From: Dominik Karall <dominik.karall@gmx.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.8-rc2-mm2
Date: Wed, 4 Aug 2004 18:32:18 +0200 [thread overview]
Message-ID: <200408041832.19646.dominik.karall@gmx.net> (raw)
In-Reply-To: <20040802015527.49088944.akpm@osdl.org>
[-- Attachment #1: Type: text/plain, Size: 642 bytes --]
On Monday 02 August 2004 10:55, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6
>.8-rc2-mm2/
the kernel does not boot on my machine. 2.6.8-rc2 and rc2-mm1 boot fine with
the same .config.
...
Aug 4 17:59:04 mybox kernel: saa7134[0]/audio: audio carrier scan failed,
using 5.500 MHz [default]
Aug 4 17:59:06 mybox kernel: usb 3-1: control timeout on ep0out
Aug 4 17:59:06 mybox kernel: ohci_hcd 0000:00:03.2: Unlink after no-IRQ?
Different ACPI or APIC settings may help.
The saa7134 error also did not appear with 2.6.8-rc2-mm1.
syslog, lspci and .config attached.
thx,
dominik
[-- Attachment #2: syslog.txt --]
[-- Type: text/plain, Size: 24420 bytes --]
Aug 4 17:58:58 mybox syslogd 1.4.1#15: restart.
Aug 4 17:58:58 mybox kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Aug 4 17:58:58 mybox kernel: Inspecting /boot/System.map-2.6.8-rc2-mm2
Aug 4 17:58:58 mybox kernel: Loaded 24870 symbols from /boot/System.map-2.6.8-rc2-mm2.
Aug 4 17:58:58 mybox kernel: Symbols match kernel version 2.6.8.
Aug 4 17:58:58 mybox kernel: No module symbols loaded - kernel modules not enabled.
Aug 4 17:58:58 mybox kernel: Linux version 2.6.8-rc2-mm2 (root@mybox) (gcc-Version 3.4.1 (Debian 3.4.1-5)) #1 Mon Aug 2 17:36:30 CEST 2004
Aug 4 17:58:58 mybox kernel: BIOS-provided physical RAM map:
Aug 4 17:58:58 mybox kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 4 17:58:58 mybox kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Aug 4 17:58:58 mybox kernel: 255MB LOWMEM available.
Aug 4 17:58:58 mybox kernel: On node 0 totalpages: 65520
Aug 4 17:58:58 mybox kernel: DMA zone: 4096 pages, LIFO batch:1
Aug 4 17:58:58 mybox kernel: Normal zone: 61424 pages, LIFO batch:14
Aug 4 17:58:58 mybox kernel: HighMem zone: 0 pages, LIFO batch:1
Aug 4 17:58:58 mybox kernel: DMI 2.3 present.
Aug 4 17:58:58 mybox kernel: ACPI: RSDP (v000 AWARD ) @ 0x000f72b0
Aug 4 17:58:58 mybox kernel: ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
Aug 4 17:58:58 mybox kernel: ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
Aug 4 17:58:58 mybox kernel: ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff69c0
Aug 4 17:58:58 mybox kernel: ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Aug 4 17:58:58 mybox kernel: ACPI: PM-Timer IO Port: 0x1008
Aug 4 17:58:58 mybox kernel: Built 1 zonelists
Aug 4 17:58:58 mybox kernel: Initializing CPU#0
Aug 4 17:58:58 mybox kernel: Kernel command line: BOOT_IMAGE=2.6.8-rc2-mm2 ro root=30a hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
Aug 4 17:58:58 mybox kernel: ide_setup: hda=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hdb=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hdc=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hdd=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hde=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hdf=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hdg=scsi
Aug 4 17:58:58 mybox kernel: ide_setup: hdh=scsi
Aug 4 17:58:58 mybox kernel: CPU 0 irqstacks, hard=c03a1000 soft=c03a0000
Aug 4 17:58:58 mybox kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
Aug 4 17:58:58 mybox kernel: Detected 2673.220 MHz processor.
Aug 4 17:58:58 mybox kernel: Using pmtmr for high-res timesource
Aug 4 17:58:58 mybox kernel: Console: colour dummy device 80x25
Aug 4 17:58:58 mybox kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 4 17:58:58 mybox kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 4 17:58:58 mybox kernel: Memory: 255996k/262080k available (1804k kernel code, 5336k reserved, 744k data, 112k init, 0k highmem)
Aug 4 17:58:58 mybox kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 4 17:58:58 mybox kernel: Calibrating delay loop... 5292.03 BogoMIPS (lpj=2646016)
Aug 4 17:58:58 mybox kernel: Security Scaffold v1.0.0 initialized
Aug 4 17:58:58 mybox kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Aug 4 17:58:58 mybox kernel: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
Aug 4 17:58:58 mybox kernel: CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
Aug 4 17:58:58 mybox kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Aug 4 17:58:58 mybox kernel: CPU: L2 cache: 512K
Aug 4 17:58:58 mybox kernel: CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Aug 4 17:58:58 mybox kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Aug 4 17:58:58 mybox kernel: Enabling fast FPU save and restore... done.
Aug 4 17:58:58 mybox kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 4 17:58:58 mybox kernel: Checking 'hlt' instruction... OK.
Aug 4 17:58:58 mybox kernel: NET: Registered protocol family 16
Aug 4 17:58:58 mybox kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
Aug 4 17:58:58 mybox kernel: PCI: Using configuration type 1
Aug 4 17:58:58 mybox kernel: mtrr: v2.0 (20020519)
Aug 4 17:58:58 mybox kernel: ACPI: Subsystem revision 20040715
Aug 4 17:58:58 mybox kernel: ACPI: IRQ9 SCI: Level Trigger.
Aug 4 17:58:58 mybox kernel: ACPI: Interpreter enabled
Aug 4 17:58:58 mybox kernel: ACPI: Using PIC for interrupt routing
Aug 4 17:58:58 mybox kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Aug 4 17:58:58 mybox kernel: PCI: Probing PCI hardware (bus 00)
Aug 4 17:58:58 mybox kernel: Uncovering SIS963 that hid as a SIS503 (compatible=1)
Aug 4 17:58:58 mybox kernel: Enabling SiS 96x SMBus.
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *13
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Aug 4 17:58:58 mybox kernel: PCI: Using ACPI for IRQ routing
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 9 (level, low) -> IRQ 9
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 9 (level, low) -> IRQ 9
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 5 (level, low) -> IRQ 5
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 10 (level, low) -> IRQ 10
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
Aug 4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 9 (level, low) -> IRQ 9
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Aug 4 17:58:58 mybox kernel: vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, size 10240k
Aug 4 17:58:58 mybox kernel: vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Aug 4 17:58:58 mybox kernel: vesafb: protected mode interface info at c000:e2d0
Aug 4 17:58:58 mybox kernel: vesafb: scrolling: redraw
Aug 4 17:58:58 mybox kernel: vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Aug 4 17:58:58 mybox kernel: fb0: VESA VGA frame buffer device
Aug 4 17:58:58 mybox kernel: udf: registering filesystem
Aug 4 17:58:58 mybox kernel: Initializing Cryptographic API
Aug 4 17:58:58 mybox kernel: Console: switching to colour frame buffer device 160x64
Aug 4 17:58:58 mybox kernel: Linux agpgart interface v0.100 (c) Dave Jones
Aug 4 17:58:58 mybox kernel: agpgart: Detected SiS 648 chipset
Aug 4 17:58:58 mybox kernel: agpgart: Maximum main memory to use for agp memory: 203M
Aug 4 17:58:58 mybox kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Aug 4 17:58:58 mybox kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 4 17:58:58 mybox kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 4 17:58:58 mybox kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
Aug 4 17:58:58 mybox kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 4 17:58:58 mybox kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 4 17:58:58 mybox kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 4 17:58:58 mybox kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
Aug 4 17:58:58 mybox kernel: SIS5513: chipset revision 0
Aug 4 17:58:58 mybox kernel: SIS5513: not 100%% native mode: will probe irqs later
Aug 4 17:58:58 mybox kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Aug 4 17:58:58 mybox kernel: ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
Aug 4 17:58:58 mybox kernel: ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Aug 4 17:58:58 mybox kernel: hda: ST3120023A, ATA DISK drive
Aug 4 17:58:58 mybox kernel: hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
Aug 4 17:58:58 mybox kernel: Using anticipatory io scheduler
Aug 4 17:58:58 mybox kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 4 17:58:58 mybox kernel: hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
Aug 4 17:58:58 mybox kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 4 17:58:58 mybox kernel: hda: max request size: 128KiB
Aug 4 17:58:58 mybox kernel: hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Aug 4 17:58:58 mybox kernel: hda: cache flushes supported
Aug 4 17:58:58 mybox kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Aug 4 17:58:58 mybox kernel: ide-cd: passing drive hdb to ide-scsi emulation.
Aug 4 17:58:58 mybox kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Aug 4 17:58:58 mybox kernel: ide-floppy driver 0.99.newide
Aug 4 17:58:58 mybox kernel: ide-cd: passing drive hdb to ide-scsi emulation.
Aug 4 17:58:58 mybox kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Aug 4 17:58:58 mybox kernel: mice: PS/2 mouse device common for all mice
Aug 4 17:58:58 mybox kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Aug 4 17:58:58 mybox kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Aug 4 17:58:58 mybox kernel: input: PC Speaker
Aug 4 17:58:58 mybox kernel: NET: Registered protocol family 2
Aug 4 17:58:58 mybox kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Aug 4 17:58:58 mybox kernel: TCP: Hash tables configured (established 16384 bind 32768)
Aug 4 17:58:58 mybox kernel: IPv4 over IPv4 tunneling driver
Aug 4 17:58:58 mybox kernel: GRE over IPv4 tunneling driver
Aug 4 17:58:58 mybox kernel: Initializing IPsec netlink socket
Aug 4 17:58:58 mybox kernel: NET: Registered protocol family 1
Aug 4 17:58:58 mybox kernel: NET: Registered protocol family 17
Aug 4 17:58:58 mybox kernel: ACPI: (supports S0 S3 S4 S5)
Aug 4 17:58:58 mybox kernel: ACPI wakeup devices:
Aug 4 17:58:58 mybox kernel: FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
Aug 4 17:58:58 mybox kernel: kjournald starting. Commit interval 5 seconds
Aug 4 17:58:58 mybox kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 4 17:58:58 mybox kernel: VFS: Mounted root (ext3 filesystem) readonly.
Aug 4 17:58:58 mybox kernel: Freeing unused kernel memory: 112k freed
Aug 4 17:58:58 mybox kernel: SCSI subsystem initialized
Aug 4 17:58:58 mybox kernel: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
Aug 4 17:58:58 mybox kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Aug 4 17:58:58 mybox kernel: Vendor: IDE Model: DVD-ROM 16X Rev: 2.05
Aug 4 17:58:58 mybox kernel: Type: CD-ROM ANSI SCSI revision: 02
Aug 4 17:58:58 mybox kernel: scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Aug 4 17:58:58 mybox kernel: Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS2
Aug 4 17:58:58 mybox kernel: Type: CD-ROM ANSI SCSI revision: 02
Aug 4 17:58:58 mybox kernel: hdb: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Aug 4 17:58:58 mybox kernel: ide: failed opcode was 100
Aug 4 17:58:58 mybox kernel: hda: dma_timer_expiry: dma status == 0x60
Aug 4 17:58:58 mybox kernel: hda: DMA timeout retry
Aug 4 17:58:58 mybox kernel: hda: timeout waiting for DMA
Aug 4 17:58:58 mybox kernel: Adding 514040k swap on /dev/hda9. Priority:-1 extents:1
Aug 4 17:58:58 mybox kernel: EXT3 FS on hda10, internal journal
Aug 4 17:58:58 mybox kernel: warning: process `update' used the obsolete bdflush system call
Aug 4 17:58:58 mybox kernel: Fix your initscripts?
Aug 4 17:58:58 mybox kernel: ohci1394: $Rev: 1226 $ Ben Collins <bcollins@debian.org>
Aug 4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 9 (level, low) -> IRQ 9
Aug 4 17:58:58 mybox kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000!
Aug 4 17:58:58 mybox kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e2427000-e24277ff] Max Packet=[2048]
Aug 4 17:58:59 mybox pci.agent[720]: ohci1394: loaded successfully
Aug 4 17:58:59 mybox kernel: snd: Unknown parameter `device_gid'
Aug 4 17:58:59 mybox kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 5 (level, low) -> IRQ 5
Aug 4 17:58:59 mybox kernel: intel8x0_measure_ac97_clock: measured 49512 usecs
Aug 4 17:58:59 mybox kernel: intel8x0: clocking to 48000
Aug 4 17:58:59 mybox pci.agent[782]: snd-intel8x0: loaded successfully
Aug 4 17:58:59 mybox kernel: usbcore: registered new driver usbfs
Aug 4 17:58:59 mybox kernel: usbcore: registered new driver hub
Aug 4 17:58:59 mybox kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Aug 4 17:58:59 mybox kernel: ohci_hcd: block sizes: ed 64 td 64
Aug 4 17:58:59 mybox kernel: ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9
Aug 4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
Aug 4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.0: irq 9, pci mem d12f4000
Aug 4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
Aug 4 17:58:59 mybox kernel: hub 1-0:1.0: USB hub found
Aug 4 17:58:59 mybox kernel: hub 1-0:1.0: 2 ports detected
Aug 4 17:58:59 mybox kernel: ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
Aug 4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
Aug 4 17:58:59 mybox usb.agent[866]: usbcore: already loaded
Aug 4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.1: irq 3, pci mem d12f6000
Aug 4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
Aug 4 17:59:00 mybox usb.agent[917]: usbcore: already loaded
Aug 4 17:59:00 mybox kernel: hub 2-0:1.0: USB hub found
Aug 4 17:59:00 mybox kernel: hub 2-0:1.0: 2 ports detected
Aug 4 17:59:00 mybox kernel: ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 10 (level, low) -> IRQ 10
Aug 4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
Aug 4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.2: irq 10, pci mem d12f8000
Aug 4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
Aug 4 17:59:00 mybox kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001ee09a]
Aug 4 17:59:00 mybox usb.agent[969]: usbcore: already loaded
Aug 4 17:59:00 mybox kernel: hub 3-0:1.0: USB hub found
Aug 4 17:59:00 mybox kernel: hub 3-0:1.0: 2 ports detected
Aug 4 17:59:00 mybox pci.agent[838]: ohci-hcd: loaded successfully
Aug 4 17:59:00 mybox pci.agent[1007]: ohci-hcd: already loaded
Aug 4 17:59:00 mybox kernel: usb 2-1: new full speed USB device using address 2
Aug 4 17:59:00 mybox pci.agent[1035]: ohci-hcd: already loaded
Aug 4 17:59:00 mybox kernel: Initializing USB Mass Storage driver...
Aug 4 17:59:01 mybox kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Aug 4 17:59:01 mybox kernel: ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
Aug 4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
Aug 4 17:59:01 mybox scsi.agent[1124]: disk at /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.0/host2/2:0:0:0
Aug 4 17:59:01 mybox usb.agent[1072]: usb-storage: loaded successfully
Aug 4 17:59:01 mybox kernel: Vendor: Medion Model: Flash XL CF Rev: 2.6D
Aug 4 17:59:01 mybox kernel: Type: Direct-Access ANSI SCSI revision: 02
Aug 4 17:59:01 mybox kernel: USB Mass Storage device found at 2
Aug 4 17:59:01 mybox kernel: usbcore: registered new driver usb-storage
Aug 4 17:59:01 mybox kernel: USB Mass Storage support registered.
Aug 4 17:59:01 mybox kernel: usb 3-1: new full speed USB device using address 2
Aug 4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: irq 11, pci mem d1344000
Aug 4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
Aug 4 17:59:01 mybox kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3
Aug 4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Aug 4 17:59:01 mybox usb.agent[1158]: usbcore: already loaded
Aug 4 17:59:01 mybox kernel: hub 4-0:1.0: USB hub found
Aug 4 17:59:01 mybox kernel: hub 4-0:1.0: 6 ports detected
Aug 4 17:59:01 mybox pci.agent[1097]: ehci-hcd: loaded successfully
Aug 4 17:59:01 mybox kernel: sis900.c: v1.08.07 11/02/2003
Aug 4 17:59:01 mybox kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 0.
Aug 4 17:59:01 mybox kernel: eth0: Realtek RTL8201 PHY transceiver found at address 1.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 2.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 3.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 4.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 5.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 6.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 7.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 8.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 9.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 10.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 11.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 12.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 13.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 14.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 15.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 16.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 17.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 18.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 19.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 20.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 21.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 22.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 23.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 24.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 25.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 26.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 27.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 28.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 29.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 30.
Aug 4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 31.
Aug 4 17:59:01 mybox kernel: eth0: Using transceiver found at address 1 as default
Aug 4 17:59:01 mybox kernel: eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 3, 00:10:dc:af:b9:cc.
Aug 4 17:59:01 mybox pci.agent[1196]: sis900: loaded successfully
Aug 4 17:59:02 mybox kernel: 8139too Fast Ethernet driver 0.9.27
Aug 4 17:59:02 mybox kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
Aug 4 17:59:02 mybox kernel: eth1: RealTek RTL8139 at 0xd1346000, 00:50:fc:2d:da:ef, IRQ 5
Aug 4 17:59:02 mybox kernel: eth1: Identified 8139 chip type 'RTL-8139C'
Aug 4 17:59:02 mybox pci.agent[1242]: 8139too: loaded successfully
Aug 4 17:59:02 mybox kernel: Linux video capture interface: v1.00
Aug 4 17:59:02 mybox kernel: saa7130/34: v4l2 driver version 0.2.12 loaded
Aug 4 17:59:02 mybox kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug 4 17:59:02 mybox kernel: saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 3, latency: 32, mmio: 0xe2426000
Aug 4 17:59:02 mybox kernel: saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
Aug 4 17:59:02 mybox kernel: saa7134[0]: board init: gpio is 0
Aug 4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
Aug 4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
Aug 4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
Aug 4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Aug 4 17:59:02 mybox kernel: tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
Aug 4 17:59:02 mybox kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0]
Aug 4 17:59:02 mybox kernel: tda9885/6/7: chip found @ 0x86
Aug 4 17:59:02 mybox kernel: saa7134[0]: registered device video0 [v4l2]
Aug 4 17:59:02 mybox kernel: saa7134[0]: registered device vbi0
Aug 4 17:59:02 mybox kernel: saa7134[0]: registered device radio0
Aug 4 17:59:02 mybox pci.agent[1290]: saa7134: loaded successfully
Aug 4 17:59:02 mybox pci.rc[641]: ignoring pci display device on 01:00.0
Aug 4 17:59:04 mybox kernel: saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default]
Aug 4 17:59:06 mybox kernel: usb 3-1: control timeout on ep0out
Aug 4 17:59:06 mybox kernel: ohci_hcd 0000:00:03.2: Unlink after no-IRQ? Different ACPI or APIC settings may help.
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 32226 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_PAGG=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8212 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_ARPTABLES=m
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=10
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=y
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_IR=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso8859-15"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_POSIX=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_4KSTACKS=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 10549 bytes --]
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 02)
Subsystem: Silicon Integrated Systems [SiS] SiS 645xx
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=3 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 169
Region 4: I/O ports at 10c0 [size=32]
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 701d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 3000ns max)
Interrupt: pin B routed to IRQ 169
Region 0: Memory at e2427000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin ? routed to IRQ 177
Region 4: I/O ports at 4000 [size=16]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 185
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 193
Region 0: Memory at e2420000 (32-bit, non-prefetchable) [size=4K]
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 201
Region 0: Memory at e2421000 (32-bit, non-prefetchable) [size=4K]
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 209
Region 0: Memory at e2422000 (32-bit, non-prefetchable) [size=4K]
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 217
Region 0: Memory at e2423000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 225
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at e2424000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e2425000 (32-bit, non-prefetchable) [size=256]
0000:00:08.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
Subsystem: Creatix Polymedia GmbH: Unknown device 0003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 225
Region 0: Memory at e2426000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0a.0 Communication controller: Intel Corp. 536EP Data Fax Modem
Subsystem: Creatix Polymedia GmbH V.9X DSP Data Fax Modem
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4M]
Capabilities: [e0] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=375mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0431
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
next prev parent reply other threads:[~2004-08-04 16:40 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-02 8:55 2.6.8-rc2-mm2 Andrew Morton
2004-08-02 9:23 ` 2.6.8-rc2-mm2 Espen Fjellvær Olsen
2004-08-02 12:10 ` 2.6.8-rc2-mm2 Rik van Riel
2004-08-05 10:56 ` 2.6.8-rc2-mm2 Hideo AOKI
2004-08-05 12:55 ` 2.6.8-rc2-mm2 Hideo AOKI
2004-08-02 13:07 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03 6:43 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-03 7:35 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03 7:43 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-03 7:45 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 8:35 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:12 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 10:33 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 11:42 ` 2.6.8-rc2-mm2 bert hubert
2004-08-05 1:21 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:31 ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-04 10:46 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:47 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 12:45 ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-05 2:53 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-05 8:34 ` 2.6.8-rc2-mm2 Helge Hafting
2004-08-05 9:34 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-05 10:47 ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-02 13:52 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 16:12 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 14:28 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-02 15:33 ` 2.6.8-rc2-mm2 Jesper Juhl
2004-08-02 15:38 ` 2.6.8-rc2-mm2 Dominik Karall
2004-08-02 16:02 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-03 6:55 ` 2.6.8-rc2-mm2 Clemens Schwaighofer
2004-08-02 15:57 ` 2.6.8-rc2-mm2 Martin Zwickel
2004-08-02 17:59 ` 2.6.8-rc2-mm2 (compile stats) John Cherry
2004-08-02 18:15 ` 2.6.8-rc2-mm2 Peter Osterlund
2004-08-02 22:16 ` [patch] 2.6.8-rc2-mm2: compile error with SWAP=n Adrian Bunk
2004-08-03 8:27 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-03 13:05 ` 2.6.8-rc2-mm2 R. J. Wysocki
2004-08-03 13:13 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03 19:44 ` 2.6.8-rc2-mm2 Adrian Bunk
2004-08-04 16:32 ` Dominik Karall [this message]
2004-08-05 4:38 ` [sparc32] [1/13] turbosparc flush warnings William Lee Irwin III
2004-08-05 4:39 ` [sparc32] [2/13] sparc32 init_idle() William Lee Irwin III
2004-08-05 4:41 ` [sparc32] [3/13] sun4d cpu_present_map is a cpumask_t William Lee Irwin III
2004-08-05 4:44 ` [sparc32] [4/13] smp_processor_id() BITFIXUP fixes William Lee Irwin III
2004-08-05 4:46 ` [sparc32] [5/13] reinstate smp_reschedule_irq() William Lee Irwin III
2004-08-05 4:47 ` [sparc32] [6/13] remove references to start_secondary() William Lee Irwin III
2004-08-05 4:48 ` [sparc32] [7/13] remove references to num_context_patch2 William Lee Irwin III
2004-08-05 4:49 ` [sparc32] [8/13] define cache_decay_ticks William Lee Irwin III
2004-08-05 4:54 ` [sparc32] [9/13] remove unused variable in dvma.c William Lee Irwin III
2004-08-05 4:55 ` [sparc32] [10/13] sun4 does not support SMP William Lee Irwin III
2004-08-05 4:56 ` [sparc32] [11/13] make CONFIG_SMP depend on CONFIG_BROKEN William Lee Irwin III
2004-08-05 5:01 ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S William Lee Irwin III
2004-08-05 5:31 ` [sparc32] [13/13] ignore undefined symbols with 3 or more leading underscores William Lee Irwin III
2004-08-05 7:28 ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S Jakub Jelinek
2004-08-05 7:38 ` William Lee Irwin III
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200408041832.19646.dominik.karall@gmx.net \
--to=dominik.karall@gmx.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.