From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Gaydenko Subject: Re: ice1724: from 1.0.4 to 1.0.5a upgrading problem Date: Wed, 14 Jul 2004 17:49:42 +0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200407141749.42615@goldspace.net> References: <200407141718.03846@goldspace.net> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Takashi, To tell the truth, have not understood the word "yet": just now (with 1.0.4) my receiver (as qjackctl) shows 96KHz (alsaplayer-jack-alsadriver-hw:0,1-spdif). Does it mean some redesign was done for this driver since 1.0.4? Andrew ======= On Wednesday 14 July 2004 17:32, Takashi Iwai wrote: ======= At Wed, 14 Jul 2004 17:18:03 +0400, Andrew Gaydenko wrote: > > Hi, > > After upgrading the driver from 1.0.4 to 1.0.5a I'm not able to start jack server > with 96000 rate for alsa driver. I use hw:0,1 device which is digital out in my > Terratek Aureon Space 7.1. Instead of 96000, jack server starts with 48000. For > hw:0,0 the problem doesn't take place. Can anybody point me further direction to > resolve the problem? The digital out doesn't support 96kHz (yet)... ... Takashi ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com