Re: 2.6.8-rc4-mm1 doesn't boot

[Adrian Bunk <bunk@fs.tum.de>]

On Wed, Aug 11, 2004 at 05:32:00PM -0400, Len Brown wrote:
> I've never understood this floppy IRQ6 business.
> Apparently it requests IRQ6, but doesn't show up in /proc/interrupts
> 
> In any case, dropping a PCI interrupt on IRQ6 would surely break it
> b/c that would set that IRQ6 to level trigger.
> 
> Before this change, did LNKD get set to something other than IRQ6?

Yes, this is my 2.6.8-rc3-mm1 /proc/interrupts :

<--  snip  -->

           CPU0       
  0:   17615908          XT-PIC  timer
  1:      22333          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  6:      94751          XT-PIC  eth0
  8:          4          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:       5119          XT-PIC  ehci_hcd
 11:    1329292          XT-PIC  Ensoniq AudioPCI, radeon@PCI:1:0:0
 12:     118130          XT-PIC  i8042
 14:      44614          XT-PIC  ide0
 15:         24          XT-PIC  ide1
NMI:          0 
ERR:          8

<--  snip  -->


> -Len

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed