[PATCH] pmac_zilog.c: Fix break handling, add sysrq support

[Harald Welte <laforge@gnumonks.org>]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Hi!

This patch fixes the BREAK handling in pmac_zilog.c, and also adds
support for SYSRQ via BREAK.

Please note that I had to remove locking in pmz_consolw_write(), since
it is called from handle_sysrq(), which is in turn called from
pmz_receive_chars(), which is called from with the lock held...

while trying to find out how other drivers handle this problem, I found
out that sn_sal_console_write() has some elaborate code that tries to
steal the lock, etc.

Either something like this is added, or the locking in pmac_zilog()
needs to be reworked.  But that's of course the maintainers' job ;)

Please consider kernel inclusion,

--
- Harald Welte <laforge@gnumonks.org>               http://www.gnumonks.org/
============================================================================
Programming is like sex: One mistake and you have to support it your lifetime

[-- Attachment #2: pmac_zilog.patch --]
[-- Type: text/plain, Size: 2833 bytes --]

--- linux-2.6.8-rc3-plain/drivers/serial/pmac_zilog.c	2004-08-05 14:48:36.000000000 +0200
+++ linux-2.6.8-rc3-hw1/drivers/serial/pmac_zilog.c	2004-08-06 14:37:17.003886152 +0200
@@ -29,6 +29,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
+ * 2004-08-06 Harald Welte <laforge@gnumonks.org>
+ *	- Enable BREAK interrupt
+ *	- Add support for sysreq
+ *
  * TODO:   - Add DMA support
  *         - Defer port shutdown to a few seconds after close
  *         - maybe put something right into uap->clk_divisor
@@ -53,6 +57,7 @@
 #include <linux/slab.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
+#include <linux/sysrq.h>
 #include <asm/sections.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -64,6 +69,10 @@
 #include <asm/macio.h>
 #include <asm/semaphore.h>

+#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/serial.h>
 #include <linux/serial_core.h>

@@ -259,8 +268,10 @@
 		}

 		ch &= uap->parity_mask;
-		if (ch == 0 && uap->prev_status & BRK_ABRT)
+		if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) {
+			uap->flags &= ~PMACZILOG_FLAG_BREAK;
 			r1 |= BRK_ABRT;
+		}

 		/* A real serial line, record the character and status.  */
 		if (drop)
@@ -273,6 +284,7 @@
 		if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
 			error = 1;
 			if (r1 & BRK_ABRT) {
+				printk(KERN_DEBUG "pmz:got break !\n");
 				pmz_debug("pmz: got break !\n");
 				r1 &= ~(PAR_ERR | CRC_ERR);
 				uap->port.icount.brk++;
@@ -364,6 +376,9 @@
 		wake_up_interruptible(&uap->port.info->delta_msr_wait);
 	}

+	if (status & BRK_ABRT)
+		uap->flags |= PMACZILOG_FLAG_BREAK;
+
 	uap->prev_status = status;
 }

@@ -872,8 +887,8 @@
 	uap->curregs[R13] = 0;
 	uap->curregs[R14] = BRENAB;

-	/* Clear handshaking */
-	uap->curregs[R15] = 0;
+	/* Clear handshaking, enable BREAK interrupts */
+	uap->curregs[R15] = BRKIE;

 	/* Master interrupt enable */
 	uap->curregs[R9] |= NV | MIE;
@@ -1919,10 +1934,11 @@
 static void pmz_console_write(struct console *con, const char *s, unsigned int count)
 {
 	struct uart_pmac_port *uap = &pmz_ports[con->index];
-	unsigned long flags;
 	int i;

-	spin_lock_irqsave(&uap->port.lock, flags);
+	/* Don't do any locking here, since we might get called from within
+	 * sysreq() handling and already hold a lock.  Ideally we would need
+	 * something like the 'steal lock' code in sn_sal_console_write -HW */

 	/* Turn of interrupts and enable the transmitter. */
 	write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
@@ -1943,8 +1959,6 @@
 	/* Restore the values in the registers. */
 	write_zsreg(uap, R1, uap->curregs[1]);
 	/* Don't disable the transmitter. */
-
-	spin_unlock_irqrestore(&uap->port.lock, flags);
 }

 /*