into the buffer
+* length: If inout==0 max number of bytes to be written into the buffer
* else number of bytes in "buffer"
* Returns:
* < 0: error. errno value.
@@ -2319,7 +2319,7 @@
ha = (scsi_qla_host_t *) shost->hostdata;
- if (inout == TRUE) {
+ if (inout) {
/* Has data been written to the file? */
DEBUG3(printk(
"%s: has data been written to the file. \n",
@@ -2483,6 +2483,7 @@
tq->port_name[4], tq->port_name[5],
tq->port_name[6], tq->port_name[7]);
}
+
copy_info(&info, "\nSCSI LUN Information:\n");
copy_info(&info,
"(Id:Lun) * - indicates lun is not registered with the OS.\n");
@@ -3460,7 +3461,7 @@
DEBUG(printk("scsi(%ld): qla2x00_restart_queues()\n",
ha->host_no));
- qla2x00_restart_queues(ha,FALSE);
+ qla2x00_restart_queues(ha, 0);
DEBUG(printk("scsi(%ld): qla2x00_restart_queues - end\n",
ha->host_no));
@@ -3471,7 +3472,7 @@
DEBUG(printk("scsi(%ld): qla2x00_abort_queues()\n",
ha->host_no));
- qla2x00_abort_queues(ha, FALSE);
+ qla2x00_abort_queues(ha, 0);
DEBUG(printk("scsi(%ld): qla2x00_abort_queues - end\n",
ha->host_no));
@@ -3562,8 +3563,6 @@
if (ha->flags.online && !ha->flags.reset_active &&
!atomic_read(&ha->loop_down_timer) &&
!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
-
- /* 10/15 ha->flags.reset_active = TRUE; */
do {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -3574,8 +3573,6 @@
ha->marker_needed = 1;
} while (!atomic_read(&ha->loop_down_timer) &&
(test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
-
- /* 10/15 ha->flags.reset_active = FALSE; */
}
}
reply other threads:[~2004-06-22 5:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040622055802.GA8476@linux.local.home \
--to=andrew.vasquez@qlogic.com \
--cc=James.Bottomley@steeleye.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.