From: Christoph Hellwig <hch@lst.de>
To: g.liakhovetski@gmx.de
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH] clean up some more tmscsim scan logic
Date: Tue, 17 Aug 2004 18:33:23 +0200 [thread overview]
Message-ID: <20040817163323.GA16799@lst.de> (raw)
- cleanup checks in ->queuecommand, we only get here either for
inquiry or a found device now
- DCBmap in the acb is gone, was only used for debug prints after
the prevous changes
- kill some more debugging keyed of by ->scan_devices
--- 1.19/drivers/scsi/scsiiom.c 2004-07-05 00:25:48 +02:00
+++ edited/drivers/scsi/scsiiom.c 2004-08-17 19:56:00 +02:00
@@ -1398,26 +1398,7 @@
pSRB->SRBFlag &= ~AUTO_REQSENSE;
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = CHECK_CONDITION << 1;
-#ifdef DC390_REMOVABLEDEBUG
- switch (pcmd->sense_buffer[2] & 0x0f)
- {
- case NOT_READY: printk (KERN_INFO "DC390: ReqSense: NOT_READY (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i)\n",
- pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN,
- status, pACB->scan_devices); break;
- case UNIT_ATTENTION: printk (KERN_INFO "DC390: ReqSense: UNIT_ATTENTION (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i)\n",
- pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN,
- status, pACB->scan_devices); break;
- case ILLEGAL_REQUEST: printk (KERN_INFO "DC390: ReqSense: ILLEGAL_REQUEST (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i)\n",
- pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN,
- status, pACB->scan_devices); break;
- case MEDIUM_ERROR: printk (KERN_INFO "DC390: ReqSense: MEDIUM_ERROR (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i)\n",
- pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN,
- status, pACB->scan_devices); break;
- case HARDWARE_ERROR: printk (KERN_INFO "DC390: ReqSense: HARDWARE_ERROR (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i)\n",
- pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN,
- status, pACB->scan_devices); break;
- }
-#endif
+
//pcmd->result = MK_RES(DRIVER_SENSE,DID_OK,0,status);
if (status == (CHECK_CONDITION << 1))
{
@@ -1571,23 +1552,6 @@
pDCB->Inquiry7 = ptr->Flags;
ckc_e:
- if( pACB->scan_devices )
- {
- if( pcmd->cmnd[0] == TEST_UNIT_READY ||
- pcmd->cmnd[0] == INQUIRY)
- {
-#ifdef DC390_DEBUG0
- printk (KERN_INFO "DC390: %s: result: %08x",
- (pcmd->cmnd[0] == INQUIRY? "INQUIRY": "TEST_UNIT_READY"),
- pcmd->result);
- if (pcmd->result & (DRIVER_SENSE << 24)) printk (" (sense: %02x %02x %02x %02x)\n",
- pcmd->sense_buffer[0], pcmd->sense_buffer[1],
- pcmd->sense_buffer[2], pcmd->sense_buffer[3]);
- else printk ("\n");
-#endif
- }
- }
-
if( pcmd->cmnd[0] == INQUIRY &&
(pcmd->result == (DID_OK << 16) || status_byte(pcmd->result) & CHECK_CONDITION) )
{
--- 1.45/drivers/scsi/tmscsim.c 2004-07-05 00:35:28 +02:00
+++ edited/drivers/scsi/tmscsim.c 2004-08-17 20:05:52 +02:00
@@ -612,11 +609,7 @@
{
pDCB = pDCB->pNextDCB;
if (pDCB == pACB->pLinkDCB)
- {
- DCBDEBUG(printk (KERN_WARNING "DC390: DCB not found (DCB=%p, DCBmap[%2x]=%2x)\n",
- pDCB, id, pACB->DCBmap[id]));
return 0;
- }
}
DCBDEBUG1( printk (KERN_DEBUG "DCB %p (%02x,%02x) found.\n", \
pDCB, pDCB->TargetID, pDCB->TargetLUN));
@@ -984,28 +977,6 @@
struct dc390_srb* pSRB;
struct dc390_acb* pACB = (struct dc390_acb*) cmd->device->host->hostdata;
- DEBUG0(/* if(pACB->scan_devices) */ \
- printk(KERN_INFO "DC390: Queue Cmd=%02x,Tgt=%d,LUN=%d (pid=%li), buffer=%p\n",\
- cmd->cmnd[0],cmd->device->id,cmd->device->lun,cmd->pid, cmd->buffer));
-
- /* TODO: Change the policy: Always accept TEST_UNIT_READY or INQUIRY
- * commands and alloc a DCB for the device if not yet there. DCB will
- * be removed in dc390_SRBdone if SEL_TIMEOUT */
- if (!(pACB->scan_devices) && !(pACB->DCBmap[cmd->device->id] & (1 << cmd->device->lun))) {
- printk(KERN_INFO "DC390: Ignore target %02x lun %02x\n",
- cmd->device->id, cmd->device->lun);
- goto fail;
- }
-
- /* Should it be: BUG_ON(!pDCB); ? */
-
- if (!pDCB)
- { /* should never happen */
- printk (KERN_ERR "DC390: no DCB found, target %02x lun %02x\n",
- cmd->device->id, cmd->device->lun);
- goto fail;
- }
-
pACB->Cmds++;
cmd->scsi_done = done;
cmd->result = 0;
@@ -1026,10 +997,6 @@
requeue:
return 1;
- fail:
- cmd->result = DID_BAD_TARGET << 16;
- done(cmd);
- return 0;
}
/* We ignore mapping problems, as we expect everybody to respect
@@ -1394,7 +1361,6 @@
static void __devinit dc390_initACB (struct Scsi_Host *psh, unsigned long io_port, u8 Irq, u8 index)
{
struct dc390_acb* pACB;
- u8 i;
psh->can_queue = MAX_CMD_QUEUE;
psh->cmd_per_lun = MAX_CMD_PER_LUN;
@@ -1441,8 +1407,6 @@
dc390_linkSRB( pACB );
pACB->pTmpSRB = &pACB->TmpSRB;
dc390_initSRB( pACB->pTmpSRB );
- for(i=0; i<MAX_SCSI_ID; i++)
- pACB->DCBmap[i] = 0;
pACB->sel_timeout = SEL_TIMEOUT;
pACB->glitch_cfg = EATER_25NS;
pACB->Cmds = pACB->CmdInQ = pACB->CmdOutOfSRB = 0;
@@ -1603,7 +1567,6 @@
pDCB->CtrlR4 |= NEGATE_REQACKDATA | NEGATE_REQACK;
}
- pACB->DCBmap[id] |= (1 << lun);
dc390_updateDCB(pACB, pDCB);
pACB->scan_devices = 1;
@@ -1627,8 +1590,6 @@
BUG_ON(pDCB->GoingSRBCnt > 1);
- pACB->DCBmap[pDCB->TargetID] &= ~(1 << pDCB->TargetLUN);
-
if (pDCB == pACB->pLinkDCB) {
if (pACB->pLastDCB == pDCB) {
pDCB->pNextDCB = NULL;
:q
--- 1.8/drivers/scsi/tmscsim.h 2004-06-24 23:33:43 +02:00
+++ edited/drivers/scsi/tmscsim.h 2004-08-17 19:56:00 +02:00
@@ -163,7 +163,6 @@
struct dc390_srb *pTmpSRB;
u8 msgin123[4];
-u8 DCBmap[MAX_SCSI_ID];
u8 Connected;
u8 pad;
next reply other threads:[~2004-08-17 16:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-17 16:33 Christoph Hellwig [this message]
2004-08-17 20:17 ` [PATCH] clean up some more tmscsim scan logic Guennadi Liakhovetski
2004-08-19 11:33 ` Christoph Hellwig
2004-08-19 21:16 ` Guennadi Liakhovetski
2004-08-19 22:07 ` Luben Tuikov
2004-08-20 20:36 ` Guennadi Liakhovetski
2004-08-21 22:00 ` Guennadi Liakhovetski
2004-08-24 11:36 ` Christoph Hellwig
2004-08-17 20:17 ` Guennadi Liakhovetski
2004-08-17 20:21 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040817163323.GA16799@lst.de \
--to=hch@lst.de \
--cc=g.liakhovetski@gmx.de \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.