From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marc-Christian Petersen <m.c.p@gmx.net>
Date: Tue, 31 Aug 2004 15:02:09 +0000
Subject: Re: [LARTC] RE: [LARTC] Load Balance simply =?iso-8859-1?q?doesn=B4t?= work...
Message-Id: <200408311702.09750@WOLK>
List-Id: <lartc.vger.kernel.org>
References: <1093602365.412f0c3e0230a@www.ire.pw.edu.pl>
In-Reply-To: <1093602365.412f0c3e0230a@www.ire.pw.edu.pl>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

On Thursday 26 August 2004 15:06, Marcos Schonfeld wrote:

Hi Marcos,

> ip route add $P1_NET dev $IF1 src $IP1 table 10
> ip route add default via $P1 table 10
> ip route add $P2_NET dev $IF2 src $IP2 table 20
> ip route add default via $P2 table 20
>
> ip route add $P1_NET dev $IF1 src $IP1  # This may be not necessary
> ip route add $P2_NET dev $IF2 src $IP2  # This may be not necessary
>
> ## ip route add default via $P1  ## You don't have to set this default
> gw, because you'll be routing accross this gateway instead of doing
> load-balance
>
> ip rule add from $IP1 table T1
> ip rule add from $IP2 table T2

shouldn't this be table 10 and table 20? :)

anyway, I have a problem settings this up. I get:


ip route add 212.71.142.210/29 dev eth1 src 212.71.142.210 table 10
RTNETLINK answers: Invalid argument

ip route add default via 212.71.142.209 table 10
ip route add 61.212.57.152/29 dev eth2 src 61.212.57.152 table 20
ip route add default via 61.212.57.153 table 20

ip route add 212.71.142.210/29 dev eth1 src 212.71.142.210
RTNETLINK answers: Invalid argument

ip route add 61.212.57.152/29 dev eth2 src 61.212.57.152
RTNETLINK answers: File exists

ip rule add from 212.71.142.210 table 10
ip rule add from 61.212.57.152 table 20

strace from 1st RTNETLINK invalid argument:

....
controllen=0, msg_flags=0}, 0) = 36
dup(2)                                  = 4
fcntl64(4, F_GETFL)                     = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat64(4, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 0), ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 
0x4b3ed000
_llseek(4, 0, 0xb8526df0, SEEK_CUR)     = -1 ESPIPE (Illegal seek)
write(4, "RTNETLINK answers: Invalid argum"..., 36) = 36
close(4)                                = 0
munmap(0x4b3ed000, 4096)                = 0
brk(0)

any idea what I am doing wrong?

Thanks alot.

-- 
ciao, Marc

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/