All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guido Guenther <agx@sigxcpu.org>
To: linuxppc-dev@ozlabs.org
Subject: [agx@sigxcpu.org: [PATCH]: swsusp on linux-2.6.9-rc3]
Date: Mon, 4 Oct 2004 13:21:05 +0200	[thread overview]
Message-ID: <20041004112105.GA5637@bogon.ms20.nix> (raw)

Hi,
attached is a forward port of Benjamin's pmdisk code to swsusp which got
finally merged with pmdisk in 2.6.9-rc3. This has only been very lightly
tested but survived a couple of suspend/resumes so far.
Have fun,
 -- Guido

diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/arch/ppc/Kconfig linux-2.6.9-rc3/arch/ppc/Kconfig
--- linux-2.6.9-rc3.orig/arch/ppc/Kconfig	2004-10-03 14:40:38.000000000 +0200
+++ linux-2.6.9-rc3/arch/ppc/Kconfig	2004-10-03 16:37:32.000000000 +0200
@@ -987,6 +987,8 @@
 
 source "drivers/zorro/Kconfig"
 
+source kernel/power/Kconfig
+
 endmenu
 
 menu "Bus options"
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/arch/ppc/kernel/Makefile linux-2.6.9-rc3/arch/ppc/kernel/Makefile
--- linux-2.6.9-rc3.orig/arch/ppc/kernel/Makefile	2004-10-03 14:40:40.000000000 +0200
+++ linux-2.6.9-rc3/arch/ppc/kernel/Makefile	2004-10-03 16:48:32.000000000 +0200
@@ -16,6 +16,7 @@
 					semaphore.o syscalls.o setup.o \
 					cputable.o ppc_htab.o
 obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
+obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_POWER4)		+= cpu_setup_power4.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/arch/ppc/kernel/signal.c linux-2.6.9-rc3/arch/ppc/kernel/signal.c
--- linux-2.6.9-rc3.orig/arch/ppc/kernel/signal.c	2004-10-03 14:40:40.000000000 +0200
+++ linux-2.6.9-rc3/arch/ppc/kernel/signal.c	2004-10-03 16:47:30.000000000 +0200
@@ -28,6 +28,7 @@
 #include <linux/elf.h>
 #include <linux/tty.h>
 #include <linux/binfmts.h>
+#include <linux/suspend.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -604,6 +605,14 @@
 	unsigned long frame, newsp;
 	int signr, ret;
 
+	if (current->flags & PF_FREEZE) {
+		refrigerator(PF_FREEZE);
+		signr = 0;
+		ret = regs->gpr[3];
+		if (!signal_pending(current))
+			goto no_signal;
+	}
+
 	if (!oldset)
 		oldset = &current->blocked;
 
@@ -626,6 +635,7 @@
 			regs->gpr[3] = EINTR;
 			/* note that the cr0.SO bit is already set */
 		} else {
+no_signal:
 			regs->nip -= 4;	/* Back up & retry system call */
 			regs->result = 0;
 			regs->trap = 0;
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/arch/ppc/kernel/swsusp.S linux-2.6.9-rc3/arch/ppc/kernel/swsusp.S
--- linux-2.6.9-rc3.orig/arch/ppc/kernel/swsusp.S	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.9-rc3/arch/ppc/kernel/swsusp.S	2004-10-03 23:53:13.000000000 +0200
@@ -0,0 +1,356 @@
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_SDR1		0xc
+#define SL_SPRG0	0x10	/* 4 sprg's */
+#define SL_DBAT0	0x20
+#define SL_IBAT0	0x28
+#define SL_DBAT1	0x30
+#define SL_IBAT1	0x38
+#define SL_DBAT2	0x40
+#define SL_IBAT2	0x48
+#define SL_DBAT3	0x50
+#define SL_IBAT3	0x58
+#define SL_TB		0x60
+#define SL_R2		0x68
+#define SL_CR		0x6c
+#define SL_LR		0x70
+#define SL_R12		0x74	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .data
+	.align	5
+
+_GLOBAL(swsusp_save_area)
+	.space	SL_SIZE
+
+
+	.section .text
+	.align	5
+
+_GLOBAL(swsusp_arch_suspend)
+
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	mflr	r0
+	stw	r0,SL_LR(r11)
+	mfcr	r0
+	stw	r0,SL_CR(r11)
+	stw	r1,SL_SP(r11)
+	stw	r2,SL_R2(r11)
+	stmw	r12,SL_R12(r11)
+
+	/* Save MSR & SDR1 */
+	mfmsr	r4
+	stw	r4,SL_MSR(r11)
+	mfsdr1	r4
+	stw	r4,SL_SDR1(r11)
+
+	/* Get a stable timebase and save it */
+1:	mftbu	r4
+	stw	r4,SL_TB(r11)
+	mftb	r5
+	stw	r5,SL_TB+4(r11)
+	mftbu	r3
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r11)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG0+4(r11)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG0+8(r11)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG0+12(r11)
+
+	/* Save BATs */
+	mfdbatu	r4,0
+	stw	r4,SL_DBAT0(r11)
+	mfdbatl	r4,0
+	stw	r4,SL_DBAT0+4(r11)
+	mfdbatu	r4,1
+	stw	r4,SL_DBAT1(r11)
+	mfdbatl	r4,1
+	stw	r4,SL_DBAT1+4(r11)
+	mfdbatu	r4,2
+	stw	r4,SL_DBAT2(r11)
+	mfdbatl	r4,2
+	stw	r4,SL_DBAT2+4(r11)
+	mfdbatu	r4,3
+	stw	r4,SL_DBAT3(r11)
+	mfdbatl	r4,3
+	stw	r4,SL_DBAT3+4(r11)
+	mfibatu	r4,0
+	stw	r4,SL_IBAT0(r11)
+	mfibatl	r4,0
+	stw	r4,SL_IBAT0+4(r11)
+	mfibatu	r4,1
+	stw	r4,SL_IBAT1(r11)
+	mfibatl	r4,1
+	stw	r4,SL_IBAT1+4(r11)
+	mfibatu	r4,2
+	stw	r4,SL_IBAT2(r11)
+	mfibatl	r4,2
+	stw	r4,SL_IBAT2+4(r11)
+	mfibatu	r4,3
+	stw	r4,SL_IBAT3(r11)
+	mfibatl	r4,3
+	stw	r4,SL_IBAT3+4(r11)
+
+#if  0
+	/* Backup various CPU config stuffs */
+	bl	__save_cpu_setup
+#endif
+	/* Call the low level suspend stuff (we should probably have made
+	 * a stackframe...
+	 */
+	bl	swsusp_save
+
+	/* Restore LR from the save area */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	blr
+
+
+/* Resume code */
+_GLOBAL(swsusp_arch_resume)
+
+	/* Stop pending alitvec streams and memory accesses */
+BEGIN_FTR_SECTION
+	DSSALL
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ 	sync
+
+	/* Disable MSR:DR to make sure we don't take a TLB or
+	 * hash miss during the copy, as our hash table will
+	 * for a while be unuseable. For .text, we assume we are
+	 * covered by a BAT. This works only for non-G5 at this
+	 * point. G5 will need a better approach, possibly using
+	 * a small temporary hash table filled with large mappings,
+	 * disabling the MMU completely isn't a good option for
+	 * performance reasons.
+	 * (Note that 750's may have the same performance issue as
+	 * the G5 in this case, we should investigate using moving
+	 * BATs for these CPUs)
+	 */
+	mfmsr	r0
+	sync
+	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
+	mtmsr	r0
+	sync
+	isync
+
+	/* Load ptr the list of pages to copy in r3 */
+	lis	r11,(pagedir_nosave - KERNELBASE)@h
+	ori	r11,r11,pagedir_nosave@l
+	lwz	r10,0(r11)
+	tophys(r3,r10)
+
+	/* Load the count of pages to copy in r4 */
+	lis	r11,(nr_copy_pages - KERNELBASE)@h
+	ori	r11,r11,nr_copy_pages@l
+	lwz	r4,0(r11)
+
+
+	/* Copy the pages. This is a very basic implementation, to
+	 * be replaced by something more cache efficient */
+1:
+	li	r0,256
+	mtctr	r0
+	lwz	r11,0(r3)	/* source */
+	tophys(r5,r11)
+	lwz	r10,4(r3)	/* destination */
+	tophys(r6,r10)
+2:
+	lwz	r8,0(r5)
+	lwz	r9,4(r5)
+	lwz	r10,8(r5)
+	lwz	r11,12(r5)
+	addi	r5,r5,16
+	stw	r8,0(r6)
+	stw	r9,4(r6)
+	stw	r10,8(r6)
+	stw	r11,12(r6)
+	addi	r6,r6,16
+	bdnz	2b
+	addi	r3,r3,16
+	subi	r4,r4,1
+	cmpwi	0,r4,0
+	bne	1b
+
+	/* Do a very simple cache flush/inval of the L1 to ensure
+	 * coherency of the icache
+	 */
+	lis	r3,0x0002
+	mtctr	r3
+	li	r3, 0
+1:
+	lwz	r0,0(r3)
+	addi	r3,r3,0x0020
+	bdnz	1b
+	isync
+	sync
+
+	/* Now flush those cache lines */
+	lis	r3,0x0002
+	mtctr	r3
+	li	r3, 0
+1:
+	dcbf	0,r3
+	addi	r3,r3,0x0020
+	bdnz	1b
+	sync
+
+	/* Ok, we are now running with the kernel data of the old
+	 * kernel fully restored. We can get to the save area
+	 * easily now. As for the rest of the code, it assumes the
+	 * loader kernel and the booted one are exactly identical
+	 */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	tophys(r11,r11)
+
+#if 0
+	/* Restore various CPU config stuffs */
+	bl	__restore_cpu_setup
+#endif
+	/* Restore the BATs, and SDR1.  Then we can turn on the MMU.
+	 * This is a bit hairy as we are running out of those BATs,
+	 * but first, our code is probably in the icache, and we are
+	 * writing the same value to the BAT, so that should be fine,
+	 * though a better solution will have to be found long-term
+	 */
+	lwz	r4,SL_SDR1(r11)
+	mtsdr1	r4
+	lwz	r4,SL_SPRG0(r11)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG0+4(r11)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG0+8(r11)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG0+12(r11)
+	mtsprg	3,r4
+
+#if 0
+	lwz	r4,SL_DBAT0(r11)
+	mtdbatu	0,r4
+	lwz	r4,SL_DBAT0+4(r11)
+	mtdbatl	0,r4
+	lwz	r4,SL_DBAT1(r11)
+	mtdbatu	1,r4
+	lwz	r4,SL_DBAT1+4(r11)
+	mtdbatl	1,r4
+	lwz	r4,SL_DBAT2(r11)
+	mtdbatu	2,r4
+	lwz	r4,SL_DBAT2+4(r11)
+	mtdbatl	2,r4
+	lwz	r4,SL_DBAT3(r11)
+	mtdbatu	3,r4
+	lwz	r4,SL_DBAT3+4(r11)
+	mtdbatl	3,r4
+	lwz	r4,SL_IBAT0(r11)
+	mtibatu	0,r4
+	lwz	r4,SL_IBAT0+4(r11)
+	mtibatl	0,r4
+	lwz	r4,SL_IBAT1(r11)
+	mtibatu	1,r4
+	lwz	r4,SL_IBAT1+4(r11)
+	mtibatl	1,r4
+	lwz	r4,SL_IBAT2(r11)
+	mtibatu	2,r4
+	lwz	r4,SL_IBAT2+4(r11)
+	mtibatl	2,r4
+	lwz	r4,SL_IBAT3(r11)
+	mtibatu	3,r4
+	lwz	r4,SL_IBAT3+4(r11)
+	mtibatl	3,r4
+#endif
+
+BEGIN_FTR_SECTION
+	li	r4,0
+	mtspr	SPRN_DBAT4U,r4
+	mtspr	SPRN_DBAT4L,r4
+	mtspr	SPRN_DBAT5U,r4
+	mtspr	SPRN_DBAT5L,r4
+	mtspr	SPRN_DBAT6U,r4
+	mtspr	SPRN_DBAT6L,r4
+	mtspr	SPRN_DBAT7U,r4
+	mtspr	SPRN_DBAT7L,r4
+	mtspr	SPRN_IBAT4U,r4
+	mtspr	SPRN_IBAT4L,r4
+	mtspr	SPRN_IBAT5U,r4
+	mtspr	SPRN_IBAT5L,r4
+	mtspr	SPRN_IBAT6U,r4
+	mtspr	SPRN_IBAT6L,r4
+	mtspr	SPRN_IBAT7U,r4
+	mtspr	SPRN_IBAT7L,r4
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+
+	/* Flush all TLBs */
+	lis	r4,0x1000
+1:	addic.	r4,r4,-0x1000
+	tlbie	r4
+	blt	1b
+	sync
+
+	/* restore the MSR and turn on the MMU */
+	lwz	r3,SL_MSR(r11)
+	bl	turn_on_mmu
+	tovirt(r11,r11)
+
+	/* Restore TB */
+	li	r3,0
+	mttbl	r3
+	lwz	r3,SL_TB(r11)
+	lwz	r4,SL_TB+4(r11)
+	mttbu	r3
+	mttbl	r4
+
+	/* Kick decrementer */
+	li	r0,1
+	mtdec	r0
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r11)
+	mtcr	r0
+	lwz	r2,SL_R2(r11)
+	lmw	r12,SL_R12(r11)
+	lwz	r1,SL_SP(r11)
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	// XXX Note: we don't really need to call swsusp_resume
+
+	li	r3,0
+	blr
+
+/* FIXME:This construct is actually not useful since we don't shut
+ * down the instruction MMU, we could just flip back MSR-DR on.
+ */
+turn_on_mmu:
+	mflr	r4
+	mtsrr0	r4
+	mtsrr1	r3
+	sync
+	isync
+	rfi
+
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/arch/ppc/kernel/vmlinux.lds.S linux-2.6.9-rc3/arch/ppc/kernel/vmlinux.lds.S
--- linux-2.6.9-rc3.orig/arch/ppc/kernel/vmlinux.lds.S	2004-10-03 14:40:40.000000000 +0200
+++ linux-2.6.9-rc3/arch/ppc/kernel/vmlinux.lds.S	2004-10-03 16:47:30.000000000 +0200
@@ -74,6 +74,12 @@
     CONSTRUCTORS
   }
 
+  . = ALIGN(4096);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(4096);
+  __nosave_end = .;
+
   . = ALIGN(32);
   .data.cacheline_aligned : { *(.data.cacheline_aligned) }
 
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/arch/ppc/platforms/pmac_setup.c linux-2.6.9-rc3/arch/ppc/platforms/pmac_setup.c
--- linux-2.6.9-rc3.orig/arch/ppc/platforms/pmac_setup.c	2004-10-03 14:40:43.000000000 +0200
+++ linux-2.6.9-rc3/arch/ppc/platforms/pmac_setup.c	2004-10-03 16:47:30.000000000 +0200
@@ -51,6 +51,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/suspend.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -70,6 +71,8 @@
 #include <asm/pmac_feature.h>
 #include <asm/time.h>
 #include <asm/of_device.h>
+#include <asm/mmu_context.h>
+
 #include "pmac_pic.h"
 #include "mem_pieces.h"
 
@@ -420,11 +423,67 @@
 #endif
 }
 
+/* TODO: Merge the suspend-to-ram with the common code !!!
+ * currently, this is a stub implementation for suspend-to-disk
+ * only
+ */
+
+#ifdef CONFIG_PM_DISK
+
+extern void enable_kernel_altivec(void);
+
+static int pmac_pm_prepare(u32 state)
+{
+	printk(KERN_DEBUG "pmac_pm_prepare(%d)\n", state);
+
+	return 0;
+}
+
+static int pmac_pm_enter(u32 state)
+{
+	printk(KERN_DEBUG "pmac_pm_enter(%d)\n", state);
+
+	/* Giveup the lazy FPU & vec so we don't have to back them
+	 * up from the low level code
+	 */
+	enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+	if (cur_cpu_spec[0]->cpu_features & CPU_FTR_ALTIVEC)
+		enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+	return 0;
+}
+
+static int pmac_pm_finish(u32 state)
+{
+	printk(KERN_DEBUG "pmac_pm_finish(%d)\n", state);
+
+	/* Restore userland MMU context */
+	set_context(current->active_mm->context, current->active_mm->pgd);
+
+	return 0;
+}
+
+static struct pm_ops pmac_pm_ops = {
+	.pm_disk_mode	= PM_DISK_SHUTDOWN,
+	.prepare	= pmac_pm_prepare,
+	.enter		= pmac_pm_enter,
+	.finish		= pmac_pm_finish,
+};
+
+#endif /* CONFIG_PM_DISK */
+
 static int initializing = 1;
 
 static int pmac_late_init(void)
 {
 	initializing = 0;
+
+#ifdef CONFIG_PM_DISK
+	pm_set_ops(&pmac_pm_ops);
+#endif /* CONFIG_PM_DISK */
 	return 0;
 }
 
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/drivers/ide/ppc/pmac.c linux-2.6.9-rc3/drivers/ide/ppc/pmac.c
--- linux-2.6.9-rc3.orig/drivers/ide/ppc/pmac.c	2004-10-03 14:41:11.000000000 +0200
+++ linux-2.6.9-rc3/drivers/ide/ppc/pmac.c	2004-10-03 16:47:30.000000000 +0200
@@ -32,6 +32,7 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/pci.h>
+#include <linux/pm.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
 
@@ -1364,7 +1365,7 @@
 	ide_hwif_t	*hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
 	int		rc = 0;
 
-	if (state != mdev->ofdev.dev.power_state && state >= 2) {
+	if (state != mdev->ofdev.dev.power_state && state == PM_SUSPEND_MEM) {
 		rc = pmac_ide_do_suspend(hwif);
 		if (rc == 0)
 			mdev->ofdev.dev.power_state = state;
@@ -1472,7 +1473,7 @@
 	ide_hwif_t	*hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
 	int		rc = 0;
 	
-	if (state != pdev->dev.power_state && state >= 2) {
+	if (state != pdev->dev.power_state && state == PM_SUSPEND_MEM ) {
 		rc = pmac_ide_do_suspend(hwif);
 		if (rc == 0)
 			pdev->dev.power_state = state;
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/drivers/macintosh/Kconfig linux-2.6.9-rc3/drivers/macintosh/Kconfig
--- linux-2.6.9-rc3.orig/drivers/macintosh/Kconfig	2004-08-14 07:36:56.000000000 +0200
+++ linux-2.6.9-rc3/drivers/macintosh/Kconfig	2004-10-03 16:47:30.000000000 +0200
@@ -80,7 +80,7 @@
 
 config PMAC_PBOOK
 	bool "Power management support for PowerBooks"
-	depends on ADB_PMU
+	depends on PM && ADB_PMU
 	---help---
 	  This provides support for putting a PowerBook to sleep; it also
 	  enables media bay support.  Power management works on the
@@ -97,11 +97,6 @@
 	  have it autoloaded. The act of removing the module shuts down the
 	  sound hardware for more power savings.
 
-config PM
-	bool
-	depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
-	default y
-
 config PMAC_APM_EMU
 	tristate "APM emulation"
 	depends on PMAC_PBOOK
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/drivers/macintosh/mediabay.c linux-2.6.9-rc3/drivers/macintosh/mediabay.c
--- linux-2.6.9-rc3.orig/drivers/macintosh/mediabay.c	2004-08-14 07:36:32.000000000 +0200
+++ linux-2.6.9-rc3/drivers/macintosh/mediabay.c	2004-10-03 16:47:30.000000000 +0200
@@ -713,7 +713,7 @@
 {
 	struct media_bay_info	*bay = macio_get_drvdata(mdev);
 
-	if (state != mdev->ofdev.dev.power_state && state >= 2) {
+	if (state != mdev->ofdev.dev.power_state && state == PM_SUSPEND_MEM) {
 		down(&bay->lock);
 		bay->sleeping = 1;
 		set_mb_power(bay, 0);
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/drivers/macintosh/via-pmu.c linux-2.6.9-rc3/drivers/macintosh/via-pmu.c
--- linux-2.6.9-rc3.orig/drivers/macintosh/via-pmu.c	2004-10-03 14:41:31.000000000 +0200
+++ linux-2.6.9-rc3/drivers/macintosh/via-pmu.c	2004-10-03 16:47:30.000000000 +0200
@@ -43,6 +43,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/suspend.h>
 #include <linux/syscalls.h>
 #include <asm/prom.h>
@@ -2326,7 +2327,7 @@
 	/* Sync the disks. */
 	/* XXX It would be nice to have some way to ensure that
 	 * nobody is dirtying any new buffers while we wait. That
-	 * could be acheived using the refrigerator for processes
+	 * could be achieved using the refrigerator for processes
 	 * that swsusp uses
 	 */
 	sys_sync();
@@ -2379,7 +2380,6 @@
 
 	/* Wait for completion of async backlight requests */
 	while (!bright_req_1.complete || !bright_req_2.complete ||
-
 			!batt_req.complete)
 		pmu_poll();
 
@@ -3048,6 +3048,88 @@
 }
 #endif /* DEBUG_SLEEP */
 
+
+/* FIXME: This is a temporary set of callbacks to enable us
+ * to do suspend-to-disk.
+ */
+
+#ifdef CONFIG_PM
+
+static int pmu_sys_suspended = 0;
+
+static int pmu_sys_suspend(struct sys_device *sysdev, u32 state)
+{
+	if (state != PM_SUSPEND_DISK || pmu_sys_suspended)
+		return 0;
+
+	/* Suspend PMU event interrupts */
+	pmu_suspend();
+
+	pmu_sys_suspended = 1;
+	return 0;
+}
+
+static int pmu_sys_resume(struct sys_device *sysdev)
+{
+	struct adb_request req;
+
+	if (!pmu_sys_suspended)
+		return 0;
+
+	/* Tell PMU we are ready */
+	pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
+	pmu_wait_complete(&req);
+
+	/* Resume PMU event interrupts */
+	pmu_resume();
+
+	pmu_sys_suspended = 0;
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct sysdev_class pmu_sysclass = {
+	set_kset_name("pmu"),
+};
+
+static struct sys_device device_pmu = {
+	.id		= 0,
+	.cls		= &pmu_sysclass,
+};
+
+static struct sysdev_driver driver_pmu = {
+#ifdef CONFIG_PM
+	.suspend	= &pmu_sys_suspend,
+	.resume		= &pmu_sys_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_pmu_sysfs(void)
+{
+	int rc;
+
+	rc = sysdev_class_register(&pmu_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering PMU sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_pmu);
+	if (rc) {
+		printk(KERN_ERR "Failed registering PMU sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&pmu_sysclass, &driver_pmu);
+	if (rc) {
+		printk(KERN_ERR "Failed registering PMU sys driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_pmu_sysfs);
+
 EXPORT_SYMBOL(pmu_request);
 EXPORT_SYMBOL(pmu_poll);
 EXPORT_SYMBOL(pmu_poll_adb);
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/drivers/video/aty/radeon_pm.c linux-2.6.9-rc3/drivers/video/aty/radeon_pm.c
--- linux-2.6.9-rc3.orig/drivers/video/aty/radeon_pm.c	2004-08-14 07:37:26.000000000 +0200
+++ linux-2.6.9-rc3/drivers/video/aty/radeon_pm.c	2004-10-03 16:47:36.000000000 +0200
@@ -859,6 +859,8 @@
 	 * know we'll be rebooted, ...
 	 */
 
+	if (state != PM_SUSPEND_MEM)
+		return 0;
 	printk(KERN_DEBUG "radeonfb: suspending to state: %d...\n", state);
 	
 	acquire_console_sem();
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/include/asm-ppc/suspend.h linux-2.6.9-rc3/include/asm-ppc/suspend.h
--- linux-2.6.9-rc3.orig/include/asm-ppc/suspend.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.9-rc3/include/asm-ppc/suspend.h	2004-10-03 16:47:36.000000000 +0200
@@ -0,0 +1,12 @@
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+static inline void save_processor_state(void)
+{
+}
+
+static inline void restore_processor_state(void)
+{
+}
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/include/linux/reboot.h linux-2.6.9-rc3/include/linux/reboot.h
--- linux-2.6.9-rc3.orig/include/linux/reboot.h	2004-08-14 07:38:11.000000000 +0200
+++ linux-2.6.9-rc3/include/linux/reboot.h	2004-10-03 16:47:36.000000000 +0200
@@ -42,6 +42,8 @@
 extern int register_reboot_notifier(struct notifier_block *);
 extern int unregister_reboot_notifier(struct notifier_block *);
 
+/* For use by swsusp only */
+extern struct notifier_block *reboot_notifier_list;
 
 /*
  * Architecture-specific implementations of sys_reboot commands.
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/include/linux/suspend.h linux-2.6.9-rc3/include/linux/suspend.h
--- linux-2.6.9-rc3.orig/include/linux/suspend.h	2004-10-03 14:42:18.000000000 +0200
+++ linux-2.6.9-rc3/include/linux/suspend.h	2004-10-03 16:47:36.000000000 +0200
@@ -1,7 +1,7 @@
 #ifndef _LINUX_SWSUSP_H
 #define _LINUX_SWSUSP_H
 
-#ifdef CONFIG_X86
+#if (defined  CONFIG_X86) || (defined CONFIG_PPC32)
 #include <asm/suspend.h>
 #endif
 #include <linux/swap.h>
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/kernel/power/disk.c linux-2.6.9-rc3/kernel/power/disk.c
--- linux-2.6.9-rc3.orig/kernel/power/disk.c	2004-10-03 14:42:20.000000000 +0200
+++ linux-2.6.9-rc3/kernel/power/disk.c	2004-10-03 23:42:33.000000000 +0200
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
+#include <linux/reboot.h>
 #include "power.h"
 
 
@@ -46,14 +47,15 @@
 	unsigned long flags;
 	int error = 0;
 
-	local_irq_save(flags);
 	switch(mode) {
 	case PM_DISK_PLATFORM:
-		device_power_down(PM_SUSPEND_DISK);
+	    	local_irq_save(flags);
 		error = pm_ops->enter(PM_SUSPEND_DISK);
+		local_irq_restore(flags);
 		break;
 	case PM_DISK_SHUTDOWN:
 		printk("Powering off system\n");
+    		notifier_call_chain(&reboot_notifier_list, SYS_POWER_OFF, NULL);
 		device_shutdown();
 		machine_power_off();
 		break;
@@ -171,6 +173,7 @@
 	in_suspend = 1;
 	if ((error = swsusp_suspend()))
 		goto Done;
+	pr_debug("PM: after memory snapshot.\n");
 
 	if (in_suspend) {
 		pr_debug("PM: writing image.\n");
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/kernel/power/main.c linux-2.6.9-rc3/kernel/power/main.c
--- linux-2.6.9-rc3.orig/kernel/power/main.c	2004-10-03 14:42:20.000000000 +0200
+++ linux-2.6.9-rc3/kernel/power/main.c	2004-10-03 16:47:36.000000000 +0200
@@ -4,7 +4,7 @@
  * Copyright (c) 2003 Patrick Mochel
  * Copyright (c) 2003 Open Source Development Lab
  * 
- * This file is release under the GPLv2
+ * This file is released under the GPLv2
  *
  */
 
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/kernel/power/swsusp.c linux-2.6.9-rc3/kernel/power/swsusp.c
--- linux-2.6.9-rc3.orig/kernel/power/swsusp.c	2004-10-03 14:42:20.000000000 +0200
+++ linux-2.6.9-rc3/kernel/power/swsusp.c	2004-10-03 23:29:34.000000000 +0200
@@ -854,14 +854,16 @@
 	if ((error = arch_prepare_suspend()))
 		return error;
 	local_irq_disable();
+	device_power_down(PM_SUSPEND_DISK);
 	save_processor_state();
 	error = swsusp_arch_suspend();
 	restore_processor_state();
+	device_power_up();
 	local_irq_enable();
 	return error;
 }
 
-
+#if 0
 asmlinkage int swsusp_restore(void)
 {
 	BUG_ON (nr_copy_pages_check != nr_copy_pages);
@@ -871,15 +873,18 @@
 	__flush_tlb_global();
 	return 0;
 }
+#endif
 
 int swsusp_resume(void)
 {
 	int error;
 	local_irq_disable();
+	device_power_down(PM_SUSPEND_DISK);
 	save_processor_state();
 	error = swsusp_arch_resume();
 	restore_processor_state();
 	restore_highmem();
+	device_power_up();
 	local_irq_enable();
 	return error;
 }
@@ -1165,7 +1170,7 @@
 		return -ENOMEM;
 	pagedir_nosave = (struct pbe *)addr;
 
-	pr_debug("pmdisk: Reading pagedir (%d Pages)\n",n);
+	pr_debug("swsusp: Reading pagedir (%d Pages)\n",n);
 
 	for (i = 0; i < n && !error; i++, addr += PAGE_SIZE) {
 		unsigned long offset = swp_offset(swsusp_info.pagedir[i]);
@@ -1195,7 +1200,7 @@
 }
 
 /**
- *	pmdisk_read - Read saved image from swap.
+ *	swsusp_read - Read saved image from swap.
  */
 
 int __init swsusp_read(void)
@@ -1219,6 +1224,6 @@
 	if (!error)
 		pr_debug("Reading resume file was successful\n");
 	else
-		pr_debug("pmdisk: Error %d resuming\n", error);
+		pr_debug("swsusp: Error %d resuming\n", error);
 	return error;
 }
diff -ubw --exclude='*.orig' --exclude='*.o' --exclude='*.ko' --exclude='*.cmd' --exclude='*.o' --exclude=CVS/ --exclude=.svn --exclude='*.mod' --exclude='.*' --exclude='*.rej' --exclude='*.orig' --exclude='*.symvers' --exclude=debian --exclude='*.a' --exclude='*.mod.c' --exclude=asm/ -Nur linux-2.6.9-rc3.orig/kernel/sys.c linux-2.6.9-rc3/kernel/sys.c
--- linux-2.6.9-rc3.orig/kernel/sys.c	2004-10-03 14:42:20.000000000 +0200
+++ linux-2.6.9-rc3/kernel/sys.c	2004-10-03 16:47:39.000000000 +0200
@@ -84,7 +84,7 @@
  *	and the like. 
  */
 
-static struct notifier_block *reboot_notifier_list;
+struct notifier_block *reboot_notifier_list;
 rwlock_t notifier_lock = RW_LOCK_UNLOCKED;
 
 /**


----- End forwarded message -----

             reply	other threads:[~2004-10-04 11:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-10-04 11:21 Guido Guenther [this message]
2004-10-04 13:39 ` [agx@sigxcpu.org: [PATCH]: swsusp on linux-2.6.9-rc3] Benjamin Herrenschmidt
2004-10-04 13:51   ` Guido Guenther
2004-10-04 14:14     ` Benjamin Herrenschmidt
2004-10-04 15:12       ` Guido Guenther
2004-10-04 19:57         ` Segher Boessenkool
2004-10-05  6:57           ` Guido Guenther
2004-10-05  7:24             ` Benjamin Herrenschmidt
2004-10-04 23:18         ` Benjamin Herrenschmidt
2004-10-05  6:58           ` Guido Guenther
2004-10-05  7:26             ` Benjamin Herrenschmidt
2004-10-04 22:07   ` John Steele Scott
2004-10-04 23:27     ` Benjamin Herrenschmidt
2004-10-05  8:12       ` John Steele Scott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20041004112105.GA5637@bogon.ms20.nix \
    --to=agx@sigxcpu.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.