From: Arjan van de Ven <arjan@infradead.org>
To: jgarzik@pobox.com
Cc: netdev@oss.sgi.com
Subject: [PATCH 2.6.10-rc1] remove NET_HW_FLOWCONTROL
Date: Mon, 25 Oct 2004 21:20:42 +0100 [thread overview]
Message-ID: <20041025202042.GA4930@infradead.org> (raw)
CONFIG_NET_HW_FLOWCONTROL is entirely unused now, and superceded by NAPI in
practice, so remove the dead code
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
diff -purN linux-2.6.9/include/linux/netdevice.h linux/include/linux/netdevice.h
--- linux-2.6.9/include/linux/netdevice.h 2004-10-23 13:07:34.000000000 +0200
+++ linux/include/linux/netdevice.h 2004-10-25 22:08:54.374374481 +0200
@@ -930,8 +930,6 @@ extern void netdev_state_change(struct
/* Load a device via the kmod */
extern void dev_load(const char *name);
extern void dev_mcast_init(void);
-extern int netdev_register_fc(struct net_device *dev, void (*stimul)(struct net_device *dev));
-extern void netdev_unregister_fc(int bit);
extern int netdev_max_backlog;
extern int weight_p;
extern unsigned long netdev_fc_xoff;
diff -purN linux-2.6.9/net/Kconfig linux/net/Kconfig
--- linux-2.6.9/net/Kconfig 2004-10-18 23:53:10.000000000 +0200
+++ linux/net/Kconfig 2004-10-25 22:14:22.940935390 +0200
@@ -564,24 +564,6 @@ config WAN_ROUTER
If unsure, say N.
-config NET_HW_FLOWCONTROL
- bool "Forwarding between high speed interfaces"
- depends on EXPERIMENTAL
- ---help---
- This option enables NIC (Network Interface Card) hardware throttling
- during periods of extreme congestion. At the moment only a couple
- of device drivers support it (really only one -- tulip, a modified
- 8390 driver can be found at
- <ftp://ftp.tux.org/pub/net/ip-routing/fastroute/fastroute-8390.tar.gz>).
-
- Really, this option is applicable to any machine attached to a fast
- enough network, and even a 10 Mb NIC is able to kill a not very slow
- box, such as a 120MHz Pentium.
-
- However, do not say Y here if you did not experience any serious
- problems.
-
-
menu "QoS and/or fair queueing"
config NET_SCHED
diff -purN linux-2.6.9/net/core/dev.c linux/net/core/dev.c
--- linux-2.6.9/net/core/dev.c 2004-10-23 13:07:34.000000000 +0200
+++ linux/net/core/dev.c 2004-10-25 22:14:10.183464383 +0200
@@ -1390,66 +1390,6 @@ int mod_cong = 290;
DEFINE_PER_CPU(struct netif_rx_stats, netdev_rx_stat) = { 0, };
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-atomic_t netdev_dropping = ATOMIC_INIT(0);
-static unsigned long netdev_fc_mask = 1;
-unsigned long netdev_fc_xoff;
-spinlock_t netdev_fc_lock = SPIN_LOCK_UNLOCKED;
-
-static struct
-{
- void (*stimul)(struct net_device *);
- struct net_device *dev;
-} netdev_fc_slots[BITS_PER_LONG];
-
-int netdev_register_fc(struct net_device *dev,
- void (*stimul)(struct net_device *dev))
-{
- int bit = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&netdev_fc_lock, flags);
- if (netdev_fc_mask != ~0UL) {
- bit = ffz(netdev_fc_mask);
- netdev_fc_slots[bit].stimul = stimul;
- netdev_fc_slots[bit].dev = dev;
- set_bit(bit, &netdev_fc_mask);
- clear_bit(bit, &netdev_fc_xoff);
- }
- spin_unlock_irqrestore(&netdev_fc_lock, flags);
- return bit;
-}
-
-void netdev_unregister_fc(int bit)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&netdev_fc_lock, flags);
- if (bit > 0) {
- netdev_fc_slots[bit].stimul = NULL;
- netdev_fc_slots[bit].dev = NULL;
- clear_bit(bit, &netdev_fc_mask);
- clear_bit(bit, &netdev_fc_xoff);
- }
- spin_unlock_irqrestore(&netdev_fc_lock, flags);
-}
-
-static void netdev_wakeup(void)
-{
- unsigned long xoff;
-
- spin_lock(&netdev_fc_lock);
- xoff = netdev_fc_xoff;
- netdev_fc_xoff = 0;
- while (xoff) {
- int i = ffz(~xoff);
- xoff &= ~(1 << i);
- netdev_fc_slots[i].stimul(netdev_fc_slots[i].dev);
- }
- spin_unlock(&netdev_fc_lock);
-}
-#endif
-
static void get_sample_stats(int cpu)
{
#ifdef RAND_LIE
@@ -1559,13 +1499,8 @@ enqueue:
return queue->cng_level;
}
- if (queue->throttle) {
+ if (queue->throttle)
queue->throttle = 0;
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if (atomic_dec_and_test(&netdev_dropping))
- netdev_wakeup();
-#endif
- }
netif_rx_schedule(&queue->backlog_dev);
goto enqueue;
@@ -1574,9 +1509,6 @@ enqueue:
if (!queue->throttle) {
queue->throttle = 1;
__get_cpu_var(netdev_rx_stat).throttled++;
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- atomic_inc(&netdev_dropping);
-#endif
}
drop:
@@ -1848,16 +1780,6 @@ static int process_backlog(struct net_de
if (work >= quota || jiffies - start_time > 1)
break;
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if (queue->throttle &&
- queue->input_pkt_queue.qlen < no_cong_thresh ) {
- queue->throttle = 0;
- if (atomic_dec_and_test(&netdev_dropping)) {
- netdev_wakeup();
- break;
- }
- }
-#endif
}
backlog_dev->quota -= work;
@@ -1872,13 +1794,8 @@ job_done:
smp_mb__before_clear_bit();
netif_poll_enable(backlog_dev);
- if (queue->throttle) {
+ if (queue->throttle)
queue->throttle = 0;
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if (atomic_dec_and_test(&netdev_dropping))
- netdev_wakeup();
-#endif
- }
local_irq_enable();
return 0;
}
@@ -3365,12 +3282,6 @@ EXPORT_SYMBOL(br_handle_frame_hook);
#ifdef CONFIG_KMOD
EXPORT_SYMBOL(dev_load);
#endif
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-EXPORT_SYMBOL(netdev_dropping);
-EXPORT_SYMBOL(netdev_fc_xoff);
-EXPORT_SYMBOL(netdev_register_fc);
-EXPORT_SYMBOL(netdev_unregister_fc);
-#endif
#ifdef CONFIG_NET_CLS_ACT
EXPORT_SYMBOL(ing_filter);
next reply other threads:[~2004-10-25 20:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-25 20:20 Arjan van de Ven [this message]
2004-10-25 20:21 ` [PATCH 2.6.10-rc1] remove NET_HW_FLOWCONTROL Jeff Garzik
2004-10-25 22:36 ` jamal
2004-10-25 23:02 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041025202042.GA4930@infradead.org \
--to=arjan@infradead.org \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.