From: "Chris Rankin" <rankincj@yahoo.com>
To: linux-ide@vger.kernel.org
Cc: meelis.roos@cyber.ee, patrick@dreker.de
Subject: RE: IDE Timeout problem on Intel PIIX3 (Triton 2) chipset
Date: Mon, 28 Jun 2004 21:27:59 +0100 (BST) [thread overview]
Message-ID: <20040628202759.6202.qmail@web52909.mail.yahoo.com> (raw)
> Any kernel above and including 2.4.21 (including
> 2.6.5 and 2.6.7, others not tested) produces the
> following errors quite often (once or twice per
> minute, with the corresponding delay) and the
> harddisk drops out of DMA.
Linux 2.4.26-UP is fine for me here, for both hda and
hdb. This box has 64 MB RAM, amd the kernel is
compiled with gcc-3.2.3.
# lspci
00:00.0 Host bridge: Intel Corp. 430VX - 82437VX TVX
[Triton VX] (rev 02)
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA
[Natoma/Triton II] (rev 01)
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE
[Natoma/Triton II]
00:07.2 USB Controller: Intel Corp. 82371SB PIIX3 USB
[Natoma/Triton II] (rev 01)
00:08.0 VGA compatible controller: ATI Technologies
Inc 3D Rage I/II 215GT [Mach64 GT] (rev 41)
00:0d.0 VGA compatible controller: Matrox Graphics,
Inc. MGA 2164W [Millennium II]
00:0e.0 PCI bridge: Digital Equipment Corporation
DECchip 21152 (rev 03)
00:0f.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 08)
01:04.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 05)
01:05.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 05)
# cat /proc/ide/hda/settings
name value min
max mode
---- ----- ---
--- ----
acoustic 0 0
254 rw
address 0 0
2 rw
bios_cyl 787 0
65535 rw
bios_head 128 0
255 rw
bios_sect 63 0
63 rw
breada_readahead 8 0
255 rw
bswap 0 0
1 r
current_speed 34 0
70 rw
failures 0 0
65535 rw
file_readahead 124 0
16384 rw
init_speed 34 0
70 rw
io_32bit 3 0
3 rw
keepsettings 0 0
1 rw
lun 0 0
7 rw
max_failures 1 0
65535 rw
max_kb_per_request 128 1
255 rw
multcount 16 0
16 rw
nice1 1 0
1 rw
nowerr 0 0
1 rw
number 0 0
3 rw
pio_mode write-only 0
255 w
slow 0 0
1 rw
unmaskirq 1 0
1 rw
using_dma 1 0
1 rw
wcache 0 0
1 rw
# cat /proc/ide/hdb/settings
name value min
max mode
---- ----- ---
--- ----
acoustic 0 0
254 rw
address 0 0
2 rw
bios_cyl 667 0
65535 rw
bios_head 240 0
255 rw
bios_sect 63 0
63 rw
breada_readahead 8 0
255 rw
bswap 0 0
1 r
current_speed 0 0
70 rw
failures 0 0
65535 rw
file_readahead 124 0
16384 rw
init_speed 0 0
70 rw
io_32bit 3 0
3 rw
keepsettings 0 0
1 rw
lun 0 0
7 rw
max_failures 1 0
65535 rw
max_kb_per_request 128 1
255 rw
multcount 16 0
16 rw
nice1 1 0
1 rw
nowerr 0 0
1 rw
number 1 0
3 rw
pio_mode write-only 0
255 w
slow 0 0
1 rw
unmaskirq 1 0
1 rw
using_dma 1 0
1 rw
wcache 0 0
1 rw
# uptime
21:21:38 up 75 days, 1 min, 5 users, load average:
0.00, 0.00, 0.00
Uniform Multi-Platform E-IDE driver Revision:
7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
PIIX3: IDE controller at PCI slot 00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xefa0-0xefa7, BIOS settings:
hda:pio, hdb:pio
ide1: BM-DMA at 0xefa8-0xefaf, BIOS settings:
hdc:pio, hdd:pio
hda: WDC AC33200L, ATA DISK drive
hdb: WDC AC35100L, ATA DISK drive
blk: queue c02b5080, I/O limit 4095Mb (mask
0xffffffff)
blk: queue c02b51bc, I/O limit 4095Mb (mask
0xffffffff)
hdc: TOSHIBA CD-ROM XM-6002B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError
}
hda: 6346368 sectors (3249 MB) w/256KiB Cache,
CHS=787/128/63, DMA
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError
}
hdb: host protected area => 1
hdb: 10085040 sectors (5164 MB) w/256KiB Cache,
CHS=667/240/63, (U)DMA
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 hdb2 hdb3 hdb4
# cat /proc/interrupts
CPU0
0: 648044291 XT-PIC timer
1: 6916 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 27998 XT-PIC serial
9: 385 XT-PIC usb-uhci
10: 13465208 XT-PIC eth2, eth0
11: 604729 XT-PIC eth1
14: 4091193 XT-PIC ide0
15: 36 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
Cheers,
Chris
___________________________________________________________ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself http://uk.messenger.yahoo.com
next reply other threads:[~2004-06-29 1:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-28 20:27 Chris Rankin [this message]
2004-06-29 1:21 ` IDE Timeout problem on Intel PIIX3 (Triton 2) chipset Patrick Dreker
[not found] <E1Bevgk-0007jR-4F@rhn.tartu-labor>
2004-06-28 18:47 ` Meelis Roos
-- strict thread matches above, loose matches on Subject: below --
2004-06-28 12:48 Patrick Dreker
2004-06-28 20:21 ` Bartlomiej Zolnierkiewicz
2004-06-28 23:25 ` Patrick Dreker
2004-06-29 14:48 ` Patrick Dreker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040628202759.6202.qmail@web52909.mail.yahoo.com \
--to=rankincj@yahoo.com \
--cc=linux-ide@vger.kernel.org \
--cc=meelis.roos@cyber.ee \
--cc=patrick@dreker.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.