From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ing. Hugo Mora" Subject: libata (sil + seagate) Date: Wed, 6 Oct 2004 12:49:12 -0500 Sender: linux-ide-owner@vger.kernel.org Message-ID: <200410061249.13403.h.mora@melix.com.mx> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from dsl-200-67-111-248.prod-empresarial.com.mx ([200.67.111.248]:5568 "EHLO bli.melix.com.mx") by vger.kernel.org with ESMTP id S269337AbUJFRt1 convert rfc822-to-8bit (ORCPT ); Wed, 6 Oct 2004 13:49:27 -0400 Received: from [192.168.9.7] (hugo.local [192.168.9.7]) by bli.melix.com.mx (Postfix) with ESMTP id 4E659716AE for ; Wed, 6 Oct 2004 12:49:22 -0500 (CDT) Content-Disposition: inline List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hi Jeff, Hope not being bothering you, I have a gigabyte 7N400 Pro2 mobo, and I'= m still=20 having problems, I tryied kernel 2.6.8.1 and i have this error: Oct 5 01:15:04 linux kernel: ata1: command 0x35 timeout, stat 0x58 hos= t_stat=20 0x1 Oct 5 01:15:04 linux kernel: ata1: status=3D0x58 { DriveReady SeekComp= lete=20 DataRequest } Oct 5 01:15:04 linux kernel: SCSI error : <0 0 0 0> return code =3D 0x= 8000002 Oct 5 01:15:04 linux kernel: EOM ILI Current sda: sense =3D 70 69 Oct 5 01:15:04 linux kernel: ASC=3D62 ASCQ=3D61 Oct 5 01:15:04 linux kernel: end_request: I/O error, dev sda, sector=20 164906075 Oct 5 01:15:04 linux kernel: Buffer I/O error on device sda6, logical = block=20 3713 Oct 5 01:15:04 linux kernel: lost page write due to I/O error on sda6 Oct 5 01:15:04 linux kernel: ATA: abnormal status 0x58 on port 0xE0804= 087 the weird thing, is that I tryied Knoppix 3.6 whit 2.4.27 and the it wo= rked,=20 mi chipset is sil3512 and discs are ST3120026AS Barracuda 7200.7 SA= TA=20 with firmware 3.56. So, if you have some code that you want me to test it, feel free to sen= d me, I=20 can help you to test in ths machine (and hope there can be a patch to a= pply=20 to a SuSE kernel to keep using that distro, a vanilla kernel doesen't w= ork) Thanks in advance and greetings from Guadalajara Jalisco, M=E9xico. boot.log of the libata ***********************************************************************= *********************** <7>libata version 1.02 loaded. <7>sata_sil version 0.54 <6>ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 11 (level, low) -> IRQ 11 <6>ata1: SATA max UDMA/100 cmd 0xE0804080 ctl 0xE080408A bmdma 0xE08040= 00 irq=20 11 <6>ata2: SATA max UDMA/100 cmd 0xE08040C0 ctl 0xE08040CA bmdma 0xE08040= 08 irq=20 11 <7>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4= 003=20 88:207f <6>ata1: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 <6>ata1: dev 0 configured for UDMA/100 <6>scsi0 : sata_sil <7>ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4= 003=20 88:207f <6>ata2: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 <6>ata2: dev 0 configured for UDMA/100 <6>scsi1 : sata_sil <5> Vendor: ATA Model: ST3120026AS Rev: 3.56 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 > <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <5> Vendor: ATA Model: ST3120026AS Rev: 3.56 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) <5>SCSI device sdb: drive cache: write back <6> sdb: sdb1 <5>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 ******************************************************************* --=20 --------------------- Ing. Hugo Mora Investigaci=F3n y desarrollo M=E9lix - Especialistas en Software Libre, 45160 Zapopan, M=E9xico tel. +52-33-3833 3289 fax +52-33-3636 0925 http://melix.com.mx =20