From: tabris <tabris@tabris.net>
To: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: Re: undecoded slave?
Date: Thu, 23 Sep 2004 16:30:46 -0400 [thread overview]
Message-ID: <200409231630.49153.tabris@tabris.net> (raw)
In-Reply-To: <200409231314.55547.bzolnier@elka.pw.edu.pl>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Thursday 23 September 2004 7:14 am, Bartlomiej Zolnierkiewicz wrote:
> [ use linux-ide@vger.kernel.org for ATA stuff ]
>
> On Thursday 23 September 2004 05:57, tabris wrote:
> > Probing IDE interface ide3...
> > hdg: Maxtor 4D060H3, ATA DISK drive
> > hdh: Maxtor 4D060H3, ATA DISK drive
> > ide-probe: ignoring undecoded slave
> >
> > Booted 2.6.9-rc2-mm2, and I no longer have an hdh. the error above
> > seems to be the only [stated] reason why.
>
> Please send hdparm -I output for both drives.
As you can see, both drives are the same brand/size/model.
Both are connected to the PDC20265 on my ASUS A7V266-E motherboard.
/dev/hdg:
ATA device, with non-removable media
Model Number: Maxtor 4D060H3
Serial Number: D3000000
Firmware Revision: DAK019K0
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 0
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 120069936
LBA48 user addressable sectors: 120069936
device size with M = 1024*1024: 58627 MBytes
device size with M = 1000*1000: 61475 MBytes (61 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 57 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 192, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
* SMART feature set
* Device Configuration Overlay feature set
* 48-bit Address feature set
Automatic Acoustic Management feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
/dev/hdh:
ATA device, with non-removable media
Model Number: Maxtor 4D060H3
Serial Number: D3000000
Firmware Revision: DAH017K0
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 0
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 120069936
device size with M = 1024*1024: 58627 MBytes
device size with M = 1000*1000: 61475 MBytes (61 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 57 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 192, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
* SMART feature set
* Device Configuration Overlay feature set
Automatic Acoustic Management feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
HW reset results:
CBLID- above Vih
Device num = 1 determined by the jumper
Checksum: correct
- --
tabris
- -
Tomorrow will be cancelled due to lack of interest.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBUzJ41U5ZaPMbKQcRAng0AJ4n5kAJCXwiO2JYu6wKa5RyS47+bQCfUisK
2d1CLQM7Lx1HlHZ6fKswZVk=
=oNxb
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2004-09-24 3:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-23 3:57 undecoded slave? tabris
2004-09-23 4:02 ` Andrew Morton
2004-09-23 7:22 ` tabris
2004-09-23 11:14 ` Bartlomiej Zolnierkiewicz
2004-09-23 20:30 ` tabris [this message]
2004-09-23 21:56 ` Alan Cox
2004-09-23 23:31 ` max file handles max David Lang
2004-09-24 0:09 ` undecoded slave? Bartlomiej Zolnierkiewicz
2004-09-24 1:41 ` Eric Mudama
2004-09-24 8:26 ` tabris
2004-09-24 16:29 ` Eric Mudama
2004-09-24 8:24 ` tabris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200409231630.49153.tabris@tabris.net \
--to=tabris@tabris.net \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@elka.pw.edu.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.