Re: [Repost] IDE error 2.6.7-rc3-mm2 and 2.6.8-rc1-mm1

[tabris <tabris@tabris.net>]

On Thursday 22 July 2004 11:39 am, Jens Axboe wrote:
> On Thu, Jul 22 2004, Tabris wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > Jul 21 03:00:18 tabriel kernel: hda: drive_cmd: status=0x51 {
> > DriveReady SeekComplete Error }
> > Jul 21 03:00:18 tabriel kernel: hda: drive_cmd: error=0x04 {
> > DriveStatusError }
> > Jul 21 03:00:18 tabriel kernel: ide: failed opcode was: 0xe7
> > Jul 21 03:00:23 tabriel kernel: hda: drive_cmd: status=0x51 {
> > DriveReady SeekComplete Error }
> > Jul 21 03:00:23 tabriel kernel: hda: drive_cmd: error=0x04 {
> > DriveStatusError }
> > Jul 21 03:00:23 tabriel kernel: ide: failed opcode was: 0xe7
> > Jul 21 03:00:28 tabriel kernel: hda: drive_cmd: status=0x51 {
> > DriveReady SeekComplete Error }
> > Jul 21 03:00:28 tabriel kernel: hda: drive_cmd: error=0x04 {
> > DriveStatusError }
> > Jul 21 03:00:28 tabriel kernel: ide: failed opcode was: 0xe7
> >
> > 	This error did not occur in 2.6.6-rc3-mm2. Turning off ACPI made
> > no difference, not that I expected one.
> >
> > 	It appears to be harmless but it's polluting my syslog.
> >
> > Appears related to
> > http://marc.theaimsgroup.com/?l=linux-kernel&m=108946389700930
> >
> > 	None of my harddrives are over 60GiB (and hda is an 8GiB), so
> > there's no reason i should be getting LBA48 Flush Cache.
> >
> > 	What should I do, what do you need from me to get to the bottom of
> > this?
>
> Does this work?
	No, however it does seem to start it going in my syslog a bit earlier, 
but that may be meaningless (normally I found it waited until after 
qmail would start).

	Also, my i2c/sensors have stopped working (tho I doubt it has anything 
to do with your patch, it _does_ lineup with my applying your patch and 
rebooting...)

--
tabris
-
Is it weird in here, or is it just me?
		-- Steven Wright