Re: [LARTC] filter ingress policy rates -> slow!!

From: Edulix <edulix@tumundoweb.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] filter ingress policy rates -> slow!!
Date: Sat, 03 Jul 2004 09:44:46 +0000	[thread overview]
Message-ID: <200407031144.46988.edulix@tumundoweb.com> (raw)
In-Reply-To: <200407011810.01786.edulix@tumundoweb.com>

El Sábado, 3 de Julio de 2004 06:14, gypsy escribió:
> Edulix wrote:
> > Using 2.4.22 here (default of Fedora Core 1).
> >
> > > 2) Post results of
> > > grep "define PSCHED_CLOCK" /usr/src/linux/incluce/net/pkt_sched.h
> >
> > # grep "define PSCHED_CLOCK" /usr/src/linux-2.4/include/net/pkt_sched.h
> > #define PSCHED_CLOCK_SOURCE     PSCHED_JIFFIES
> >
> > does it help ?
>
> Yes, it sure does.
>
> Edit pkt_sched.h and change from JIFFIES to CPU.  Before you recompile
> the kernel, make config and make sure the CPU setting is higher than
> CONFIG_M486 or you'll get an error message.  If you have any of the
> schedule stuff (CONFIG_NET_SCH_blah) as modules (you do):
>
> make (YourFavoriteFlavorOf)config   (checking/changing - if needed - the
> CPU)
> make clean ; make dep ; make bzImage
> make modules
> make modules_install
>
> Those "make"s are broken up like that for a reason.  Just Do It, please.
>
> If you did not have to change the CPU type, you can just reload the
> ingress module:
> modprobe -r sch_ingress
> modprobe sch_ingress
>
> and test the setup.  If you did change the CPU type, you should install
> your new kernel, run lilo and reboot using the new kernel.
>
> buck

Thanks for the info I don't know why I'm having problems compiling the kernel 
image [1]. It looks like a linking issue or a bad module, but I doubt it's 
easy to solve. I am going to change distro in a few days so I think that 
trying to find a solution might be not worthy :-).

What's more, I haven't changed the CPU type (Athlon by default) so I'm trying 
to build modules even without having compiled successfully the kernel image.

BTW, Should I warn the Fedora devels about the JIFFIES problem?

Thanks for your time,
    Edulix.

---
[1] In the execution of 'make bzImage', I get:
----------
make[1]: Saliendo directorio `/usr/src/linux-2.4.22-1.2135.nptl/arch/i386/lib'
make[1]: Cambiando a directorio `/usr/src/linux-2.4.22-1.2135.nptl'
kallsyms pass 1
ld -m elf_i386 -T /usr/src/linux-2.4.22-1.2135.nptl/arch/i386/vmlinux.lds -e 
stext arch/i386/kernel/head.o arch/i386/kernel/init_task.o init/main.o 
init/version.o init/do_mounts.o --start-group arch/i386/kernel/kernel.o 
arch/i386/mm/mm.o kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o  
drivers/acpi/acpi.o drivers/cpufreq/cpufreq.o drivers/char/char.o 
drivers/block/block.o drivers/misc/misc.o drivers/net/net.o 
drivers/char/drm/drm.o drivers/net/fc/fc.o drivers/net/appletalk/appletalk.o 
drivers/net/tokenring/tr.o drivers/net/wan/wan.o drivers/atm/atm.o 
drivers/ide/idedriver.o drivers/cdrom/driver.o drivers/pci/driver.o 
drivers/net/pcmcia/pcmcia_net.o drivers/net/wireless/wireless_net.o 
drivers/pnp/pnp.o drivers/video/video.o drivers/net/hamradio/hamradio.o 
drivers/media/media.o drivers/md/mddev.o drivers/isdn/vmlinux-obj.o 
crypto/crypto.o drivers/sensors/sensor.o 
net/network.o /usr/src/linux-2.4.22-1.2135.nptl/arch/i386/lib/lib.a /usr/src/linux-2.4.22-1.2135.nptl/lib/lib.a /usr/src/linux-2.4.22-1.2135.nptl/arch/i386/lib/lib.a 
--end-group -o .tmp_vmlinux1
drivers/ide/idedriver.o(.text+0x17570): En la función `ide_mediactl':
: undefined reference to `get_info_ptr'
make[1]: *** [kallsyms] Error 1
make[1]: Saliendo directorio `/usr/src/linux-2.4.22-1.2135.nptl'
make: *** [vmlinux] Error 2
----------
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/