All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: BlueZ Mailing List <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] AmbiCom BT2000C works with hciattach
Date: Wed, 23 Jun 2004 09:45:11 -0700	[thread overview]
Message-ID: <20040623164511.GE9129@atomide.com> (raw)
In-Reply-To: <1088008008.4209.126.camel@pegasus>

* Marcel Holtmann <marcel@holtmann.org> [040623 09:27]:
> Hi Tony,
> 
> > > how good these news are actually depends on what kernel you are using ;)
> > 
> > Using 2.6.7.
> 
> these are good news, because hci_uart and serial_cs are not working very
> nice together with a 2.6 kernel. May you share some more information
> about your system. For example lspci, lsmod etc.

Sure, it's one of these cheapo emachines m6805 amd64 laptops. Running 
64-bit Gentoo testing. Bluez version: hcidump 1.8, bluez libs
2.7. Bluetooth is compiled into the kernel, PCMCIA is not.

# dmesg | grep -i bluetooth
Bluetooth: Core ver 2.5
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: VHCI driver ver 1.1
Bluetooth: HCI UART driver ver 2.1
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
Bluetooth: BlueFRITZ! USB driver ver 1.1
Bluetooth: L2CAP ver 2.2
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.3
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.0
Bluetooth: BNEP filters: protocol multicast

# cat /proc/cmdline
root=/dev/hda2 ro psmouse.proto=imps apic console=tty0

# cat /proc/interrupts 
           CPU0       
  0:    2959132    IO-APIC-edge  timer
  1:         12    IO-APIC-edge  i8042
  8:          0    IO-APIC-edge  rtc
 10:          0   IO-APIC-level  acpi
 12:         44    IO-APIC-edge  i8042
 14:      15182    IO-APIC-edge  ide0
 15:         19    IO-APIC-edge  ide1
 17:         29   IO-APIC-level  yenta, serial
 18:         27   IO-APIC-level  wifi0
 21:      13975   IO-APIC-level  ehci_hcd, uhci_hcd, uhci_hcd,
 uhci_hcd
 22:          0   IO-APIC-level  VIA8233
 23:       3691   IO-APIC-level  eth0
NMI:       2473 
LOC:    2958687 
ERR:          0
MIS:          0

# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3188 (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b188
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
0000:00:0c.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
0000:00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50)
0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:00:13.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]

# lsmod
Module                  Size  Used by
serial_cs              11176  1 
8250                   23904  3 serial_cs
serial_core            26560  1 8250
via_rhine              23304  0 
hostap_pci             58716  0 
hostap                124240  1 hostap_pci
yenta_socket           21696  1 
snd_via82xx            31172  0 
snd_ac97_codec         74372  1 snd_via82xx
snd_mpu401_uart         8832  1 snd_via82xx
snd_rawmidi            28196  1 snd_mpu401_uart
snd_seq_oss            36416  0 
snd_seq_midi_event      9472  1 snd_seq_oss
snd_seq                58304  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          9164  3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss            58344  0 
snd_pcm               109388  2 snd_via82xx,snd_pcm_oss
snd_page_alloc         13200  2 snd_via82xx,snd_pcm
snd_timer              28232  2 snd_seq,snd_pcm
snd_mixer_oss          20480  1 snd_pcm_oss
snd                    61096  12
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore              12064  1 snd
powernow_k8            12944  0 
processor              19524  1 powernow_k8

      reply	other threads:[~2004-06-23 16:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-23  3:11 [Bluez-devel] AmbiCom BT2000C works with hciattach Tony Lindgren
2004-06-23  7:34 ` Marcel Holtmann
2004-06-23 16:14   ` Tony Lindgren
2004-06-23 16:26     ` Marcel Holtmann
2004-06-23 16:45       ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040623164511.GE9129@atomide.com \
    --to=tony@atomide.com \
    --cc=bluez-devel@lists.sourceforge.net \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.