From: Alex Zarochentsev <zam@namesys.com>
To: Dave Thomas <linuxsense@gmail.com>
Cc: reiserfs-list@namesys.com
Subject: Re: "WARNING: Wrong master super block magic" message on boot only
Date: Sat, 11 Sep 2004 23:32:17 +0400 [thread overview]
Message-ID: <20040911193217.GR6294@backtop.namesys.com> (raw)
In-Reply-To: <676b8ab0409102026251feacd@mail.gmail.com>
Hi,
On Fri, Sep 10, 2004 at 08:26:23PM -0700, Dave Thomas wrote:
> I am setting up a new test server with Reiser4 and I have noticed an
> error in 'dmesg' when mounting my Reiser4 partition on boot. This is
> the error:
>
> "reiser4[mount(1956)]: _init_read_super
> (fs/reiser4/init_super.c:198)[nikita-2608]:
> WARNING: Wrong master super block magic."
>
> This message only shows up on boot...if I unmount the partition then
> mount it again I do not get that error. I ran a 'fsck' on the
> partition and everything looked OK...output is at end of message. I
> have re-run 'mkfs.reiser4' on the partition but this did not stop the
> 'warning' message on boot.
do you mean that the system could not mount reiser4 volume at boot time?
or it was only reiser4 warning?
>
> I am running Gentoo Linux with gentoo-dev-sources 2.6.8 with
> reiser4progs-1.0.1. The Reiser4 partition is a 200GB partition on a
> software raid mirror.
>
> Thanks for any help on this,
> Dave
>
> Fscking the /dev/md2 block device.
I can only guess that software raid was not started at the moment of first
attempt to mount it. Do other fs work well with the same device?
> Will check the consistency of the Reiser4 SuperBlock.
> Will check the consistency of the Reiser4 FileSystem.
> Continue?
> (Yes/No): yes
> ***** fsck.reiser4 started at Fri Sep 10 13:15:31 2004
> Reiser4 journal (journal40) on /dev/md2: 0 transactions replayed of
> the total 0 blocks.
> Reiser4 fs was detected on /dev/md2.
> Master super block (16):
> magic: ReIsEr4
> blksize: 4096
> format: 0x0 (format40)
> uuid: ab01dab7-e10f-400d-8d1a-7a0000000000
> label: <none>
>
> Format super block (17):
> plugin: format40
> description: Disk-format for reiser4, ver. 1.0.1
> magic: ReIsEr40FoRmAt
> flushes: 0
> mkfs id: 0x3463fc54
> blocks: 50654928
> free blocks: 50653339
> root block: 23
> tail policy: 0x2 (smart)
> next oid: 0x10000
> file count: 0
> tree height: 2
> key policy: LARGE
>
>
> CHECKING STORAGE TREE
> Read nodes 2
> Nodes left in the tree 2
> Leaves of them 1, Twigs of them 1
> Time interval: Fri Sep 10 13:15:43 2004 - Fri Sep 10 13:15:43 2004
> CHECKING EXTENT REGIONS.
> Read twigs 1
> Time interval: Fri Sep 10 13:15:43 2004 - Fri Sep 10 13:15:43 2004
> CHECKING SEMANTIC TREE
> Found 1 objects.
> Time interval: Fri Sep 10 13:15:43 2004 - Fri Sep 10 13:15:43 2004
> ***** fsck.reiser4 finished at Fri Sep 10 13:15:43 2004
> Closing fs...done
>
> FS is consistent.
--
Alex.
next prev parent reply other threads:[~2004-09-11 19:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-11 3:26 "WARNING: Wrong master super block magic" message on boot only Dave Thomas
2004-09-11 19:32 ` Alex Zarochentsev [this message]
2004-09-12 8:02 ` Dave Thomas
2004-09-12 13:07 ` Alex Zarochentsev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040911193217.GR6294@backtop.namesys.com \
--to=zam@namesys.com \
--cc=linuxsense@gmail.com \
--cc=reiserfs-list@namesys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.