All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Paweł Sikora" <pluto@pld-linux.org>
To: linuxppc-dev@lists.linuxppc.org
Subject: [kernel26@ppc] fixes...
Date: Wed, 7 Jul 2004 00:42:56 +0200	[thread overview]
Message-ID: <200407070042.56649.pluto@pld-linux.org> (raw)

[-- Attachment #1: Type: text/plain, Size: 755 bytes --]

Hi,
Could You look at attached patches?

[1] 2.6.7-ppc-asm-defs.patch
assembler reports an error at `dssall'

[2] 2.6.7-ppc-cciss-div.patch
a shift in sector_div() > bit-size of int.

[3] 2.6.7-ppc-ipr-div.patch
similar sector_div() bug.

[4] 2.6.7-ppc-saa7146-workaround.patch
is only workaround for a conflict:

"CC [M]  drivers/media/common/saa7146_video.o
 drivers/media/common/saa7146_video.c:3: error: conflicting types for `memory'
 include/asm-m68k/setup.h:365: error: previous declaration of `memory'"

[5] 2.6.7-ppc-strncasecmp.patch
a confilct with strncasecmp in arch-ppc/lib/strcase.c

-- 
/* Copyright (C) 2003, SCO, Inc. This is valuable Intellectual Property. */

                           #define say(x) lie(x)

[-- Attachment #2: 2.6.7-ppc-asm-defs.patch --]
[-- Type: text/x-diff, Size: 862 bytes --]

--- linux-2.6.7/include/asm-ppc/ppc_asm.h.orig	2004-07-06 16:44:48.000000000 +0200
+++ linux-2.6.7/include/asm-ppc/ppc_asm.h	2004-07-06 16:57:45.784635032 +0200
@@ -73,6 +73,16 @@
 #define REST_16EVR(n,s,base)	REST_8EVR(n,s,base); REST_8EVR(n+8,s,base)
 #define REST_32EVR(n,s,base)	REST_16EVR(n,s,base); REST_16EVR(n+16,s,base)

+/*
+ * Once a version of gas that understands the AltiVec instructions
+  * is freely available, we can do this the normal way...  - paulus
+   */
+#define LVX(r,a,b)	.long	(31<<26)+((r)<<21)+((a)<<16)+((b)<<11)+(103<<1)
+#define STVX(r,a,b)	.long	(31<<26)+((r)<<21)+((a)<<16)+((b)<<11)+(231<<1)
+#define MFVSCR(r)	.long	(4<<26)+((r)<<21)+(770<<1)
+#define MTVSCR(r)	.long	(4<<26)+((r)<<11)+(802<<1)
+#define DSSALL		.long	(0x1f<<26)+(0x10<<21)+(0x336<<1)
+
 #ifdef CONFIG_PPC601_SYNC_FIX
 #define SYNC				\
 BEGIN_FTR_SECTION			\

[-- Attachment #3: 2.6.7-ppc-cciss-div.patch --]
[-- Type: text/x-diff, Size: 680 bytes --]

--- linux-2.6.7/drivers/block/cciss.c.orig	2004-07-06 19:11:30.000000000 +0200
+++ linux-2.6.7/drivers/block/cciss.c	2004-07-06 21:53:26.603620600 +0200
@@ -208,7 +208,7 @@
         ctlr_info_t *h = (ctlr_info_t*)data;
         drive_info_struct *drv;
 	unsigned long flags;
-	unsigned int vol_sz, vol_sz_frac;
+	uint64_t vol_sz, vol_sz_frac;

         ctlr = h->ctlr;

@@ -269,7 +269,7 @@
 		if (drv->raid_level > 5)
 			drv->raid_level = RAID_UNKNOWN;
 		size = sprintf(buffer+len, "cciss/c%dd%d:"
-				"\t%4d.%02dGB\tRAID %s\n",
+				"\t%4llu.%02lluGB\tRAID %s\n",
 				ctlr, i, vol_sz,vol_sz_frac,
 				raid_label[drv->raid_level]);
                 pos += size; len += size;

[-- Attachment #4: 2.6.7-ppc-ipr-div.patch --]
[-- Type: text/x-diff, Size: 356 bytes --]

--- linux-2.6.7/drivers/scsi/ipr.c.orig	2004-07-06 22:03:17.000000000 +0200
+++ linux-2.6.7/drivers/scsi/ipr.c	2004-07-06 23:33:37.539819400 +0200
@@ -2785,7 +2785,8 @@
 			 struct block_device *block_device,
 			 sector_t capacity, int *parm)
 {
-	int heads, sectors, cylinders;
+	int heads, sectors;
+	sector_t cylinders;

 	heads = 128;
 	sectors = 32;

[-- Attachment #5: 2.6.7-ppc-saa7146-workaround.patch --]
[-- Type: text/x-diff, Size: 1021 bytes --]

--- linux-2.6.7/drivers/media/common/saa7146_video.c.orig	2004-06-16 07:19:37.000000000 +0200
+++ linux-2.6.7/drivers/media/common/saa7146_video.c	2004-07-06 23:10:55.768840056 +0200
@@ -1,9 +1,9 @@
 #include <media/saa7146_vv.h>

-static int memory = 32;
+static int capmemory = 32;

-MODULE_PARM(memory,"i");
-MODULE_PARM_DESC(memory, "maximum memory usage for capture buffers (default: 32Mb)");
+MODULE_PARM(capmemory,"i");
+MODULE_PARM_DESC(capmemory, "maximum memory usage for capture buffers (default: 32Mb)");

 #define IS_CAPTURE_ACTIVE(fh) \
 	(((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh))
@@ -1331,9 +1331,9 @@

 	*size = fh->video_fmt.sizeimage;

-	/* check if we exceed the "memory" parameter */
-	if( (*count * *size) > (memory*1048576) ) {
-		*count = (memory*1048576) / *size;
+	/* check if we exceed the "capmemory" parameter */
+	if( (*count * *size) > (capmemory*1048576) ) {
+		*count = (capmemory*1048576) / *size;
 	}

 	DEB_CAP(("%d buffers, %d bytes each.\n",*count,*size));

[-- Attachment #6: 2.6.7-ppc-strncasecmp.patch --]
[-- Type: text/x-diff, Size: 486 bytes --]

--- linux-2.6.7/fs/gfs_locking/lock_gulm/utils_verb_flags.c.orig	2004-07-06 18:20:32.000000000 +0000
+++ linux-2.6.7/fs/gfs_locking/lock_gulm/utils_verb_flags.c	2004-07-06 19:20:55.868623553 +0000
@@ -20,6 +20,7 @@

 #include "gulm_log_msg_bits.h"

+#ifndef CONFIG_PPC
 static __inline__ int
 strncasecmp (const char *s1, const char *s2, size_t l)
 {
@@ -40,6 +41,7 @@
 	}
 	return (c1 - c2);
 }
+#endif

 static int bit_array[16] = { 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4 };


             reply	other threads:[~2004-07-06 22:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-06 22:42 Paweł Sikora [this message]
2004-07-07  6:24 ` [kernel26@ppc] fixes Olaf Hering
2004-07-09  1:04 ` Tom Rini
2004-07-09  8:27   ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200407070042.56649.pluto@pld-linux.org \
    --to=pluto@pld-linux.org \
    --cc=linuxppc-dev@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.